MBED code for Xbee module running on solar car
Dependencies: XBeeLib mbed CUER_CAN
Fork of XBee802_Send_Data by
main.cpp
- Committer:
- hbujanda
- Date:
- 2015-04-29
- Revision:
- 0:a8cde1e2de5b
- Child:
- 2:60581ca6978e
File content as of revision 0:a8cde1e2de5b:
/** * Copyright (c) 2015 Digi International Inc., * All rights not expressly granted are reserved. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this file, * You can obtain one at http://mozilla.org/MPL/2.0/. * * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343 * ======================================================================= */ #include "mbed.h" #include "XBeeLib.h" #if defined(ENABLE_LOGGING) #include "DigiLoggerMbedSerial.h" using namespace DigiLog; #endif // TODO Replace with the MSB of the remote module's 64-bit address (SH parameter) #define REMOTE_NODE_ADDR64_MSB ((uint32_t)0x0013A200) // TODO Replace with the LSB of the remote module's 64-bit address (SL parameter) #define REMOTE_NODE_ADDR64_LSB ((uint32_t)0x40D2B03E) // TODO Replace with the remote module's 16-bit address (MY parameter) #define REMOTE_NODE_ADDR16 ((uint16_t)0x1111) using namespace XBeeLib; Serial *log_serial; static void send_broadcast_data(XBee802& xbee) { const char data[] = "send_broadcast_data"; const uint16_t data_len = strlen(data); const TxStatus txStatus = xbee.send_data_broadcast((const uint8_t *)data, data_len); if (txStatus == TxStatusSuccess) log_serial->printf("send_broadcast_data OK\r\n"); else log_serial->printf("send_broadcast_data failed with %d\r\n", (int) txStatus); } static void send_data_to_remote_node(XBee802& xbee, const RemoteXBee802& RemoteDevice) { const char data[] = "send_data_to_remote_node"; const uint16_t data_len = strlen(data); const TxStatus txStatus = xbee.send_data(RemoteDevice, (const uint8_t *)data, data_len); if (txStatus == TxStatusSuccess) log_serial->printf("send_data_to_remote_node OK\r\n"); else log_serial->printf("send_data_to_remote_node failed with %d\r\n", (int) txStatus); } int main() { log_serial = new Serial(DEBUG_TX, DEBUG_RX); log_serial->baud(9600); log_serial->printf("Sample application to demo how to send unicast and broadcast data with the XBee802\r\n\r\n"); log_serial->printf(XB_LIB_BANNER); #if defined(ENABLE_LOGGING) new DigiLoggerMbedSerial(log_serial, LogLevelInfo); #endif XBee802 xbee = XBee802(RADIO_TX, RADIO_RX, RADIO_RESET, NC, NC, 9600); RadioStatus radioStatus = xbee.init(); MBED_ASSERT(radioStatus == Success); const RemoteXBee802 remoteDevice64b = RemoteXBee802(Addr64(REMOTE_NODE_ADDR64_MSB, REMOTE_NODE_ADDR64_LSB)); const RemoteXBee802 remoteDevice16b = RemoteXBee802(REMOTE_NODE_ADDR16); send_broadcast_data(xbee); send_data_to_remote_node(xbee, remoteDevice64b); send_data_to_remote_node(xbee, remoteDevice16b); delete(log_serial); }