![](/media/cache/group/site_id.gif.50x50_q85.jpg)
A "Hello" program for MARMEX_VB library. This application may work 40pin type mbed platforms ;) This application expects to have the MARMEX_VB module on a "MAPLE mini type-B (MARM03-BASE)" baseboard (slot2) with a MARMEX_OB module (on slot1)
Dependencies: MARMEX_VB NokiaLCD mbed
Sample code for MARMEX-VB (MARY-VB) camera module.
This is a very simple program just copies the data from camera to OELD.
Diff: main.cpp
- Revision:
- 0:139f0c46d0fd
- Child:
- 2:7294334432d4
diff -r 000000000000 -r 139f0c46d0fd main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Mon Jun 09 20:14:04 2014 +0000 @@ -0,0 +1,57 @@ +/** Hello program for MARMEX_VB Camera control library + * + * @version 0.1 + * @date 10-Jun-2014 + * + * Released under the Apache License, Version 2.0 : http://mbed.org/handbook/Apache-Licence + * + * ** This program may run on 40pin type mbed platfoms ;) ** + */ + +#include "mbed.h" +#include "MARMEX_OB_oled.h" +#include "MARMEX_VB.h" + +MARMEX_OB_oled oled1( p5, p7, p20, p16, p15 ); // mosi, sclk, cs, rst, power_control -- maple-mini-type-b-board-slot1 +MARMEX_VB camera( p5, p6, p7, p22, p26, p28, p27 ); // mosi, miso, sclk, cs, reset, sda, scl -- maple-mini-type-b-board-slot2 +BusOut led( LED3, LED4 ); + +// image size (default image size) +#define CAMERA_WIDTH MARMEX_VB::QCIF_PIXEL_PER_LINE // 176 pixels(default size) +#define CAMERA_HEIGHT MARMEX_VB::QCIF_LINE_PER_FRAME // 144 lines (default size) + +// screen size +#define OLED_WIDTH MARMEX_OB_oled::WIDTH // 128 pixels +#define OLED_HEIGHT MARMEX_OB_oled::HEIGHT // 128 lines + +// x/y offset to draw center image of the camera +#define X_OFFSET ((CAMERA_WIDTH - OLED_WIDTH ) / 2) +#define Y_OFFSET ((CAMERA_HEIGHT - OLED_HEIGHT) / 2) + +int main() +{ + short buf[ OLED_WIDTH ]; + + led = 0x3; + oled1.cls(); // clear OLED screen + + while ( 1 ) { + + led = 0x1; + camera.open_transfer(); // pause updating the camera buffer + + // data transfer from camera to OLED (line by line copy) + // + for ( int line = 0; line < OLED_HEIGHT; line++ ) { + + // 1 line (128 pixels) data read from camera + camera.read_a_line( buf, line + Y_OFFSET, X_OFFSET, OLED_WIDTH ); + + // 1 line (128 pixels) data write into OLED + oled1.blit565( 0, line, OLED_WIDTH, 1, buf ); + } + + led = 0x2; + camera.close_transfer(); // resume updating the camera buffer + } +}