Digi International Inc. / Mbed 2 deprecated XBee802_Receive_Data

802.15.4 Receive Data example for mbed XBeeLib By Digi

Dependencies:   XBeeLib mbed

Description

This example shows how to receive data from a remote XBee802 module.
A remote XBee module sends a packet to our local XBee module though the air. The local XBee module receives the packet and sends it to the mbed module through the serial port. This library decodes the packet and calls a user defined method to process the packet.

See Receiving Data from other module chapter for more information.

Common Setup

Make sure you have a valid Example Common Setup

Example Setup

This example does not require any additional setup.

Running the example

Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter.

While the example is running, go to the "Console" tab of the X-CTU connected to the remote XBee module. Press the "Add API frame to the list" and paste following bytes that create a new broadcast transmit request packet:

7E 00 19 10 01 00 00 00 00 00 00 FF FF FF FE 00 00 48 65 6C 6C 6F 20 58 42 65 65 21 5A

Select the frame and press the "Send selected frame" button to send the frame ("Hello XBee!") to the XBee network.

Verify that the local XBee module has received the frame by accessing the debug interface console terminal. If it was successful, the "Hello XBee!" message will be displayed there.

main.cpp

Committer:
hbujanda
Date:
2016-07-29
Revision:
10:b9dc1600c409
Parent:
7:2e6ea668bc9e

File content as of revision 10:b9dc1600c409:

/**
 * Copyright (c) 2015 Digi International Inc.,
 * All rights not expressly granted are reserved.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this file,
 * You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343
 * =======================================================================
 */

#include "mbed.h"
#include "XBeeLib.h"
#if defined(ENABLE_LOGGING)
#include "DigiLoggerMbedSerial.h"
using namespace DigiLog;
#endif

using namespace XBeeLib;

Serial *log_serial;

static void receive_cb(const RemoteXBee802& remote, bool broadcast, const uint8_t *const data, uint16_t len)
{
    if (remote.is_valid_addr16b()) {
        log_serial->printf("\r\nGot a %s 16-bit RX packet [%04x], len %d\r\nData: ", broadcast ? "BROADCAST" : "UNICAST", remote.get_addr16(), len);
    } else {
        log_serial->printf("\r\nGot a %s 64-bit RX packet [%08x:%08x], len %d\r\nData: ", broadcast ? "BROADCAST" : "UNICAST", remote.get_addr64(), len);
    }

    for (int i = 0; i < len; i++)
        log_serial->printf("%02x ", data[i]);

    log_serial->printf("\r\n");
}

int main()
{
    log_serial = new Serial(DEBUG_TX, DEBUG_RX);
    log_serial->baud(9600);
    log_serial->printf("Sample application to demo how to receive unicast and broadcast data with the XBee802\r\n\r\n");
    log_serial->printf(XB_LIB_BANNER);

#if defined(ENABLE_LOGGING)
    new DigiLoggerMbedSerial(log_serial, LogLevelInfo);
#endif

    XBee802 xbee = XBee802(RADIO_TX, RADIO_RX, RADIO_RESET, NC, NC, 9600);

    /* Register callback */
    xbee.register_receive_cb(&receive_cb);

    RadioStatus const radioStatus = xbee.init();
    MBED_ASSERT(radioStatus == Success);

    while (true) {
        xbee.process_rx_frames();
        wait_ms(100);
        log_serial->printf(".");
    }

    delete(log_serial);
}