Digi International Inc. / Mbed 2 deprecated XBeeDM_node_discovery

DigiMesh Node Discovery example for mbed XBeeLib By Digi

Dependencies:   XBeeLib mbed

Fork of XBeeZB_node_discovery by Digi International Inc.

Description

This example shows how to discover remote XBee modules based on their NI (Node Identifier) instead of using its 64-bit network address

The example demonstrates the two ways of discovering nodes:

  • Search for all nodes to identify
  • Search for only one node

See Discovering nodes in the network chapter for more information.

Common Setup

Make sure you have a valid Example Common Setup

Example Setup

You need to have your remote XBee module with a valid Node Identifier "NI" (Remember that by default its value is a space). Then customize the REMOTE_NODE_ID define in the application with that value.

Running the example

Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter.

Once joined to the coordinator, the application will try to discover the remote XBee module with NI equal to the defined REMOTE_NODE_ID. If found, it will send it a 'hello' message. Check in the "Console" tab of the X-CTU connected to the remote XBee module that the message arrived.
Then a node discovery function callback will be registered and a node discovery performed. All remote XBee modules in the network should answer. This library will process each answer and call the registered callback. The callback sends a 'Hello neighbor!' message to each discovered remote XBee module. Check in the "Console" tab of the X-CTU connected to the remote XBee module that the message arrived.

Files at this revision

API Documentation at this revision

Revision 11:4d916ff3fa2c, committed 2016-07-29

Comitter:
hbujanda
Date:
Fri Jul 29 12:15:18 2016 +0200
Parent:
10:4b97421d51af
Commit message:
Automatic upload

Changed in this revision

XBeeLib.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
diff -r 4b97421d51af -r 4d916ff3fa2c XBeeLib.lib
--- a/XBeeLib.lib	Thu Jul 28 10:20:37 2016 +0000
+++ b/XBeeLib.lib	Fri Jul 29 12:15:18 2016 +0200
@@ -1,1 +1,1 @@
-http://developer.mbed.org/teams/Digi-International-Inc/code/XBeeLib/#06522f3a6642
+http://developer.mbed.org/teams/Digi-International-Inc/code/XBeeLib/#b5f4a0e92249

diff -r 4b97421d51af -r 4d916ff3fa2c main.cpp
--- a/main.cpp	Thu Jul 28 10:20:37 2016 +0000
+++ b/main.cpp	Fri Jul 29 12:15:18 2016 +0200
@@ -17,8 +17,8 @@
 using namespace DigiLog;
 #endif
 
-//#error "Replace next define with the remote module's Node Identifier (NI parameter)"
-#define REMOTE_NODE_ID              "1111"
+#error "Replace next define with the remote module's Node Identifier (NI parameter)"
+#define REMOTE_NODE_ID              "MyNodeID"
 
 #define MAX_NODES                   5
 #define NODE_DISCOVERY_TIMEOUT_MS   5000

diff -r 4b97421d51af -r 4d916ff3fa2c mbed.bld
--- a/mbed.bld	Thu Jul 28 10:20:37 2016 +0000
+++ b/mbed.bld	Fri Jul 29 12:15:18 2016 +0200
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/f9eeca106725
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/487b796308b0
\ No newline at end of file