Bose Automation
modes
Fork of
mbed-rtos
by 
mbed official
Revision 32:1e1e7730b6c8, committed 2014-06-16
- Comitter:
- jvanhook
- Date:
- Mon Jun 16 15:36:29 2014 +0000
- Parent:
- 31:015df9e602b6
- Commit message:
- dfsdfgsdf
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/LPC17xx.h Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,1032 @@
+/******************************************************************************
+ * @file: LPC17xx.h
+ * @purpose: CMSIS Cortex-M3 Core Peripheral Access Layer Header File for
+ * NXP LPC17xx Device Series
+ * @version: V1.09
+ * @date: 17. March 2010
+ *----------------------------------------------------------------------------
+ *
+ * Copyright (C) 2008 ARM Limited. All rights reserved.
+ *
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M3
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef __LPC17xx_H__
+#define __LPC17xx_H__
+
+/*
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** LPC17xx Specific Interrupt Numbers *******************************************************/
+ WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
+ TIMER0_IRQn = 1, /*!< Timer0 Interrupt */
+ TIMER1_IRQn = 2, /*!< Timer1 Interrupt */
+ TIMER2_IRQn = 3, /*!< Timer2 Interrupt */
+ TIMER3_IRQn = 4, /*!< Timer3 Interrupt */
+ UART0_IRQn = 5, /*!< UART0 Interrupt */
+ UART1_IRQn = 6, /*!< UART1 Interrupt */
+ UART2_IRQn = 7, /*!< UART2 Interrupt */
+ UART3_IRQn = 8, /*!< UART3 Interrupt */
+ PWM1_IRQn = 9, /*!< PWM1 Interrupt */
+ I2C0_IRQn = 10, /*!< I2C0 Interrupt */
+ I2C1_IRQn = 11, /*!< I2C1 Interrupt */
+ I2C2_IRQn = 12, /*!< I2C2 Interrupt */
+ SPI_IRQn = 13, /*!< SPI Interrupt */
+ SSP0_IRQn = 14, /*!< SSP0 Interrupt */
+ SSP1_IRQn = 15, /*!< SSP1 Interrupt */
+ PLL0_IRQn = 16, /*!< PLL0 Lock (Main PLL) Interrupt */
+ RTC_IRQn = 17, /*!< Real Time Clock Interrupt */
+ EINT0_IRQn = 18, /*!< External Interrupt 0 Interrupt */
+ EINT1_IRQn = 19, /*!< External Interrupt 1 Interrupt */
+ EINT2_IRQn = 20, /*!< External Interrupt 2 Interrupt */
+ EINT3_IRQn = 21, /*!< External Interrupt 3 Interrupt */
+ ADC_IRQn = 22, /*!< A/D Converter Interrupt */
+ BOD_IRQn = 23, /*!< Brown-Out Detect Interrupt */
+ USB_IRQn = 24, /*!< USB Interrupt */
+ CAN_IRQn = 25, /*!< CAN Interrupt */
+ DMA_IRQn = 26, /*!< General Purpose DMA Interrupt */
+ I2S_IRQn = 27, /*!< I2S Interrupt */
+ ENET_IRQn = 28, /*!< Ethernet Interrupt */
+ RIT_IRQn = 29, /*!< Repetitive Interrupt Timer Interrupt */
+ MCPWM_IRQn = 30, /*!< Motor Control PWM Interrupt */
+ QEI_IRQn = 31, /*!< Quadrature Encoder Interface Interrupt */
+ PLL1_IRQn = 32, /*!< PLL1 Lock (USB PLL) Interrupt */
+ USBActivity_IRQn = 33, /* USB Activity interrupt */
+ CANActivity_IRQn = 34, /* CAN Activity interrupt */
+} IRQn_Type;
+
+
+/*
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/* Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+
+#include <core_cm3.h> /* Cortex-M3 processor and core peripherals */
+#include "system_LPC17xx.h" /* System Header */
+
+
+/******************************************************************************/
+/* Device Specific Peripheral registers structures */
+/******************************************************************************/
+
+#if defined ( __CC_ARM )
+#pragma anon_unions
+#endif
+
+/*------------- System Control (SC) ------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t FLASHCFG; /* Flash Accelerator Module */
+ uint32_t RESERVED0[31];
+ __IO uint32_t PLL0CON; /* Clocking and Power Control */
+ __IO uint32_t PLL0CFG;
+ __I uint32_t PLL0STAT;
+ __O uint32_t PLL0FEED;
+ uint32_t RESERVED1[4];
+ __IO uint32_t PLL1CON;
+ __IO uint32_t PLL1CFG;
+ __I uint32_t PLL1STAT;
+ __O uint32_t PLL1FEED;
+ uint32_t RESERVED2[4];
+ __IO uint32_t PCON;
+ __IO uint32_t PCONP;
+ uint32_t RESERVED3[15];
+ __IO uint32_t CCLKCFG;
+ __IO uint32_t USBCLKCFG;
+ __IO uint32_t CLKSRCSEL;
+ __IO uint32_t CANSLEEPCLR;
+ __IO uint32_t CANWAKEFLAGS;
+ uint32_t RESERVED4[10];
+ __IO uint32_t EXTINT; /* External Interrupts */
+ uint32_t RESERVED5;
+ __IO uint32_t EXTMODE;
+ __IO uint32_t EXTPOLAR;
+ uint32_t RESERVED6[12];
+ __IO uint32_t RSID; /* Reset */
+ uint32_t RESERVED7[7];
+ __IO uint32_t SCS; /* Syscon Miscellaneous Registers */
+ __IO uint32_t IRCTRIM; /* Clock Dividers */
+ __IO uint32_t PCLKSEL0;
+ __IO uint32_t PCLKSEL1;
+ uint32_t RESERVED8[4];
+ __IO uint32_t USBIntSt; /* USB Device/OTG Interrupt Register */
+ __IO uint32_t DMAREQSEL;
+ __IO uint32_t CLKOUTCFG; /* Clock Output Configuration */
+ } LPC_SC_TypeDef;
+
+/*------------- Pin Connect Block (PINCON) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t PINSEL0;
+ __IO uint32_t PINSEL1;
+ __IO uint32_t PINSEL2;
+ __IO uint32_t PINSEL3;
+ __IO uint32_t PINSEL4;
+ __IO uint32_t PINSEL5;
+ __IO uint32_t PINSEL6;
+ __IO uint32_t PINSEL7;
+ __IO uint32_t PINSEL8;
+ __IO uint32_t PINSEL9;
+ __IO uint32_t PINSEL10;
+ uint32_t RESERVED0[5];
+ __IO uint32_t PINMODE0;
+ __IO uint32_t PINMODE1;
+ __IO uint32_t PINMODE2;
+ __IO uint32_t PINMODE3;
+ __IO uint32_t PINMODE4;
+ __IO uint32_t PINMODE5;
+ __IO uint32_t PINMODE6;
+ __IO uint32_t PINMODE7;
+ __IO uint32_t PINMODE8;
+ __IO uint32_t PINMODE9;
+ __IO uint32_t PINMODE_OD0;
+ __IO uint32_t PINMODE_OD1;
+ __IO uint32_t PINMODE_OD2;
+ __IO uint32_t PINMODE_OD3;
+ __IO uint32_t PINMODE_OD4;
+ __IO uint32_t I2CPADCFG;
+} LPC_PINCON_TypeDef;
+
+/*------------- General Purpose Input/Output (GPIO) --------------------------*/
+typedef struct
+{
+ union {
+ __IO uint32_t FIODIR;
+ struct {
+ __IO uint16_t FIODIRL;
+ __IO uint16_t FIODIRH;
+ };
+ struct {
+ __IO uint8_t FIODIR0;
+ __IO uint8_t FIODIR1;
+ __IO uint8_t FIODIR2;
+ __IO uint8_t FIODIR3;
+ };
+ };
+ uint32_t RESERVED0[3];
+ union {
+ __IO uint32_t FIOMASK;
+ struct {
+ __IO uint16_t FIOMASKL;
+ __IO uint16_t FIOMASKH;
+ };
+ struct {
+ __IO uint8_t FIOMASK0;
+ __IO uint8_t FIOMASK1;
+ __IO uint8_t FIOMASK2;
+ __IO uint8_t FIOMASK3;
+ };
+ };
+ union {
+ __IO uint32_t FIOPIN;
+ struct {
+ __IO uint16_t FIOPINL;
+ __IO uint16_t FIOPINH;
+ };
+ struct {
+ __IO uint8_t FIOPIN0;
+ __IO uint8_t FIOPIN1;
+ __IO uint8_t FIOPIN2;
+ __IO uint8_t FIOPIN3;
+ };
+ };
+ union {
+ __IO uint32_t FIOSET;
+ struct {
+ __IO uint16_t FIOSETL;
+ __IO uint16_t FIOSETH;
+ };
+ struct {
+ __IO uint8_t FIOSET0;
+ __IO uint8_t FIOSET1;
+ __IO uint8_t FIOSET2;
+ __IO uint8_t FIOSET3;
+ };
+ };
+ union {
+ __O uint32_t FIOCLR;
+ struct {
+ __O uint16_t FIOCLRL;
+ __O uint16_t FIOCLRH;
+ };
+ struct {
+ __O uint8_t FIOCLR0;
+ __O uint8_t FIOCLR1;
+ __O uint8_t FIOCLR2;
+ __O uint8_t FIOCLR3;
+ };
+ };
+} LPC_GPIO_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IntStatus;
+ __I uint32_t IO0IntStatR;
+ __I uint32_t IO0IntStatF;
+ __O uint32_t IO0IntClr;
+ __IO uint32_t IO0IntEnR;
+ __IO uint32_t IO0IntEnF;
+ uint32_t RESERVED0[3];
+ __I uint32_t IO2IntStatR;
+ __I uint32_t IO2IntStatF;
+ __O uint32_t IO2IntClr;
+ __IO uint32_t IO2IntEnR;
+ __IO uint32_t IO2IntEnF;
+} LPC_GPIOINT_TypeDef;
+
+/*------------- Timer (TIM) --------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ uint32_t RESERVED0[2];
+ __IO uint32_t EMR;
+ uint32_t RESERVED1[12];
+ __IO uint32_t CTCR;
+} LPC_TIM_TypeDef;
+
+/*------------- Pulse-Width Modulation (PWM) ---------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ __I uint32_t CR2;
+ __I uint32_t CR3;
+ uint32_t RESERVED0;
+ __IO uint32_t MR4;
+ __IO uint32_t MR5;
+ __IO uint32_t MR6;
+ __IO uint32_t PCR;
+ __IO uint32_t LER;
+ uint32_t RESERVED1[7];
+ __IO uint32_t CTCR;
+} LPC_PWM_TypeDef;
+
+/*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __IO uint32_t FIFOLVL;
+} LPC_UART_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __IO uint32_t FIFOLVL;
+} LPC_UART0_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t MCR;
+ uint8_t RESERVED2[3];
+ __I uint8_t LSR;
+ uint8_t RESERVED3[3];
+ __I uint8_t MSR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t SCR;
+ uint8_t RESERVED5[3];
+ __IO uint32_t ACR;
+ uint32_t RESERVED6;
+ __IO uint32_t FDR;
+ uint32_t RESERVED7;
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];
+ __IO uint32_t FIFOLVL;
+} LPC_UART1_TypeDef;
+
+/*------------- Serial Peripheral Interface (SPI) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t SPCR;
+ __I uint32_t SPSR;
+ __IO uint32_t SPDR;
+ __IO uint32_t SPCCR;
+ uint32_t RESERVED0[3];
+ __IO uint32_t SPINT;
+} LPC_SPI_TypeDef;
+
+/*------------- Synchronous Serial Communication (SSP) -----------------------*/
+typedef struct
+{
+ __IO uint32_t CR0;
+ __IO uint32_t CR1;
+ __IO uint32_t DR;
+ __I uint32_t SR;
+ __IO uint32_t CPSR;
+ __IO uint32_t IMSC;
+ __IO uint32_t RIS;
+ __IO uint32_t MIS;
+ __IO uint32_t ICR;
+ __IO uint32_t DMACR;
+} LPC_SSP_TypeDef;
+
+/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2CONSET;
+ __I uint32_t I2STAT;
+ __IO uint32_t I2DAT;
+ __IO uint32_t I2ADR0;
+ __IO uint32_t I2SCLH;
+ __IO uint32_t I2SCLL;
+ __O uint32_t I2CONCLR;
+ __IO uint32_t MMCTRL;
+ __IO uint32_t I2ADR1;
+ __IO uint32_t I2ADR2;
+ __IO uint32_t I2ADR3;
+ __I uint32_t I2DATA_BUFFER;
+ __IO uint32_t I2MASK0;
+ __IO uint32_t I2MASK1;
+ __IO uint32_t I2MASK2;
+ __IO uint32_t I2MASK3;
+} LPC_I2C_TypeDef;
+
+/*------------- Inter IC Sound (I2S) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2SDAO;
+ __IO uint32_t I2SDAI;
+ __O uint32_t I2STXFIFO;
+ __I uint32_t I2SRXFIFO;
+ __I uint32_t I2SSTATE;
+ __IO uint32_t I2SDMA1;
+ __IO uint32_t I2SDMA2;
+ __IO uint32_t I2SIRQ;
+ __IO uint32_t I2STXRATE;
+ __IO uint32_t I2SRXRATE;
+ __IO uint32_t I2STXBITRATE;
+ __IO uint32_t I2SRXBITRATE;
+ __IO uint32_t I2STXMODE;
+ __IO uint32_t I2SRXMODE;
+} LPC_I2S_TypeDef;
+
+/*------------- Repetitive Interrupt Timer (RIT) -----------------------------*/
+typedef struct
+{
+ __IO uint32_t RICOMPVAL;
+ __IO uint32_t RIMASK;
+ __IO uint8_t RICTRL;
+ uint8_t RESERVED0[3];
+ __IO uint32_t RICOUNTER;
+} LPC_RIT_TypeDef;
+
+/*------------- Real-Time Clock (RTC) ----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t ILR;
+ uint8_t RESERVED0[7];
+ __IO uint8_t CCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t CIIR;
+ uint8_t RESERVED2[3];
+ __IO uint8_t AMR;
+ uint8_t RESERVED3[3];
+ __I uint32_t CTIME0;
+ __I uint32_t CTIME1;
+ __I uint32_t CTIME2;
+ __IO uint8_t SEC;
+ uint8_t RESERVED4[3];
+ __IO uint8_t MIN;
+ uint8_t RESERVED5[3];
+ __IO uint8_t HOUR;
+ uint8_t RESERVED6[3];
+ __IO uint8_t DOM;
+ uint8_t RESERVED7[3];
+ __IO uint8_t DOW;
+ uint8_t RESERVED8[3];
+ __IO uint16_t DOY;
+ uint16_t RESERVED9;
+ __IO uint8_t MONTH;
+ uint8_t RESERVED10[3];
+ __IO uint16_t YEAR;
+ uint16_t RESERVED11;
+ __IO uint32_t CALIBRATION;
+ __IO uint32_t GPREG0;
+ __IO uint32_t GPREG1;
+ __IO uint32_t GPREG2;
+ __IO uint32_t GPREG3;
+ __IO uint32_t GPREG4;
+ __IO uint8_t RTC_AUXEN;
+ uint8_t RESERVED12[3];
+ __IO uint8_t RTC_AUX;
+ uint8_t RESERVED13[3];
+ __IO uint8_t ALSEC;
+ uint8_t RESERVED14[3];
+ __IO uint8_t ALMIN;
+ uint8_t RESERVED15[3];
+ __IO uint8_t ALHOUR;
+ uint8_t RESERVED16[3];
+ __IO uint8_t ALDOM;
+ uint8_t RESERVED17[3];
+ __IO uint8_t ALDOW;
+ uint8_t RESERVED18[3];
+ __IO uint16_t ALDOY;
+ uint16_t RESERVED19;
+ __IO uint8_t ALMON;
+ uint8_t RESERVED20[3];
+ __IO uint16_t ALYEAR;
+ uint16_t RESERVED21;
+} LPC_RTC_TypeDef;
+
+/*------------- Watchdog Timer (WDT) -----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t WDMOD;
+ uint8_t RESERVED0[3];
+ __IO uint32_t WDTC;
+ __O uint8_t WDFEED;
+ uint8_t RESERVED1[3];
+ __I uint32_t WDTV;
+ __IO uint32_t WDCLKSEL;
+} LPC_WDT_TypeDef;
+
+/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t ADCR;
+ __IO uint32_t ADGDR;
+ uint32_t RESERVED0;
+ __IO uint32_t ADINTEN;
+ __I uint32_t ADDR0;
+ __I uint32_t ADDR1;
+ __I uint32_t ADDR2;
+ __I uint32_t ADDR3;
+ __I uint32_t ADDR4;
+ __I uint32_t ADDR5;
+ __I uint32_t ADDR6;
+ __I uint32_t ADDR7;
+ __I uint32_t ADSTAT;
+ __IO uint32_t ADTRM;
+} LPC_ADC_TypeDef;
+
+/*------------- Digital-to-Analog Converter (DAC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t DACR;
+ __IO uint32_t DACCTRL;
+ __IO uint16_t DACCNTVAL;
+} LPC_DAC_TypeDef;
+
+/*------------- Motor Control Pulse-Width Modulation (MCPWM) -----------------*/
+typedef struct
+{
+ __I uint32_t MCCON;
+ __O uint32_t MCCON_SET;
+ __O uint32_t MCCON_CLR;
+ __I uint32_t MCCAPCON;
+ __O uint32_t MCCAPCON_SET;
+ __O uint32_t MCCAPCON_CLR;
+ __IO uint32_t MCTIM0;
+ __IO uint32_t MCTIM1;
+ __IO uint32_t MCTIM2;
+ __IO uint32_t MCPER0;
+ __IO uint32_t MCPER1;
+ __IO uint32_t MCPER2;
+ __IO uint32_t MCPW0;
+ __IO uint32_t MCPW1;
+ __IO uint32_t MCPW2;
+ __IO uint32_t MCDEADTIME;
+ __IO uint32_t MCCCP;
+ __IO uint32_t MCCR0;
+ __IO uint32_t MCCR1;
+ __IO uint32_t MCCR2;
+ __I uint32_t MCINTEN;
+ __O uint32_t MCINTEN_SET;
+ __O uint32_t MCINTEN_CLR;
+ __I uint32_t MCCNTCON;
+ __O uint32_t MCCNTCON_SET;
+ __O uint32_t MCCNTCON_CLR;
+ __I uint32_t MCINTFLAG;
+ __O uint32_t MCINTFLAG_SET;
+ __O uint32_t MCINTFLAG_CLR;
+ __O uint32_t MCCAP_CLR;
+} LPC_MCPWM_TypeDef;
+
+/*------------- Quadrature Encoder Interface (QEI) ---------------------------*/
+typedef struct
+{
+ __O uint32_t QEICON;
+ __I uint32_t QEISTAT;
+ __IO uint32_t QEICONF;
+ __I uint32_t QEIPOS;
+ __IO uint32_t QEIMAXPOS;
+ __IO uint32_t CMPOS0;
+ __IO uint32_t CMPOS1;
+ __IO uint32_t CMPOS2;
+ __I uint32_t INXCNT;
+ __IO uint32_t INXCMP;
+ __IO uint32_t QEILOAD;
+ __I uint32_t QEITIME;
+ __I uint32_t QEIVEL;
+ __I uint32_t QEICAP;
+ __IO uint32_t VELCOMP;
+ __IO uint32_t FILTER;
+ uint32_t RESERVED0[998];
+ __O uint32_t QEIIEC;
+ __O uint32_t QEIIES;
+ __I uint32_t QEIINTSTAT;
+ __I uint32_t QEIIE;
+ __O uint32_t QEICLR;
+ __O uint32_t QEISET;
+} LPC_QEI_TypeDef;
+
+/*------------- Controller Area Network (CAN) --------------------------------*/
+typedef struct
+{
+ __IO uint32_t mask[512]; /* ID Masks */
+} LPC_CANAF_RAM_TypeDef;
+
+typedef struct /* Acceptance Filter Registers */
+{
+ __IO uint32_t AFMR;
+ __IO uint32_t SFF_sa;
+ __IO uint32_t SFF_GRP_sa;
+ __IO uint32_t EFF_sa;
+ __IO uint32_t EFF_GRP_sa;
+ __IO uint32_t ENDofTable;
+ __I uint32_t LUTerrAd;
+ __I uint32_t LUTerr;
+ __IO uint32_t FCANIE;
+ __IO uint32_t FCANIC0;
+ __IO uint32_t FCANIC1;
+} LPC_CANAF_TypeDef;
+
+typedef struct /* Central Registers */
+{
+ __I uint32_t CANTxSR;
+ __I uint32_t CANRxSR;
+ __I uint32_t CANMSR;
+} LPC_CANCR_TypeDef;
+
+typedef struct /* Controller Registers */
+{
+ __IO uint32_t MOD;
+ __O uint32_t CMR;
+ __IO uint32_t GSR;
+ __I uint32_t ICR;
+ __IO uint32_t IER;
+ __IO uint32_t BTR;
+ __IO uint32_t EWL;
+ __I uint32_t SR;
+ __IO uint32_t RFS;
+ __IO uint32_t RID;
+ __IO uint32_t RDA;
+ __IO uint32_t RDB;
+ __IO uint32_t TFI1;
+ __IO uint32_t TID1;
+ __IO uint32_t TDA1;
+ __IO uint32_t TDB1;
+ __IO uint32_t TFI2;
+ __IO uint32_t TID2;
+ __IO uint32_t TDA2;
+ __IO uint32_t TDB2;
+ __IO uint32_t TFI3;
+ __IO uint32_t TID3;
+ __IO uint32_t TDA3;
+ __IO uint32_t TDB3;
+} LPC_CAN_TypeDef;
+
+/*------------- General Purpose Direct Memory Access (GPDMA) -----------------*/
+typedef struct /* Common Registers */
+{
+ __I uint32_t DMACIntStat;
+ __I uint32_t DMACIntTCStat;
+ __O uint32_t DMACIntTCClear;
+ __I uint32_t DMACIntErrStat;
+ __O uint32_t DMACIntErrClr;
+ __I uint32_t DMACRawIntTCStat;
+ __I uint32_t DMACRawIntErrStat;
+ __I uint32_t DMACEnbldChns;
+ __IO uint32_t DMACSoftBReq;
+ __IO uint32_t DMACSoftSReq;
+ __IO uint32_t DMACSoftLBReq;
+ __IO uint32_t DMACSoftLSReq;
+ __IO uint32_t DMACConfig;
+ __IO uint32_t DMACSync;
+} LPC_GPDMA_TypeDef;
+
+typedef struct /* Channel Registers */
+{
+ __IO uint32_t DMACCSrcAddr;
+ __IO uint32_t DMACCDestAddr;
+ __IO uint32_t DMACCLLI;
+ __IO uint32_t DMACCControl;
+ __IO uint32_t DMACCConfig;
+} LPC_GPDMACH_TypeDef;
+
+/*------------- Universal Serial Bus (USB) -----------------------------------*/
+typedef struct
+{
+ __I uint32_t HcRevision; /* USB Host Registers */
+ __IO uint32_t HcControl;
+ __IO uint32_t HcCommandStatus;
+ __IO uint32_t HcInterruptStatus;
+ __IO uint32_t HcInterruptEnable;
+ __IO uint32_t HcInterruptDisable;
+ __IO uint32_t HcHCCA;
+ __I uint32_t HcPeriodCurrentED;
+ __IO uint32_t HcControlHeadED;
+ __IO uint32_t HcControlCurrentED;
+ __IO uint32_t HcBulkHeadED;
+ __IO uint32_t HcBulkCurrentED;
+ __I uint32_t HcDoneHead;
+ __IO uint32_t HcFmInterval;
+ __I uint32_t HcFmRemaining;
+ __I uint32_t HcFmNumber;
+ __IO uint32_t HcPeriodicStart;
+ __IO uint32_t HcLSTreshold;
+ __IO uint32_t HcRhDescriptorA;
+ __IO uint32_t HcRhDescriptorB;
+ __IO uint32_t HcRhStatus;
+ __IO uint32_t HcRhPortStatus1;
+ __IO uint32_t HcRhPortStatus2;
+ uint32_t RESERVED0[40];
+ __I uint32_t Module_ID;
+
+ __I uint32_t OTGIntSt; /* USB On-The-Go Registers */
+ __IO uint32_t OTGIntEn;
+ __O uint32_t OTGIntSet;
+ __O uint32_t OTGIntClr;
+ __IO uint32_t OTGStCtrl;
+ __IO uint32_t OTGTmr;
+ uint32_t RESERVED1[58];
+
+ __I uint32_t USBDevIntSt; /* USB Device Interrupt Registers */
+ __IO uint32_t USBDevIntEn;
+ __O uint32_t USBDevIntClr;
+ __O uint32_t USBDevIntSet;
+
+ __O uint32_t USBCmdCode; /* USB Device SIE Command Registers */
+ __I uint32_t USBCmdData;
+
+ __I uint32_t USBRxData; /* USB Device Transfer Registers */
+ __O uint32_t USBTxData;
+ __I uint32_t USBRxPLen;
+ __O uint32_t USBTxPLen;
+ __IO uint32_t USBCtrl;
+ __O uint32_t USBDevIntPri;
+
+ __I uint32_t USBEpIntSt; /* USB Device Endpoint Interrupt Regs */
+ __IO uint32_t USBEpIntEn;
+ __O uint32_t USBEpIntClr;
+ __O uint32_t USBEpIntSet;
+ __O uint32_t USBEpIntPri;
+
+ __IO uint32_t USBReEp; /* USB Device Endpoint Realization Reg*/
+ __O uint32_t USBEpInd;
+ __IO uint32_t USBMaxPSize;
+
+ __I uint32_t USBDMARSt; /* USB Device DMA Registers */
+ __O uint32_t USBDMARClr;
+ __O uint32_t USBDMARSet;
+ uint32_t RESERVED2[9];
+ __IO uint32_t USBUDCAH;
+ __I uint32_t USBEpDMASt;
+ __O uint32_t USBEpDMAEn;
+ __O uint32_t USBEpDMADis;
+ __I uint32_t USBDMAIntSt;
+ __IO uint32_t USBDMAIntEn;
+ uint32_t RESERVED3[2];
+ __I uint32_t USBEoTIntSt;
+ __O uint32_t USBEoTIntClr;
+ __O uint32_t USBEoTIntSet;
+ __I uint32_t USBNDDRIntSt;
+ __O uint32_t USBNDDRIntClr;
+ __O uint32_t USBNDDRIntSet;
+ __I uint32_t USBSysErrIntSt;
+ __O uint32_t USBSysErrIntClr;
+ __O uint32_t USBSysErrIntSet;
+ uint32_t RESERVED4[15];
+
+ union {
+ __I uint32_t I2C_RX; /* USB OTG I2C Registers */
+ __O uint32_t I2C_TX;
+ };
+ __I uint32_t I2C_STS;
+ __IO uint32_t I2C_CTL;
+ __IO uint32_t I2C_CLKHI;
+ __O uint32_t I2C_CLKLO;
+ uint32_t RESERVED5[824];
+
+ union {
+ __IO uint32_t USBClkCtrl; /* USB Clock Control Registers */
+ __IO uint32_t OTGClkCtrl;
+ };
+ union {
+ __I uint32_t USBClkSt;
+ __I uint32_t OTGClkSt;
+ };
+} LPC_USB_TypeDef;
+
+/*------------- Ethernet Media Access Controller (EMAC) ----------------------*/
+typedef struct
+{
+ __IO uint32_t MAC1; /* MAC Registers */
+ __IO uint32_t MAC2;
+ __IO uint32_t IPGT;
+ __IO uint32_t IPGR;
+ __IO uint32_t CLRT;
+ __IO uint32_t MAXF;
+ __IO uint32_t SUPP;
+ __IO uint32_t TEST;
+ __IO uint32_t MCFG;
+ __IO uint32_t MCMD;
+ __IO uint32_t MADR;
+ __O uint32_t MWTD;
+ __I uint32_t MRDD;
+ __I uint32_t MIND;
+ uint32_t RESERVED0[2];
+ __IO uint32_t SA0;
+ __IO uint32_t SA1;
+ __IO uint32_t SA2;
+ uint32_t RESERVED1[45];
+ __IO uint32_t Command; /* Control Registers */
+ __I uint32_t Status;
+ __IO uint32_t RxDescriptor;
+ __IO uint32_t RxStatus;
+ __IO uint32_t RxDescriptorNumber;
+ __I uint32_t RxProduceIndex;
+ __IO uint32_t RxConsumeIndex;
+ __IO uint32_t TxDescriptor;
+ __IO uint32_t TxStatus;
+ __IO uint32_t TxDescriptorNumber;
+ __IO uint32_t TxProduceIndex;
+ __I uint32_t TxConsumeIndex;
+ uint32_t RESERVED2[10];
+ __I uint32_t TSV0;
+ __I uint32_t TSV1;
+ __I uint32_t RSV;
+ uint32_t RESERVED3[3];
+ __IO uint32_t FlowControlCounter;
+ __I uint32_t FlowControlStatus;
+ uint32_t RESERVED4[34];
+ __IO uint32_t RxFilterCtrl; /* Rx Filter Registers */
+ __IO uint32_t RxFilterWoLStatus;
+ __IO uint32_t RxFilterWoLClear;
+ uint32_t RESERVED5;
+ __IO uint32_t HashFilterL;
+ __IO uint32_t HashFilterH;
+ uint32_t RESERVED6[882];
+ __I uint32_t IntStatus; /* Module Control Registers */
+ __IO uint32_t IntEnable;
+ __O uint32_t IntClear;
+ __O uint32_t IntSet;
+ uint32_t RESERVED7;
+ __IO uint32_t PowerDown;
+ uint32_t RESERVED8;
+ __IO uint32_t Module_ID;
+} LPC_EMAC_TypeDef;
+
+#if defined ( __CC_ARM )
+#pragma no_anon_unions
+#endif
+
+
+/******************************************************************************/
+/* Peripheral memory map */
+/******************************************************************************/
+/* Base addresses */
+#define LPC_FLASH_BASE (0x00000000UL)
+#define LPC_RAM_BASE (0x10000000UL)
+#define LPC_GPIO_BASE (0x2009C000UL)
+#define LPC_APB0_BASE (0x40000000UL)
+#define LPC_APB1_BASE (0x40080000UL)
+#define LPC_AHB_BASE (0x50000000UL)
+#define LPC_CM3_BASE (0xE0000000UL)
+
+/* APB0 peripherals */
+#define LPC_WDT_BASE (LPC_APB0_BASE + 0x00000)
+#define LPC_TIM0_BASE (LPC_APB0_BASE + 0x04000)
+#define LPC_TIM1_BASE (LPC_APB0_BASE + 0x08000)
+#define LPC_UART0_BASE (LPC_APB0_BASE + 0x0C000)
+#define LPC_UART1_BASE (LPC_APB0_BASE + 0x10000)
+#define LPC_PWM1_BASE (LPC_APB0_BASE + 0x18000)
+#define LPC_I2C0_BASE (LPC_APB0_BASE + 0x1C000)
+#define LPC_SPI_BASE (LPC_APB0_BASE + 0x20000)
+#define LPC_RTC_BASE (LPC_APB0_BASE + 0x24000)
+#define LPC_GPIOINT_BASE (LPC_APB0_BASE + 0x28080)
+#define LPC_PINCON_BASE (LPC_APB0_BASE + 0x2C000)
+#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x30000)
+#define LPC_ADC_BASE (LPC_APB0_BASE + 0x34000)
+#define LPC_CANAF_RAM_BASE (LPC_APB0_BASE + 0x38000)
+#define LPC_CANAF_BASE (LPC_APB0_BASE + 0x3C000)
+#define LPC_CANCR_BASE (LPC_APB0_BASE + 0x40000)
+#define LPC_CAN1_BASE (LPC_APB0_BASE + 0x44000)
+#define LPC_CAN2_BASE (LPC_APB0_BASE + 0x48000)
+#define LPC_I2C1_BASE (LPC_APB0_BASE + 0x5C000)
+
+/* APB1 peripherals */
+#define LPC_SSP0_BASE (LPC_APB1_BASE + 0x08000)
+#define LPC_DAC_BASE (LPC_APB1_BASE + 0x0C000)
+#define LPC_TIM2_BASE (LPC_APB1_BASE + 0x10000)
+#define LPC_TIM3_BASE (LPC_APB1_BASE + 0x14000)
+#define LPC_UART2_BASE (LPC_APB1_BASE + 0x18000)
+#define LPC_UART3_BASE (LPC_APB1_BASE + 0x1C000)
+#define LPC_I2C2_BASE (LPC_APB1_BASE + 0x20000)
+#define LPC_I2S_BASE (LPC_APB1_BASE + 0x28000)
+#define LPC_RIT_BASE (LPC_APB1_BASE + 0x30000)
+#define LPC_MCPWM_BASE (LPC_APB1_BASE + 0x38000)
+#define LPC_QEI_BASE (LPC_APB1_BASE + 0x3C000)
+#define LPC_SC_BASE (LPC_APB1_BASE + 0x7C000)
+
+/* AHB peripherals */
+#define LPC_EMAC_BASE (LPC_AHB_BASE + 0x00000)
+#define LPC_GPDMA_BASE (LPC_AHB_BASE + 0x04000)
+#define LPC_GPDMACH0_BASE (LPC_AHB_BASE + 0x04100)
+#define LPC_GPDMACH1_BASE (LPC_AHB_BASE + 0x04120)
+#define LPC_GPDMACH2_BASE (LPC_AHB_BASE + 0x04140)
+#define LPC_GPDMACH3_BASE (LPC_AHB_BASE + 0x04160)
+#define LPC_GPDMACH4_BASE (LPC_AHB_BASE + 0x04180)
+#define LPC_GPDMACH5_BASE (LPC_AHB_BASE + 0x041A0)
+#define LPC_GPDMACH6_BASE (LPC_AHB_BASE + 0x041C0)
+#define LPC_GPDMACH7_BASE (LPC_AHB_BASE + 0x041E0)
+#define LPC_USB_BASE (LPC_AHB_BASE + 0x0C000)
+
+/* GPIOs */
+#define LPC_GPIO0_BASE (LPC_GPIO_BASE + 0x00000)
+#define LPC_GPIO1_BASE (LPC_GPIO_BASE + 0x00020)
+#define LPC_GPIO2_BASE (LPC_GPIO_BASE + 0x00040)
+#define LPC_GPIO3_BASE (LPC_GPIO_BASE + 0x00060)
+#define LPC_GPIO4_BASE (LPC_GPIO_BASE + 0x00080)
+
+
+/******************************************************************************/
+/* Peripheral declaration */
+/******************************************************************************/
+#define LPC_SC ((LPC_SC_TypeDef *) LPC_SC_BASE )
+#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
+#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
+#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
+#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
+#define LPC_GPIO4 ((LPC_GPIO_TypeDef *) LPC_GPIO4_BASE )
+#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
+#define LPC_TIM0 ((LPC_TIM_TypeDef *) LPC_TIM0_BASE )
+#define LPC_TIM1 ((LPC_TIM_TypeDef *) LPC_TIM1_BASE )
+#define LPC_TIM2 ((LPC_TIM_TypeDef *) LPC_TIM2_BASE )
+#define LPC_TIM3 ((LPC_TIM_TypeDef *) LPC_TIM3_BASE )
+#define LPC_RIT ((LPC_RIT_TypeDef *) LPC_RIT_BASE )
+#define LPC_UART0 ((LPC_UART0_TypeDef *) LPC_UART0_BASE )
+#define LPC_UART1 ((LPC_UART1_TypeDef *) LPC_UART1_BASE )
+#define LPC_UART2 ((LPC_UART_TypeDef *) LPC_UART2_BASE )
+#define LPC_UART3 ((LPC_UART_TypeDef *) LPC_UART3_BASE )
+#define LPC_PWM1 ((LPC_PWM_TypeDef *) LPC_PWM1_BASE )
+#define LPC_I2C0 ((LPC_I2C_TypeDef *) LPC_I2C0_BASE )
+#define LPC_I2C1 ((LPC_I2C_TypeDef *) LPC_I2C1_BASE )
+#define LPC_I2C2 ((LPC_I2C_TypeDef *) LPC_I2C2_BASE )
+#define LPC_I2S ((LPC_I2S_TypeDef *) LPC_I2S_BASE )
+#define LPC_SPI ((LPC_SPI_TypeDef *) LPC_SPI_BASE )
+#define LPC_RTC ((LPC_RTC_TypeDef *) LPC_RTC_BASE )
+#define LPC_GPIOINT ((LPC_GPIOINT_TypeDef *) LPC_GPIOINT_BASE )
+#define LPC_PINCON ((LPC_PINCON_TypeDef *) LPC_PINCON_BASE )
+#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
+#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
+#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
+#define LPC_DAC ((LPC_DAC_TypeDef *) LPC_DAC_BASE )
+#define LPC_CANAF_RAM ((LPC_CANAF_RAM_TypeDef *) LPC_CANAF_RAM_BASE)
+#define LPC_CANAF ((LPC_CANAF_TypeDef *) LPC_CANAF_BASE )
+#define LPC_CANCR ((LPC_CANCR_TypeDef *) LPC_CANCR_BASE )
+#define LPC_CAN1 ((LPC_CAN_TypeDef *) LPC_CAN1_BASE )
+#define LPC_CAN2 ((LPC_CAN_TypeDef *) LPC_CAN2_BASE )
+#define LPC_MCPWM ((LPC_MCPWM_TypeDef *) LPC_MCPWM_BASE )
+#define LPC_QEI ((LPC_QEI_TypeDef *) LPC_QEI_BASE )
+#define LPC_EMAC ((LPC_EMAC_TypeDef *) LPC_EMAC_BASE )
+#define LPC_GPDMA ((LPC_GPDMA_TypeDef *) LPC_GPDMA_BASE )
+#define LPC_GPDMACH0 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH0_BASE )
+#define LPC_GPDMACH1 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH1_BASE )
+#define LPC_GPDMACH2 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH2_BASE )
+#define LPC_GPDMACH3 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH3_BASE )
+#define LPC_GPDMACH4 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH4_BASE )
+#define LPC_GPDMACH5 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH5_BASE )
+#define LPC_GPDMACH6 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH6_BASE )
+#define LPC_GPDMACH7 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH7_BASE )
+#define LPC_USB ((LPC_USB_TypeDef *) LPC_USB_BASE )
+
+#endif // __LPC17xx_H__
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/lpc17xx.h Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,1035 @@
+/**************************************************************************//**
+ * @file LPC17xx.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File for
+ * NXP LPC17xx Device Series
+ * @version: V1.09
+ * @date: 17. March 2010
+
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef __LPC17xx_H__
+#define __LPC17xx_H__
+
+/*
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** LPC17xx Specific Interrupt Numbers *******************************************************/
+ WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
+ TIMER0_IRQn = 1, /*!< Timer0 Interrupt */
+ TIMER1_IRQn = 2, /*!< Timer1 Interrupt */
+ TIMER2_IRQn = 3, /*!< Timer2 Interrupt */
+ TIMER3_IRQn = 4, /*!< Timer3 Interrupt */
+ UART0_IRQn = 5, /*!< UART0 Interrupt */
+ UART1_IRQn = 6, /*!< UART1 Interrupt */
+ UART2_IRQn = 7, /*!< UART2 Interrupt */
+ UART3_IRQn = 8, /*!< UART3 Interrupt */
+ PWM1_IRQn = 9, /*!< PWM1 Interrupt */
+ I2C0_IRQn = 10, /*!< I2C0 Interrupt */
+ I2C1_IRQn = 11, /*!< I2C1 Interrupt */
+ I2C2_IRQn = 12, /*!< I2C2 Interrupt */
+ SPI_IRQn = 13, /*!< SPI Interrupt */
+ SSP0_IRQn = 14, /*!< SSP0 Interrupt */
+ SSP1_IRQn = 15, /*!< SSP1 Interrupt */
+ PLL0_IRQn = 16, /*!< PLL0 Lock (Main PLL) Interrupt */
+ RTC_IRQn = 17, /*!< Real Time Clock Interrupt */
+ EINT0_IRQn = 18, /*!< External Interrupt 0 Interrupt */
+ EINT1_IRQn = 19, /*!< External Interrupt 1 Interrupt */
+ EINT2_IRQn = 20, /*!< External Interrupt 2 Interrupt */
+ EINT3_IRQn = 21, /*!< External Interrupt 3 Interrupt */
+ ADC_IRQn = 22, /*!< A/D Converter Interrupt */
+ BOD_IRQn = 23, /*!< Brown-Out Detect Interrupt */
+ USB_IRQn = 24, /*!< USB Interrupt */
+ CAN_IRQn = 25, /*!< CAN Interrupt */
+ DMA_IRQn = 26, /*!< General Purpose DMA Interrupt */
+ I2S_IRQn = 27, /*!< I2S Interrupt */
+ ENET_IRQn = 28, /*!< Ethernet Interrupt */
+ RIT_IRQn = 29, /*!< Repetitive Interrupt Timer Interrupt */
+ MCPWM_IRQn = 30, /*!< Motor Control PWM Interrupt */
+ QEI_IRQn = 31, /*!< Quadrature Encoder Interface Interrupt */
+ PLL1_IRQn = 32, /*!< PLL1 Lock (USB PLL) Interrupt */
+ USBActivity_IRQn = 33, /* USB Activity interrupt */
+ CANActivity_IRQn = 34, /* CAN Activity interrupt */
+} IRQn_Type;
+
+
+/*
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/* Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+
+#include "core_cm3.h" /* Cortex-M3 processor and core peripherals */
+#include "system_LPC17xx.h" /* System Header */
+
+
+/******************************************************************************/
+/* Device Specific Peripheral registers structures */
+/******************************************************************************/
+
+#if defined ( __CC_ARM )
+#pragma anon_unions
+#endif
+
+/*------------- System Control (SC) ------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t FLASHCFG; /* Flash Accelerator Module */
+ uint32_t RESERVED0[31];
+ __IO uint32_t PLL0CON; /* Clocking and Power Control */
+ __IO uint32_t PLL0CFG;
+ __I uint32_t PLL0STAT;
+ __O uint32_t PLL0FEED;
+ uint32_t RESERVED1[4];
+ __IO uint32_t PLL1CON;
+ __IO uint32_t PLL1CFG;
+ __I uint32_t PLL1STAT;
+ __O uint32_t PLL1FEED;
+ uint32_t RESERVED2[4];
+ __IO uint32_t PCON;
+ __IO uint32_t PCONP;
+ uint32_t RESERVED3[15];
+ __IO uint32_t CCLKCFG;
+ __IO uint32_t USBCLKCFG;
+ __IO uint32_t CLKSRCSEL;
+ __IO uint32_t CANSLEEPCLR;
+ __IO uint32_t CANWAKEFLAGS;
+ uint32_t RESERVED4[10];
+ __IO uint32_t EXTINT; /* External Interrupts */
+ uint32_t RESERVED5;
+ __IO uint32_t EXTMODE;
+ __IO uint32_t EXTPOLAR;
+ uint32_t RESERVED6[12];
+ __IO uint32_t RSID; /* Reset */
+ uint32_t RESERVED7[7];
+ __IO uint32_t SCS; /* Syscon Miscellaneous Registers */
+ __IO uint32_t IRCTRIM; /* Clock Dividers */
+ __IO uint32_t PCLKSEL0;
+ __IO uint32_t PCLKSEL1;
+ uint32_t RESERVED8[4];
+ __IO uint32_t USBIntSt; /* USB Device/OTG Interrupt Register */
+ __IO uint32_t DMAREQSEL;
+ __IO uint32_t CLKOUTCFG; /* Clock Output Configuration */
+ } LPC_SC_TypeDef;
+
+/*------------- Pin Connect Block (PINCON) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t PINSEL0;
+ __IO uint32_t PINSEL1;
+ __IO uint32_t PINSEL2;
+ __IO uint32_t PINSEL3;
+ __IO uint32_t PINSEL4;
+ __IO uint32_t PINSEL5;
+ __IO uint32_t PINSEL6;
+ __IO uint32_t PINSEL7;
+ __IO uint32_t PINSEL8;
+ __IO uint32_t PINSEL9;
+ __IO uint32_t PINSEL10;
+ uint32_t RESERVED0[5];
+ __IO uint32_t PINMODE0;
+ __IO uint32_t PINMODE1;
+ __IO uint32_t PINMODE2;
+ __IO uint32_t PINMODE3;
+ __IO uint32_t PINMODE4;
+ __IO uint32_t PINMODE5;
+ __IO uint32_t PINMODE6;
+ __IO uint32_t PINMODE7;
+ __IO uint32_t PINMODE8;
+ __IO uint32_t PINMODE9;
+ __IO uint32_t PINMODE_OD0;
+ __IO uint32_t PINMODE_OD1;
+ __IO uint32_t PINMODE_OD2;
+ __IO uint32_t PINMODE_OD3;
+ __IO uint32_t PINMODE_OD4;
+ __IO uint32_t I2CPADCFG;
+} LPC_PINCON_TypeDef;
+
+/*------------- General Purpose Input/Output (GPIO) --------------------------*/
+typedef struct
+{
+ union {
+ __IO uint32_t FIODIR;
+ struct {
+ __IO uint16_t FIODIRL;
+ __IO uint16_t FIODIRH;
+ };
+ struct {
+ __IO uint8_t FIODIR0;
+ __IO uint8_t FIODIR1;
+ __IO uint8_t FIODIR2;
+ __IO uint8_t FIODIR3;
+ };
+ };
+ uint32_t RESERVED0[3];
+ union {
+ __IO uint32_t FIOMASK;
+ struct {
+ __IO uint16_t FIOMASKL;
+ __IO uint16_t FIOMASKH;
+ };
+ struct {
+ __IO uint8_t FIOMASK0;
+ __IO uint8_t FIOMASK1;
+ __IO uint8_t FIOMASK2;
+ __IO uint8_t FIOMASK3;
+ };
+ };
+ union {
+ __IO uint32_t FIOPIN;
+ struct {
+ __IO uint16_t FIOPINL;
+ __IO uint16_t FIOPINH;
+ };
+ struct {
+ __IO uint8_t FIOPIN0;
+ __IO uint8_t FIOPIN1;
+ __IO uint8_t FIOPIN2;
+ __IO uint8_t FIOPIN3;
+ };
+ };
+ union {
+ __IO uint32_t FIOSET;
+ struct {
+ __IO uint16_t FIOSETL;
+ __IO uint16_t FIOSETH;
+ };
+ struct {
+ __IO uint8_t FIOSET0;
+ __IO uint8_t FIOSET1;
+ __IO uint8_t FIOSET2;
+ __IO uint8_t FIOSET3;
+ };
+ };
+ union {
+ __O uint32_t FIOCLR;
+ struct {
+ __O uint16_t FIOCLRL;
+ __O uint16_t FIOCLRH;
+ };
+ struct {
+ __O uint8_t FIOCLR0;
+ __O uint8_t FIOCLR1;
+ __O uint8_t FIOCLR2;
+ __O uint8_t FIOCLR3;
+ };
+ };
+} LPC_GPIO_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IntStatus;
+ __I uint32_t IO0IntStatR;
+ __I uint32_t IO0IntStatF;
+ __O uint32_t IO0IntClr;
+ __IO uint32_t IO0IntEnR;
+ __IO uint32_t IO0IntEnF;
+ uint32_t RESERVED0[3];
+ __I uint32_t IO2IntStatR;
+ __I uint32_t IO2IntStatF;
+ __O uint32_t IO2IntClr;
+ __IO uint32_t IO2IntEnR;
+ __IO uint32_t IO2IntEnF;
+} LPC_GPIOINT_TypeDef;
+
+/*------------- Timer (TIM) --------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ uint32_t RESERVED0[2];
+ __IO uint32_t EMR;
+ uint32_t RESERVED1[12];
+ __IO uint32_t CTCR;
+} LPC_TIM_TypeDef;
+
+/*------------- Pulse-Width Modulation (PWM) ---------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ __I uint32_t CR2;
+ __I uint32_t CR3;
+ uint32_t RESERVED0;
+ __IO uint32_t MR4;
+ __IO uint32_t MR5;
+ __IO uint32_t MR6;
+ __IO uint32_t PCR;
+ __IO uint32_t LER;
+ uint32_t RESERVED1[7];
+ __IO uint32_t CTCR;
+} LPC_PWM_TypeDef;
+
+/*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __IO uint32_t FIFOLVL;
+} LPC_UART_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __IO uint32_t FIFOLVL;
+} LPC_UART0_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t MCR;
+ uint8_t RESERVED2[3];
+ __I uint8_t LSR;
+ uint8_t RESERVED3[3];
+ __I uint8_t MSR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t SCR;
+ uint8_t RESERVED5[3];
+ __IO uint32_t ACR;
+ uint32_t RESERVED6;
+ __IO uint32_t FDR;
+ uint32_t RESERVED7;
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];
+ __IO uint32_t FIFOLVL;
+} LPC_UART1_TypeDef;
+
+/*------------- Serial Peripheral Interface (SPI) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t SPCR;
+ __I uint32_t SPSR;
+ __IO uint32_t SPDR;
+ __IO uint32_t SPCCR;
+ uint32_t RESERVED0[3];
+ __IO uint32_t SPINT;
+} LPC_SPI_TypeDef;
+
+/*------------- Synchronous Serial Communication (SSP) -----------------------*/
+typedef struct
+{
+ __IO uint32_t CR0;
+ __IO uint32_t CR1;
+ __IO uint32_t DR;
+ __I uint32_t SR;
+ __IO uint32_t CPSR;
+ __IO uint32_t IMSC;
+ __IO uint32_t RIS;
+ __IO uint32_t MIS;
+ __IO uint32_t ICR;
+ __IO uint32_t DMACR;
+} LPC_SSP_TypeDef;
+
+/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2CONSET;
+ __I uint32_t I2STAT;
+ __IO uint32_t I2DAT;
+ __IO uint32_t I2ADR0;
+ __IO uint32_t I2SCLH;
+ __IO uint32_t I2SCLL;
+ __O uint32_t I2CONCLR;
+ __IO uint32_t MMCTRL;
+ __IO uint32_t I2ADR1;
+ __IO uint32_t I2ADR2;
+ __IO uint32_t I2ADR3;
+ __I uint32_t I2DATA_BUFFER;
+ __IO uint32_t I2MASK0;
+ __IO uint32_t I2MASK1;
+ __IO uint32_t I2MASK2;
+ __IO uint32_t I2MASK3;
+} LPC_I2C_TypeDef;
+
+/*------------- Inter IC Sound (I2S) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2SDAO;
+ __IO uint32_t I2SDAI;
+ __O uint32_t I2STXFIFO;
+ __I uint32_t I2SRXFIFO;
+ __I uint32_t I2SSTATE;
+ __IO uint32_t I2SDMA1;
+ __IO uint32_t I2SDMA2;
+ __IO uint32_t I2SIRQ;
+ __IO uint32_t I2STXRATE;
+ __IO uint32_t I2SRXRATE;
+ __IO uint32_t I2STXBITRATE;
+ __IO uint32_t I2SRXBITRATE;
+ __IO uint32_t I2STXMODE;
+ __IO uint32_t I2SRXMODE;
+} LPC_I2S_TypeDef;
+
+/*------------- Repetitive Interrupt Timer (RIT) -----------------------------*/
+typedef struct
+{
+ __IO uint32_t RICOMPVAL;
+ __IO uint32_t RIMASK;
+ __IO uint8_t RICTRL;
+ uint8_t RESERVED0[3];
+ __IO uint32_t RICOUNTER;
+} LPC_RIT_TypeDef;
+
+/*------------- Real-Time Clock (RTC) ----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t ILR;
+ uint8_t RESERVED0[7];
+ __IO uint8_t CCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t CIIR;
+ uint8_t RESERVED2[3];
+ __IO uint8_t AMR;
+ uint8_t RESERVED3[3];
+ __I uint32_t CTIME0;
+ __I uint32_t CTIME1;
+ __I uint32_t CTIME2;
+ __IO uint8_t SEC;
+ uint8_t RESERVED4[3];
+ __IO uint8_t MIN;
+ uint8_t RESERVED5[3];
+ __IO uint8_t HOUR;
+ uint8_t RESERVED6[3];
+ __IO uint8_t DOM;
+ uint8_t RESERVED7[3];
+ __IO uint8_t DOW;
+ uint8_t RESERVED8[3];
+ __IO uint16_t DOY;
+ uint16_t RESERVED9;
+ __IO uint8_t MONTH;
+ uint8_t RESERVED10[3];
+ __IO uint16_t YEAR;
+ uint16_t RESERVED11;
+ __IO uint32_t CALIBRATION;
+ __IO uint32_t GPREG0;
+ __IO uint32_t GPREG1;
+ __IO uint32_t GPREG2;
+ __IO uint32_t GPREG3;
+ __IO uint32_t GPREG4;
+ __IO uint8_t RTC_AUXEN;
+ uint8_t RESERVED12[3];
+ __IO uint8_t RTC_AUX;
+ uint8_t RESERVED13[3];
+ __IO uint8_t ALSEC;
+ uint8_t RESERVED14[3];
+ __IO uint8_t ALMIN;
+ uint8_t RESERVED15[3];
+ __IO uint8_t ALHOUR;
+ uint8_t RESERVED16[3];
+ __IO uint8_t ALDOM;
+ uint8_t RESERVED17[3];
+ __IO uint8_t ALDOW;
+ uint8_t RESERVED18[3];
+ __IO uint16_t ALDOY;
+ uint16_t RESERVED19;
+ __IO uint8_t ALMON;
+ uint8_t RESERVED20[3];
+ __IO uint16_t ALYEAR;
+ uint16_t RESERVED21;
+} LPC_RTC_TypeDef;
+
+/*------------- Watchdog Timer (WDT) -----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t WDMOD;
+ uint8_t RESERVED0[3];
+ __IO uint32_t WDTC;
+ __O uint8_t WDFEED;
+ uint8_t RESERVED1[3];
+ __I uint32_t WDTV;
+ __IO uint32_t WDCLKSEL;
+} LPC_WDT_TypeDef;
+
+/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t ADCR;
+ __IO uint32_t ADGDR;
+ uint32_t RESERVED0;
+ __IO uint32_t ADINTEN;
+ __I uint32_t ADDR0;
+ __I uint32_t ADDR1;
+ __I uint32_t ADDR2;
+ __I uint32_t ADDR3;
+ __I uint32_t ADDR4;
+ __I uint32_t ADDR5;
+ __I uint32_t ADDR6;
+ __I uint32_t ADDR7;
+ __I uint32_t ADSTAT;
+ __IO uint32_t ADTRM;
+} LPC_ADC_TypeDef;
+
+/*------------- Digital-to-Analog Converter (DAC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t DACR;
+ __IO uint32_t DACCTRL;
+ __IO uint16_t DACCNTVAL;
+} LPC_DAC_TypeDef;
+
+/*------------- Motor Control Pulse-Width Modulation (MCPWM) -----------------*/
+typedef struct
+{
+ __I uint32_t MCCON;
+ __O uint32_t MCCON_SET;
+ __O uint32_t MCCON_CLR;
+ __I uint32_t MCCAPCON;
+ __O uint32_t MCCAPCON_SET;
+ __O uint32_t MCCAPCON_CLR;
+ __IO uint32_t MCTIM0;
+ __IO uint32_t MCTIM1;
+ __IO uint32_t MCTIM2;
+ __IO uint32_t MCPER0;
+ __IO uint32_t MCPER1;
+ __IO uint32_t MCPER2;
+ __IO uint32_t MCPW0;
+ __IO uint32_t MCPW1;
+ __IO uint32_t MCPW2;
+ __IO uint32_t MCDEADTIME;
+ __IO uint32_t MCCCP;
+ __IO uint32_t MCCR0;
+ __IO uint32_t MCCR1;
+ __IO uint32_t MCCR2;
+ __I uint32_t MCINTEN;
+ __O uint32_t MCINTEN_SET;
+ __O uint32_t MCINTEN_CLR;
+ __I uint32_t MCCNTCON;
+ __O uint32_t MCCNTCON_SET;
+ __O uint32_t MCCNTCON_CLR;
+ __I uint32_t MCINTFLAG;
+ __O uint32_t MCINTFLAG_SET;
+ __O uint32_t MCINTFLAG_CLR;
+ __O uint32_t MCCAP_CLR;
+} LPC_MCPWM_TypeDef;
+
+/*------------- Quadrature Encoder Interface (QEI) ---------------------------*/
+typedef struct
+{
+ __O uint32_t QEICON;
+ __I uint32_t QEISTAT;
+ __IO uint32_t QEICONF;
+ __I uint32_t QEIPOS;
+ __IO uint32_t QEIMAXPOS;
+ __IO uint32_t CMPOS0;
+ __IO uint32_t CMPOS1;
+ __IO uint32_t CMPOS2;
+ __I uint32_t INXCNT;
+ __IO uint32_t INXCMP;
+ __IO uint32_t QEILOAD;
+ __I uint32_t QEITIME;
+ __I uint32_t QEIVEL;
+ __I uint32_t QEICAP;
+ __IO uint32_t VELCOMP;
+ __IO uint32_t FILTER;
+ uint32_t RESERVED0[998];
+ __O uint32_t QEIIEC;
+ __O uint32_t QEIIES;
+ __I uint32_t QEIINTSTAT;
+ __I uint32_t QEIIE;
+ __O uint32_t QEICLR;
+ __O uint32_t QEISET;
+} LPC_QEI_TypeDef;
+
+/*------------- Controller Area Network (CAN) --------------------------------*/
+typedef struct
+{
+ __IO uint32_t mask[512]; /* ID Masks */
+} LPC_CANAF_RAM_TypeDef;
+
+typedef struct /* Acceptance Filter Registers */
+{
+ __IO uint32_t AFMR;
+ __IO uint32_t SFF_sa;
+ __IO uint32_t SFF_GRP_sa;
+ __IO uint32_t EFF_sa;
+ __IO uint32_t EFF_GRP_sa;
+ __IO uint32_t ENDofTable;
+ __I uint32_t LUTerrAd;
+ __I uint32_t LUTerr;
+ __IO uint32_t FCANIE;
+ __IO uint32_t FCANIC0;
+ __IO uint32_t FCANIC1;
+} LPC_CANAF_TypeDef;
+
+typedef struct /* Central Registers */
+{
+ __I uint32_t CANTxSR;
+ __I uint32_t CANRxSR;
+ __I uint32_t CANMSR;
+} LPC_CANCR_TypeDef;
+
+typedef struct /* Controller Registers */
+{
+ __IO uint32_t MOD;
+ __O uint32_t CMR;
+ __IO uint32_t GSR;
+ __I uint32_t ICR;
+ __IO uint32_t IER;
+ __IO uint32_t BTR;
+ __IO uint32_t EWL;
+ __I uint32_t SR;
+ __IO uint32_t RFS;
+ __IO uint32_t RID;
+ __IO uint32_t RDA;
+ __IO uint32_t RDB;
+ __IO uint32_t TFI1;
+ __IO uint32_t TID1;
+ __IO uint32_t TDA1;
+ __IO uint32_t TDB1;
+ __IO uint32_t TFI2;
+ __IO uint32_t TID2;
+ __IO uint32_t TDA2;
+ __IO uint32_t TDB2;
+ __IO uint32_t TFI3;
+ __IO uint32_t TID3;
+ __IO uint32_t TDA3;
+ __IO uint32_t TDB3;
+} LPC_CAN_TypeDef;
+
+/*------------- General Purpose Direct Memory Access (GPDMA) -----------------*/
+typedef struct /* Common Registers */
+{
+ __I uint32_t DMACIntStat;
+ __I uint32_t DMACIntTCStat;
+ __O uint32_t DMACIntTCClear;
+ __I uint32_t DMACIntErrStat;
+ __O uint32_t DMACIntErrClr;
+ __I uint32_t DMACRawIntTCStat;
+ __I uint32_t DMACRawIntErrStat;
+ __I uint32_t DMACEnbldChns;
+ __IO uint32_t DMACSoftBReq;
+ __IO uint32_t DMACSoftSReq;
+ __IO uint32_t DMACSoftLBReq;
+ __IO uint32_t DMACSoftLSReq;
+ __IO uint32_t DMACConfig;
+ __IO uint32_t DMACSync;
+} LPC_GPDMA_TypeDef;
+
+typedef struct /* Channel Registers */
+{
+ __IO uint32_t DMACCSrcAddr;
+ __IO uint32_t DMACCDestAddr;
+ __IO uint32_t DMACCLLI;
+ __IO uint32_t DMACCControl;
+ __IO uint32_t DMACCConfig;
+} LPC_GPDMACH_TypeDef;
+
+/*------------- Universal Serial Bus (USB) -----------------------------------*/
+typedef struct
+{
+ __I uint32_t HcRevision; /* USB Host Registers */
+ __IO uint32_t HcControl;
+ __IO uint32_t HcCommandStatus;
+ __IO uint32_t HcInterruptStatus;
+ __IO uint32_t HcInterruptEnable;
+ __IO uint32_t HcInterruptDisable;
+ __IO uint32_t HcHCCA;
+ __I uint32_t HcPeriodCurrentED;
+ __IO uint32_t HcControlHeadED;
+ __IO uint32_t HcControlCurrentED;
+ __IO uint32_t HcBulkHeadED;
+ __IO uint32_t HcBulkCurrentED;
+ __I uint32_t HcDoneHead;
+ __IO uint32_t HcFmInterval;
+ __I uint32_t HcFmRemaining;
+ __I uint32_t HcFmNumber;
+ __IO uint32_t HcPeriodicStart;
+ __IO uint32_t HcLSTreshold;
+ __IO uint32_t HcRhDescriptorA;
+ __IO uint32_t HcRhDescriptorB;
+ __IO uint32_t HcRhStatus;
+ __IO uint32_t HcRhPortStatus1;
+ __IO uint32_t HcRhPortStatus2;
+ uint32_t RESERVED0[40];
+ __I uint32_t Module_ID;
+
+ __I uint32_t OTGIntSt; /* USB On-The-Go Registers */
+ __IO uint32_t OTGIntEn;
+ __O uint32_t OTGIntSet;
+ __O uint32_t OTGIntClr;
+ __IO uint32_t OTGStCtrl;
+ __IO uint32_t OTGTmr;
+ uint32_t RESERVED1[58];
+
+ __I uint32_t USBDevIntSt; /* USB Device Interrupt Registers */
+ __IO uint32_t USBDevIntEn;
+ __O uint32_t USBDevIntClr;
+ __O uint32_t USBDevIntSet;
+
+ __O uint32_t USBCmdCode; /* USB Device SIE Command Registers */
+ __I uint32_t USBCmdData;
+
+ __I uint32_t USBRxData; /* USB Device Transfer Registers */
+ __O uint32_t USBTxData;
+ __I uint32_t USBRxPLen;
+ __O uint32_t USBTxPLen;
+ __IO uint32_t USBCtrl;
+ __O uint32_t USBDevIntPri;
+
+ __I uint32_t USBEpIntSt; /* USB Device Endpoint Interrupt Regs */
+ __IO uint32_t USBEpIntEn;
+ __O uint32_t USBEpIntClr;
+ __O uint32_t USBEpIntSet;
+ __O uint32_t USBEpIntPri;
+
+ __IO uint32_t USBReEp; /* USB Device Endpoint Realization Reg*/
+ __O uint32_t USBEpInd;
+ __IO uint32_t USBMaxPSize;
+
+ __I uint32_t USBDMARSt; /* USB Device DMA Registers */
+ __O uint32_t USBDMARClr;
+ __O uint32_t USBDMARSet;
+ uint32_t RESERVED2[9];
+ __IO uint32_t USBUDCAH;
+ __I uint32_t USBEpDMASt;
+ __O uint32_t USBEpDMAEn;
+ __O uint32_t USBEpDMADis;
+ __I uint32_t USBDMAIntSt;
+ __IO uint32_t USBDMAIntEn;
+ uint32_t RESERVED3[2];
+ __I uint32_t USBEoTIntSt;
+ __O uint32_t USBEoTIntClr;
+ __O uint32_t USBEoTIntSet;
+ __I uint32_t USBNDDRIntSt;
+ __O uint32_t USBNDDRIntClr;
+ __O uint32_t USBNDDRIntSet;
+ __I uint32_t USBSysErrIntSt;
+ __O uint32_t USBSysErrIntClr;
+ __O uint32_t USBSysErrIntSet;
+ uint32_t RESERVED4[15];
+
+ union {
+ __I uint32_t I2C_RX; /* USB OTG I2C Registers */
+ __O uint32_t I2C_TX;
+ };
+ __I uint32_t I2C_STS;
+ __IO uint32_t I2C_CTL;
+ __IO uint32_t I2C_CLKHI;
+ __O uint32_t I2C_CLKLO;
+ uint32_t RESERVED5[824];
+
+ union {
+ __IO uint32_t USBClkCtrl; /* USB Clock Control Registers */
+ __IO uint32_t OTGClkCtrl;
+ };
+ union {
+ __I uint32_t USBClkSt;
+ __I uint32_t OTGClkSt;
+ };
+} LPC_USB_TypeDef;
+
+/*------------- Ethernet Media Access Controller (EMAC) ----------------------*/
+typedef struct
+{
+ __IO uint32_t MAC1; /* MAC Registers */
+ __IO uint32_t MAC2;
+ __IO uint32_t IPGT;
+ __IO uint32_t IPGR;
+ __IO uint32_t CLRT;
+ __IO uint32_t MAXF;
+ __IO uint32_t SUPP;
+ __IO uint32_t TEST;
+ __IO uint32_t MCFG;
+ __IO uint32_t MCMD;
+ __IO uint32_t MADR;
+ __O uint32_t MWTD;
+ __I uint32_t MRDD;
+ __I uint32_t MIND;
+ uint32_t RESERVED0[2];
+ __IO uint32_t SA0;
+ __IO uint32_t SA1;
+ __IO uint32_t SA2;
+ uint32_t RESERVED1[45];
+ __IO uint32_t Command; /* Control Registers */
+ __I uint32_t Status;
+ __IO uint32_t RxDescriptor;
+ __IO uint32_t RxStatus;
+ __IO uint32_t RxDescriptorNumber;
+ __I uint32_t RxProduceIndex;
+ __IO uint32_t RxConsumeIndex;
+ __IO uint32_t TxDescriptor;
+ __IO uint32_t TxStatus;
+ __IO uint32_t TxDescriptorNumber;
+ __IO uint32_t TxProduceIndex;
+ __I uint32_t TxConsumeIndex;
+ uint32_t RESERVED2[10];
+ __I uint32_t TSV0;
+ __I uint32_t TSV1;
+ __I uint32_t RSV;
+ uint32_t RESERVED3[3];
+ __IO uint32_t FlowControlCounter;
+ __I uint32_t FlowControlStatus;
+ uint32_t RESERVED4[34];
+ __IO uint32_t RxFilterCtrl; /* Rx Filter Registers */
+ __IO uint32_t RxFilterWoLStatus;
+ __IO uint32_t RxFilterWoLClear;
+ uint32_t RESERVED5;
+ __IO uint32_t HashFilterL;
+ __IO uint32_t HashFilterH;
+ uint32_t RESERVED6[882];
+ __I uint32_t IntStatus; /* Module Control Registers */
+ __IO uint32_t IntEnable;
+ __O uint32_t IntClear;
+ __O uint32_t IntSet;
+ uint32_t RESERVED7;
+ __IO uint32_t PowerDown;
+ uint32_t RESERVED8;
+ __IO uint32_t Module_ID;
+} LPC_EMAC_TypeDef;
+
+#if defined ( __CC_ARM )
+#pragma no_anon_unions
+#endif
+
+
+/******************************************************************************/
+/* Peripheral memory map */
+/******************************************************************************/
+/* Base addresses */
+#define LPC_FLASH_BASE (0x00000000UL)
+#define LPC_RAM_BASE (0x10000000UL)
+#define LPC_GPIO_BASE (0x2009C000UL)
+#define LPC_APB0_BASE (0x40000000UL)
+#define LPC_APB1_BASE (0x40080000UL)
+#define LPC_AHB_BASE (0x50000000UL)
+#define LPC_CM3_BASE (0xE0000000UL)
+
+/* APB0 peripherals */
+#define LPC_WDT_BASE (LPC_APB0_BASE + 0x00000)
+#define LPC_TIM0_BASE (LPC_APB0_BASE + 0x04000)
+#define LPC_TIM1_BASE (LPC_APB0_BASE + 0x08000)
+#define LPC_UART0_BASE (LPC_APB0_BASE + 0x0C000)
+#define LPC_UART1_BASE (LPC_APB0_BASE + 0x10000)
+#define LPC_PWM1_BASE (LPC_APB0_BASE + 0x18000)
+#define LPC_I2C0_BASE (LPC_APB0_BASE + 0x1C000)
+#define LPC_SPI_BASE (LPC_APB0_BASE + 0x20000)
+#define LPC_RTC_BASE (LPC_APB0_BASE + 0x24000)
+#define LPC_GPIOINT_BASE (LPC_APB0_BASE + 0x28080)
+#define LPC_PINCON_BASE (LPC_APB0_BASE + 0x2C000)
+#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x30000)
+#define LPC_ADC_BASE (LPC_APB0_BASE + 0x34000)
+#define LPC_CANAF_RAM_BASE (LPC_APB0_BASE + 0x38000)
+#define LPC_CANAF_BASE (LPC_APB0_BASE + 0x3C000)
+#define LPC_CANCR_BASE (LPC_APB0_BASE + 0x40000)
+#define LPC_CAN1_BASE (LPC_APB0_BASE + 0x44000)
+#define LPC_CAN2_BASE (LPC_APB0_BASE + 0x48000)
+#define LPC_I2C1_BASE (LPC_APB0_BASE + 0x5C000)
+
+/* APB1 peripherals */
+#define LPC_SSP0_BASE (LPC_APB1_BASE + 0x08000)
+#define LPC_DAC_BASE (LPC_APB1_BASE + 0x0C000)
+#define LPC_TIM2_BASE (LPC_APB1_BASE + 0x10000)
+#define LPC_TIM3_BASE (LPC_APB1_BASE + 0x14000)
+#define LPC_UART2_BASE (LPC_APB1_BASE + 0x18000)
+#define LPC_UART3_BASE (LPC_APB1_BASE + 0x1C000)
+#define LPC_I2C2_BASE (LPC_APB1_BASE + 0x20000)
+#define LPC_I2S_BASE (LPC_APB1_BASE + 0x28000)
+#define LPC_RIT_BASE (LPC_APB1_BASE + 0x30000)
+#define LPC_MCPWM_BASE (LPC_APB1_BASE + 0x38000)
+#define LPC_QEI_BASE (LPC_APB1_BASE + 0x3C000)
+#define LPC_SC_BASE (LPC_APB1_BASE + 0x7C000)
+
+/* AHB peripherals */
+#define LPC_EMAC_BASE (LPC_AHB_BASE + 0x00000)
+#define LPC_GPDMA_BASE (LPC_AHB_BASE + 0x04000)
+#define LPC_GPDMACH0_BASE (LPC_AHB_BASE + 0x04100)
+#define LPC_GPDMACH1_BASE (LPC_AHB_BASE + 0x04120)
+#define LPC_GPDMACH2_BASE (LPC_AHB_BASE + 0x04140)
+#define LPC_GPDMACH3_BASE (LPC_AHB_BASE + 0x04160)
+#define LPC_GPDMACH4_BASE (LPC_AHB_BASE + 0x04180)
+#define LPC_GPDMACH5_BASE (LPC_AHB_BASE + 0x041A0)
+#define LPC_GPDMACH6_BASE (LPC_AHB_BASE + 0x041C0)
+#define LPC_GPDMACH7_BASE (LPC_AHB_BASE + 0x041E0)
+#define LPC_USB_BASE (LPC_AHB_BASE + 0x0C000)
+
+/* GPIOs */
+#define LPC_GPIO0_BASE (LPC_GPIO_BASE + 0x00000)
+#define LPC_GPIO1_BASE (LPC_GPIO_BASE + 0x00020)
+#define LPC_GPIO2_BASE (LPC_GPIO_BASE + 0x00040)
+#define LPC_GPIO3_BASE (LPC_GPIO_BASE + 0x00060)
+#define LPC_GPIO4_BASE (LPC_GPIO_BASE + 0x00080)
+
+
+/******************************************************************************/
+/* Peripheral declaration */
+/******************************************************************************/
+#define LPC_SC ((LPC_SC_TypeDef *) LPC_SC_BASE )
+#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
+#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
+#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
+#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
+#define LPC_GPIO4 ((LPC_GPIO_TypeDef *) LPC_GPIO4_BASE )
+#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
+#define LPC_TIM0 ((LPC_TIM_TypeDef *) LPC_TIM0_BASE )
+#define LPC_TIM1 ((LPC_TIM_TypeDef *) LPC_TIM1_BASE )
+#define LPC_TIM2 ((LPC_TIM_TypeDef *) LPC_TIM2_BASE )
+#define LPC_TIM3 ((LPC_TIM_TypeDef *) LPC_TIM3_BASE )
+#define LPC_RIT ((LPC_RIT_TypeDef *) LPC_RIT_BASE )
+#define LPC_UART0 ((LPC_UART0_TypeDef *) LPC_UART0_BASE )
+#define LPC_UART1 ((LPC_UART1_TypeDef *) LPC_UART1_BASE )
+#define LPC_UART2 ((LPC_UART_TypeDef *) LPC_UART2_BASE )
+#define LPC_UART3 ((LPC_UART_TypeDef *) LPC_UART3_BASE )
+#define LPC_PWM1 ((LPC_PWM_TypeDef *) LPC_PWM1_BASE )
+#define LPC_I2C0 ((LPC_I2C_TypeDef *) LPC_I2C0_BASE )
+#define LPC_I2C1 ((LPC_I2C_TypeDef *) LPC_I2C1_BASE )
+#define LPC_I2C2 ((LPC_I2C_TypeDef *) LPC_I2C2_BASE )
+#define LPC_I2S ((LPC_I2S_TypeDef *) LPC_I2S_BASE )
+#define LPC_SPI ((LPC_SPI_TypeDef *) LPC_SPI_BASE )
+#define LPC_RTC ((LPC_RTC_TypeDef *) LPC_RTC_BASE )
+#define LPC_GPIOINT ((LPC_GPIOINT_TypeDef *) LPC_GPIOINT_BASE )
+#define LPC_PINCON ((LPC_PINCON_TypeDef *) LPC_PINCON_BASE )
+#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
+#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
+#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
+#define LPC_DAC ((LPC_DAC_TypeDef *) LPC_DAC_BASE )
+#define LPC_CANAF_RAM ((LPC_CANAF_RAM_TypeDef *) LPC_CANAF_RAM_BASE)
+#define LPC_CANAF ((LPC_CANAF_TypeDef *) LPC_CANAF_BASE )
+#define LPC_CANCR ((LPC_CANCR_TypeDef *) LPC_CANCR_BASE )
+#define LPC_CAN1 ((LPC_CAN_TypeDef *) LPC_CAN1_BASE )
+#define LPC_CAN2 ((LPC_CAN_TypeDef *) LPC_CAN2_BASE )
+#define LPC_MCPWM ((LPC_MCPWM_TypeDef *) LPC_MCPWM_BASE )
+#define LPC_QEI ((LPC_QEI_TypeDef *) LPC_QEI_BASE )
+#define LPC_EMAC ((LPC_EMAC_TypeDef *) LPC_EMAC_BASE )
+#define LPC_GPDMA ((LPC_GPDMA_TypeDef *) LPC_GPDMA_BASE )
+#define LPC_GPDMACH0 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH0_BASE )
+#define LPC_GPDMACH1 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH1_BASE )
+#define LPC_GPDMACH2 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH2_BASE )
+#define LPC_GPDMACH3 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH3_BASE )
+#define LPC_GPDMACH4 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH4_BASE )
+#define LPC_GPDMACH5 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH5_BASE )
+#define LPC_GPDMACH6 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH6_BASE )
+#define LPC_GPDMACH7 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH7_BASE )
+#define LPC_USB ((LPC_USB_TypeDef *) LPC_USB_BASE )
+
+#endif // __LPC17xx_H__
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/lpc17xx_clkpwr.h Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,386 @@
+/***********************************************************************//**
+ * @file : lpc17xx_clkpwr.h
+ * @brief : Contains all macro definitions and function prototypes
+ * support for Clock and Power Control firmware library on LPC17xx
+ * @version : 1.0
+ * @date : 18. Mar. 2009
+ * @author : HieuNguyen
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **************************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @defgroup CLKPWR
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+#ifndef LPC17XX_CLKPWR_H_
+#define LPC17XX_CLKPWR_H_
+
+/* Includes ------------------------------------------------------------------- */
+#include "lpc17xx.h"
+#include "lpc_types.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+/* Private Macros ------------------------------------------------------------- */
+/** @defgroup CLKPWR_Private_Macros
+ * @{
+ */
+
+/** @defgroup CLKPPWR_REGISTER_BIT_DEFINITIONS
+ * @{
+ */
+
+/* Clock source selection multiplexer definition */
+/** Internal RC oscillator */
+#define CLKPWR_CLKSRCSEL_CLKSRC_IRC ((uint32_t)(0x00))
+/** Main oscillator */
+#define CLKPWR_CLKSRCSEL_CLKSRC_MAINOSC ((uint32_t)(0x01))
+/** RTC oscillator */
+#define CLKPWR_CLKSRCSEL_CLKSRC_RTC ((uint32_t)(0x02))
+/** Clock source selection bit mask */
+#define CLKPWR_CLKSRCSEL_BITMASK ((uint32_t)(0x03))
+
+
+/* Clock Output Configuration register definition */
+/** Selects the CPU clock as the CLKOUT source */
+#define CLKPWR_CLKOUTCFG_CLKOUTSEL_CPU ((uint32_t)(0x00))
+/** Selects the main oscillator as the CLKOUT source */
+#define CLKPWR_CLKOUTCFG_CLKOUTSEL_MAINOSC ((uint32_t)(0x01))
+/** Selects the Internal RC oscillator as the CLKOUT source */
+#define CLKPWR_CLKOUTCFG_CLKOUTSEL_RC ((uint32_t)(0x02))
+/** Selects the USB clock as the CLKOUT source */
+#define CLKPWR_CLKOUTCFG_CLKOUTSEL_USB ((uint32_t)(0x03))
+/** Selects the RTC oscillator as the CLKOUT source */
+#define CLKPWR_CLKOUTCFG_CLKOUTSEL_RTC ((uint32_t)(0x04))
+/** Integer value to divide the output clock by, minus one */
+#define CLKPWR_CLKOUTCFG_CLKOUTDIV(n) ((uint32_t)((n&0x0F)<<4))
+/** CLKOUT enable control */
+#define CLKPWR_CLKOUTCFG_CLKOUT_EN ((uint32_t)(1<<8))
+/** CLKOUT activity indication */
+#define CLKPWR_CLKOUTCFG_CLKOUT_ACT ((uint32_t)(1<<9))
+/** Clock source selection bit mask */
+#define CLKPWR_CLKOUTCFG_BITMASK ((uint32_t)(0x3FF))
+
+
+/* PLL 0 control definition */
+/** PLL 0 control enable */
+#define CLKPWR_PLL0CON_ENABLE ((uint32_t)(0x01))
+/** PLL 0 control connect */
+#define CLKPWR_PLL0CON_CONNECT ((uint32_t)(0x02))
+/** PLL 0 control bit mask */
+#define CLKPWR_PLL0CON_BITMASK ((uint32_t)(0x03))
+
+
+/* PLL 0 Configuration register definition */
+/** PLL 0 Configuration MSEL field */
+#define CLKPWR_PLL0CFG_MSEL(n) ((uint32_t)(n&0x7FFF))
+/** PLL 0 Configuration NSEL field */
+#define CLKPWR_PLL0CFG_NSEL(n) ((uint32_t)((n<<16)&0xFF0000))
+/** PLL 0 Configuration bit mask */
+#define CLKPWR_PLL0CFG_BITMASK ((uint32_t)(0xFF7FFF))
+
+
+/* PLL 0 status definition */
+/** PLL 0 MSEL value */
+#define CLKPWR_PLL0STAT_MSEL(n) ((uint32_t)(n&0x7FFF))
+/** PLL NSEL get value */
+#define CLKPWR_PLL0STAT_NSEL(n) ((uint32_t)((n>>16)&0xFF))
+/** PLL status enable bit */
+#define CLKPWR_PLL0STAT_PLLE ((uint32_t)(1<<24))
+/** PLL status Connect bit */
+#define CLKPWR_PLL0STAT_PLLC ((uint32_t)(1<<25))
+/** PLL status lock */
+#define CLKPWR_PLL0STAT_PLOCK ((uint32_t)(1<<26))
+
+
+/* PLL0 Feed register definition */
+/** PLL0 Feed bit mask */
+#define CLKPWR_PLL0FEED_BITMASK ((uint32_t)0xFF)
+
+
+/* USB PLL control definition */
+/** USB PLL control enable */
+#define CLKPWR_PLL1CON_ENABLE ((uint32_t)(0x01))
+/** USB PLL control connect */
+#define CLKPWR_PLL1CON_CONNECT ((uint32_t)(0x02))
+/** USB PLL control bit mask */
+#define CLKPWR_PLL1CON_BITMASK ((uint32_t)(0x03))
+
+
+/* USB PLL configuration definition */
+/** USB PLL MSEL set value */
+#define CLKPWR_PLL1CFG_MSEL(n) ((uint32_t)(n&0x1F))
+/** USB PLL PSEL set value */
+#define CLKPWR_PLL1CFG_PSEL(n) ((uint32_t)((n&0x03)<<5))
+/** USB PLL configuration bit mask */
+#define CLKPWR_PLL1CFG_BITMASK ((uint32_t)(0x7F))
+
+
+/* USB PLL status definition */
+/** USB PLL MSEL get value */
+#define CLKPWR_PLL1STAT_MSEL(n) ((uint32_t)(n&0x1F))
+/** USB PLL PSEL get value */
+#define CLKPWR_PLL1STAT_PSEL(n) ((uint32_t)((n>>5)&0x03))
+/** USB PLL status enable bit */
+#define CLKPWR_PLL1STAT_PLLE ((uint32_t)(1<<8))
+/** USB PLL status Connect bit */
+#define CLKPWR_PLL1STAT_PLLC ((uint32_t)(1<<9))
+/** USB PLL status lock */
+#define CLKPWR_PLL1STAT_PLOCK ((uint32_t)(1<<10))
+
+
+/* PLL1 Feed register definition */
+/** PLL1 Feed bit mask */
+#define CLKPWR_PLL1FEED_BITMASK ((uint32_t)0xFF)
+
+
+/* CPU Clock Configuration register definition */
+/** CPU Clock configuration bit mask */
+#define CLKPWR_CCLKCFG_BITMASK ((uint32_t)(0xFF))
+
+/* USB Clock Configuration register definition */
+/** USB Clock Configuration bit mask */
+#define CLKPWR_USBCLKCFG_BITMASK ((uint32_t)(0x0F))
+
+/* IRC Trim register definition */
+/** IRC Trim bit mask */
+#define CLKPWR_IRCTRIM_BITMASK ((uint32_t)(0x0F))
+
+
+/* Peripheral clock divider bit position definition */
+/** Peripheral Clock Selection 0 mask bit */
+#define CLKPWR_PCLKSEL0_BITMASK ((uint32_t)(0xFFF3F3FF))
+/** Peripheral Clock Selection 1 mask bit */
+#define CLKPWR_PCLKSEL1_BITMASK ((uint32_t)(0xFCF3F0F3))
+
+
+/** Macro to set peripheral clock of each type
+ * p: position of two bits that hold divider of peripheral clock
+ * n: value of divider of peripheral clock to be set */
+#define CLKPWR_PCLKSEL_SET(p,n) _SBF(p,n)
+/** Macro to mask peripheral clock of each type */
+#define CLKPWR_PCLKSEL_BITMASK(p) _SBF(p,0x03)
+/** Macro to get peripheral clock of each type */
+#define CLKPWR_PCLKSEL_GET(p, n) ((uint32_t)((n>>p)&0x03))
+
+
+/* Power Mode Control register definition */
+/** Power mode control bit 0 */
+#define CLKPWR_PCON_PM0 ((uint32_t)(1<<0))
+/** Power mode control bit 1 */
+#define CLKPWR_PCON_PM1 ((uint32_t)(1<<1))
+/** Brown-Out Reduced Power Mode */
+#define CLKPWR_PCON_BODPDM ((uint32_t)(1<<2))
+/** Brown-Out Global Disable */
+#define CLKPWR_PCON_BOGD ((uint32_t)(1<<3))
+/** Brown Out Reset Disable */
+#define CLKPWR_PCON_BORD ((uint32_t)(1<<4))
+/** Sleep Mode entry flag */
+#define CLKPWR_PCON_SMFLAG ((uint32_t)(1<<8))
+/** Deep Sleep entry flag */
+#define CLKPWR_PCON_DSFLAG ((uint32_t)(1<<9))
+/** Power-down entry flag */
+#define CLKPWR_PCON_PDFLAG ((uint32_t)(1<<10))
+/** Deep Power-down entry flag */
+#define CLKPWR_PCON_DPDFLAG ((uint32_t)(1<<11))
+
+
+/** Power Control for Peripherals bit mask */
+#define CLKPWR_PCONP_BITMASK 0xEFEFF7DE
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Public Macros -------------------------------------------------------------- */
+/** @defgroup CLKPWR_Public_Macros
+ * @{
+ */
+
+/**********************************************************************
+ * Peripheral Clock Selection Definitions
+ **********************************************************************/
+/** Peripheral clock divider bit position for WDT */
+#define CLKPWR_PCLKSEL_WDT ((uint32_t)(0))
+/** Peripheral clock divider bit position for TIMER0 */
+#define CLKPWR_PCLKSEL_TIMER0 ((uint32_t)(2))
+/** Peripheral clock divider bit position for TIMER1 */
+#define CLKPWR_PCLKSEL_TIMER1 ((uint32_t)(4))
+/** Peripheral clock divider bit position for UART0 */
+#define CLKPWR_PCLKSEL_UART0 ((uint32_t)(6))
+/** Peripheral clock divider bit position for UART1 */
+#define CLKPWR_PCLKSEL_UART1 ((uint32_t)(8))
+/** Peripheral clock divider bit position for PWM1 */
+#define CLKPWR_PCLKSEL_PWM1 ((uint32_t)(12))
+/** Peripheral clock divider bit position for I2C0 */
+#define CLKPWR_PCLKSEL_I2C0 ((uint32_t)(14))
+/** Peripheral clock divider bit position for SPI */
+#define CLKPWR_PCLKSEL_SPI ((uint32_t)(16))
+/** Peripheral clock divider bit position for SSP1 */
+#define CLKPWR_PCLKSEL_SSP1 ((uint32_t)(20))
+/** Peripheral clock divider bit position for DAC */
+#define CLKPWR_PCLKSEL_DAC ((uint32_t)(22))
+/** Peripheral clock divider bit position for ADC */
+#define CLKPWR_PCLKSEL_ADC ((uint32_t)(24))
+/** Peripheral clock divider bit position for CAN1 */
+#define CLKPWR_PCLKSEL_CAN1 ((uint32_t)(26))
+/** Peripheral clock divider bit position for CAN2 */
+#define CLKPWR_PCLKSEL_CAN2 ((uint32_t)(28))
+/** Peripheral clock divider bit position for ACF */
+#define CLKPWR_PCLKSEL_ACF ((uint32_t)(30))
+/** Peripheral clock divider bit position for QEI */
+#define CLKPWR_PCLKSEL_QEI ((uint32_t)(32))
+/** Peripheral clock divider bit position for PCB */
+#define CLKPWR_PCLKSEL_PCB ((uint32_t)(36))
+/** Peripheral clock divider bit position for I2C1 */
+#define CLKPWR_PCLKSEL_I2C1 ((uint32_t)(38))
+/** Peripheral clock divider bit position for SSP0 */
+#define CLKPWR_PCLKSEL_SSP0 ((uint32_t)(42))
+/** Peripheral clock divider bit position for TIMER2 */
+#define CLKPWR_PCLKSEL_TIMER2 ((uint32_t)(44))
+/** Peripheral clock divider bit position for TIMER3 */
+#define CLKPWR_PCLKSEL_TIMER3 ((uint32_t)(46))
+/** Peripheral clock divider bit position for UART2 */
+#define CLKPWR_PCLKSEL_UART2 ((uint32_t)(48))
+/** Peripheral clock divider bit position for UART3 */
+#define CLKPWR_PCLKSEL_UART3 ((uint32_t)(50))
+/** Peripheral clock divider bit position for I2C2 */
+#define CLKPWR_PCLKSEL_I2C2 ((uint32_t)(52))
+/** Peripheral clock divider bit position for I2S */
+#define CLKPWR_PCLKSEL_I2S ((uint32_t)(54))
+/** Peripheral clock divider bit position for RIT */
+#define CLKPWR_PCLKSEL_RIT ((uint32_t)(58))
+/** Peripheral clock divider bit position for SYSCON */
+#define CLKPWR_PCLKSEL_SYSCON ((uint32_t)(60))
+/** Peripheral clock divider bit position for MC */
+#define CLKPWR_PCLKSEL_MC ((uint32_t)(62))
+
+/** Macro for Peripheral Clock Selection register bit values
+ * Note: When CCLK_DIV_8, Peripherals clock is selected to
+ * PCLK_xyz = CCLK/8 except for CAN1, CAN2, and CAN filtering
+ * when 11selects PCLK_xyz = CCLK/6 */
+/* Peripheral clock divider is set to 4 from CCLK */
+#define CLKPWR_PCLKSEL_CCLK_DIV_4 ((uint32_t)(0))
+/** Peripheral clock divider is the same with CCLK */
+#define CLKPWR_PCLKSEL_CCLK_DIV_1 ((uint32_t)(1))
+/** Peripheral clock divider is set to 2 from CCLK */
+#define CLKPWR_PCLKSEL_CCLK_DIV_2 ((uint32_t)(2))
+
+
+/********************************************************************
+* Power Control for Peripherals Definitions
+**********************************************************************/
+/** Timer/Counter 0 power/clock control bit */
+#define CLKPWR_PCONP_PCTIM0 ((uint32_t)(1<<1))
+/* Timer/Counter 1 power/clock control bit */
+#define CLKPWR_PCONP_PCTIM1 ((uint32_t)(1<<2))
+/** UART0 power/clock control bit */
+#define CLKPWR_PCONP_PCUART0 ((uint32_t)(1<<3))
+/** UART1 power/clock control bit */
+#define CLKPWR_PCONP_PCUART1 ((uint32_t)(1<<4))
+/** PWM1 power/clock control bit */
+#define CLKPWR_PCONP_PCPWM1 ((uint32_t)(1<<6))
+/** The I2C0 interface power/clock control bit */
+#define CLKPWR_PCONP_PCI2C0 ((uint32_t)(1<<7))
+/** The SPI interface power/clock control bit */
+#define CLKPWR_PCONP_PCSPI ((uint32_t)(1<<8))
+/** The RTC power/clock control bit */
+#define CLKPWR_PCONP_PCRTC ((uint32_t)(1<<9))
+/** The SSP1 interface power/clock control bit */
+#define CLKPWR_PCONP_PCSSP1 ((uint32_t)(1<<10))
+/** A/D converter 0 (ADC0) power/clock control bit */
+#define CLKPWR_PCONP_PCAD ((uint32_t)(1<<12))
+/** CAN Controller 1 power/clock control bit */
+#define CLKPWR_PCONP_PCAN1 ((uint32_t)(1<<13))
+/** CAN Controller 2 power/clock control bit */
+#define CLKPWR_PCONP_PCAN2 ((uint32_t)(1<<14))
+/** GPIO power/clock control bit */
+#define CLKPWR_PCONP_PCGPIO ((uint32_t)(1<<15))
+/** Repetitive Interrupt Timer power/clock control bit */
+#define CLKPWR_PCONP_PCRIT ((uint32_t)(1<<16))
+/** Motor Control PWM */
+#define CLKPWR_PCONP_PCMC ((uint32_t)(1<<17))
+/** Quadrature Encoder Interface power/clock control bit */
+#define CLKPWR_PCONP_PCQEI ((uint32_t)(1<<18))
+/** The I2C1 interface power/clock control bit */
+#define CLKPWR_PCONP_PCI2C1 ((uint32_t)(1<<19))
+/** The SSP0 interface power/clock control bit */
+#define CLKPWR_PCONP_PCSSP0 ((uint32_t)(1<<21))
+/** Timer 2 power/clock control bit */
+#define CLKPWR_PCONP_PCTIM2 ((uint32_t)(1<<22))
+/** Timer 3 power/clock control bit */
+#define CLKPWR_PCONP_PCTIM3 ((uint32_t)(1<<23))
+/** UART 2 power/clock control bit */
+#define CLKPWR_PCONP_PCUART2 ((uint32_t)(1<<24))
+/** UART 3 power/clock control bit */
+#define CLKPWR_PCONP_PCUART3 ((uint32_t)(1<<25))
+/** I2C interface 2 power/clock control bit */
+#define CLKPWR_PCONP_PCI2C2 ((uint32_t)(1<<26))
+/** I2S interface power/clock control bit*/
+#define CLKPWR_PCONP_PCI2S ((uint32_t)(1<<27))
+/** GP DMA function power/clock control bit*/
+#define CLKPWR_PCONP_PCGPDMA ((uint32_t)(1<<29))
+/** Ethernet block power/clock control bit*/
+#define CLKPWR_PCONP_PCENET ((uint32_t)(1<<30))
+/** USB interface power/clock control bit*/
+#define CLKPWR_PCONP_PCUSB ((uint32_t)(1<<31))
+
+
+/**
+ * @}
+ */
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup CLKPWR_Public_Functions
+ * @{
+ */
+ #define CHECK_PARAM ;
+
+void CLKPWR_SetPCLKDiv (uint32_t ClkType, uint32_t DivVal);
+uint32_t CLKPWR_GetPCLKSEL (uint32_t ClkType);
+uint32_t CLKPWR_GetPCLK (uint32_t ClkType);
+void CLKPWR_ConfigPPWR (uint32_t PPType, FunctionalState NewState);
+void CLKPWR_Sleep(void);
+void CLKPWR_DeepSleep(void);
+void CLKPWR_PowerDown(void);
+void CLKPWR_DeepPowerDown(void);
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* LPC17XX_CLKPWR_H_ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/lpc17xx_i2c.h Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,383 @@
+/**********************************************************************
+* $Id$ lpc17xx_i2c.h 2010-05-21
+*//**
+* @file lpc17xx_i2c.h
+* @brief Contains all macro definitions and function prototypes
+* support for I2C firmware library on LPC17xx
+* @version 2.0
+* @date 21. May. 2010
+* @author NXP MCU SW Application Team
+*
+* Copyright(C) 2010, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+**********************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @defgroup I2C I2C (Inter-IC Control bus)
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+#ifndef LPC17XX_I2C_H_
+#define LPC17XX_I2C_H_
+
+/* Includes ------------------------------------------------------------------- */
+#include "LPC17xx.h"
+#include "lpc_types.h"
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+/* Private Macros ------------------------------------------------------------- */
+/** @defgroup I2C_Private_Macros I2C Private Macros
+ * @{
+ */
+
+/* --------------------- BIT DEFINITIONS -------------------------------------- */
+/*******************************************************************//**
+ * I2C Control Set register description
+ *********************************************************************/
+#define I2C_I2CONSET_AA ((0x04)) /*!< Assert acknowledge flag */
+#define I2C_I2CONSET_SI ((0x08)) /*!< I2C interrupt flag */
+#define I2C_I2CONSET_STO ((0x10)) /*!< STOP flag */
+#define I2C_I2CONSET_STA ((0x20)) /*!< START flag */
+#define I2C_I2CONSET_I2EN ((0x40)) /*!< I2C interface enable */
+
+/*******************************************************************//**
+ * I2C Control Clear register description
+ *********************************************************************/
+/** Assert acknowledge Clear bit */
+#define I2C_I2CONCLR_AAC ((1<<2))
+/** I2C interrupt Clear bit */
+#define I2C_I2CONCLR_SIC ((1<<3))
+/** START flag Clear bit */
+#define I2C_I2CONCLR_STAC ((1<<5))
+/** I2C interface Disable bit */
+#define I2C_I2CONCLR_I2ENC ((1<<6))
+
+/********************************************************************//**
+ * I2C Status Code definition (I2C Status register)
+ *********************************************************************/
+/* Return Code in I2C status register */
+#define I2C_STAT_CODE_BITMASK ((0xF8))
+
+/* I2C return status code definitions ----------------------------- */
+
+/** No relevant information */
+#define I2C_I2STAT_NO_INF ((0xF8))
+
+/* Master transmit mode -------------------------------------------- */
+/** A start condition has been transmitted */
+#define I2C_I2STAT_M_TX_START ((0x08))
+/** A repeat start condition has been transmitted */
+#define I2C_I2STAT_M_TX_RESTART ((0x10))
+/** SLA+W has been transmitted, ACK has been received */
+#define I2C_I2STAT_M_TX_SLAW_ACK ((0x18))
+/** SLA+W has been transmitted, NACK has been received */
+#define I2C_I2STAT_M_TX_SLAW_NACK ((0x20))
+/** Data has been transmitted, ACK has been received */
+#define I2C_I2STAT_M_TX_DAT_ACK ((0x28))
+/** Data has been transmitted, NACK has been received */
+#define I2C_I2STAT_M_TX_DAT_NACK ((0x30))
+/** Arbitration lost in SLA+R/W or Data bytes */
+#define I2C_I2STAT_M_TX_ARB_LOST ((0x38))
+
+/* Master receive mode -------------------------------------------- */
+/** A start condition has been transmitted */
+#define I2C_I2STAT_M_RX_START ((0x08))
+/** A repeat start condition has been transmitted */
+#define I2C_I2STAT_M_RX_RESTART ((0x10))
+/** Arbitration lost */
+#define I2C_I2STAT_M_RX_ARB_LOST ((0x38))
+/** SLA+R has been transmitted, ACK has been received */
+#define I2C_I2STAT_M_RX_SLAR_ACK ((0x40))
+/** SLA+R has been transmitted, NACK has been received */
+#define I2C_I2STAT_M_RX_SLAR_NACK ((0x48))
+/** Data has been received, ACK has been returned */
+#define I2C_I2STAT_M_RX_DAT_ACK ((0x50))
+/** Data has been received, NACK has been return */
+#define I2C_I2STAT_M_RX_DAT_NACK ((0x58))
+
+/* Slave receive mode -------------------------------------------- */
+/** Own slave address has been received, ACK has been returned */
+#define I2C_I2STAT_S_RX_SLAW_ACK ((0x60))
+
+/** Arbitration lost in SLA+R/W as master */
+#define I2C_I2STAT_S_RX_ARB_LOST_M_SLA ((0x68))
+/** Own SLA+W has been received, ACK returned */
+//#define I2C_I2STAT_S_RX_SLAW_ACK ((0x68))
+
+/** General call address has been received, ACK has been returned */
+#define I2C_I2STAT_S_RX_GENCALL_ACK ((0x70))
+
+/** Arbitration lost in SLA+R/W (GENERAL CALL) as master */
+#define I2C_I2STAT_S_RX_ARB_LOST_M_GENCALL ((0x78))
+/** General call address has been received, ACK has been returned */
+//#define I2C_I2STAT_S_RX_GENCALL_ACK ((0x78))
+
+/** Previously addressed with own SLV address;
+ * Data has been received, ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_SLA_DAT_ACK ((0x80))
+/** Previously addressed with own SLA;
+ * Data has been received and NOT ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_SLA_DAT_NACK ((0x88))
+/** Previously addressed with General Call;
+ * Data has been received and ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_GENCALL_DAT_ACK ((0x90))
+/** Previously addressed with General Call;
+ * Data has been received and NOT ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_GENCALL_DAT_NACK ((0x98))
+/** A STOP condition or repeated START condition has
+ * been received while still addressed as SLV/REC
+ * (Slave Receive) or SLV/TRX (Slave Transmit) */
+#define I2C_I2STAT_S_RX_STA_STO_SLVREC_SLVTRX ((0xA0))
+
+/** Slave transmit mode */
+/** Own SLA+R has been received, ACK has been returned */
+#define I2C_I2STAT_S_TX_SLAR_ACK ((0xA8))
+
+/** Arbitration lost in SLA+R/W as master */
+#define I2C_I2STAT_S_TX_ARB_LOST_M_SLA ((0xB0))
+/** Own SLA+R has been received, ACK has been returned */
+//#define I2C_I2STAT_S_TX_SLAR_ACK ((0xB0))
+
+/** Data has been transmitted, ACK has been received */
+#define I2C_I2STAT_S_TX_DAT_ACK ((0xB8))
+/** Data has been transmitted, NACK has been received */
+#define I2C_I2STAT_S_TX_DAT_NACK ((0xC0))
+/** Last data byte in I2DAT has been transmitted (AA = 0);
+ ACK has been received */
+#define I2C_I2STAT_S_TX_LAST_DAT_ACK ((0xC8))
+
+/** Time out in case of using I2C slave mode */
+#define I2C_SLAVE_TIME_OUT 0x10000UL
+
+/********************************************************************//**
+ * I2C Data register definition
+ *********************************************************************/
+/** Mask for I2DAT register*/
+#define I2C_I2DAT_BITMASK ((0xFF))
+
+/** Idle data value will be send out in slave mode in case of the actual
+ * expecting data requested from the master is greater than its sending data
+ * length that can be supported */
+#define I2C_I2DAT_IDLE_CHAR (0xFF)
+
+/********************************************************************//**
+ * I2C Monitor mode control register description
+ *********************************************************************/
+#define I2C_I2MMCTRL_MM_ENA ((1<<0)) /**< Monitor mode enable */
+#define I2C_I2MMCTRL_ENA_SCL ((1<<1)) /**< SCL output enable */
+#define I2C_I2MMCTRL_MATCH_ALL ((1<<2)) /**< Select interrupt register match */
+#define I2C_I2MMCTRL_BITMASK ((0x07)) /**< Mask for I2MMCTRL register */
+
+/********************************************************************//**
+ * I2C Data buffer register description
+ *********************************************************************/
+/** I2C Data buffer register bit mask */
+#define I2DATA_BUFFER_BITMASK ((0xFF))
+
+/********************************************************************//**
+ * I2C Slave Address registers definition
+ *********************************************************************/
+/** General Call enable bit */
+#define I2C_I2ADR_GC ((1<<0))
+/** I2C Slave Address registers bit mask */
+#define I2C_I2ADR_BITMASK ((0xFF))
+
+/********************************************************************//**
+ * I2C Mask Register definition
+ *********************************************************************/
+/** I2C Mask Register mask field */
+#define I2C_I2MASK_MASK(n) ((n&0xFE))
+
+/********************************************************************//**
+ * I2C SCL HIGH duty cycle Register definition
+ *********************************************************************/
+/** I2C SCL HIGH duty cycle Register bit mask */
+#define I2C_I2SCLH_BITMASK ((0xFFFF))
+
+/********************************************************************//**
+ * I2C SCL LOW duty cycle Register definition
+ *********************************************************************/
+/** I2C SCL LOW duty cycle Register bit mask */
+#define I2C_I2SCLL_BITMASK ((0xFFFF))
+
+/* I2C status values */
+#define I2C_SETUP_STATUS_ARBF (1<<8) /**< Arbitration false */
+#define I2C_SETUP_STATUS_NOACKF (1<<9) /**< No ACK returned */
+#define I2C_SETUP_STATUS_DONE (1<<10) /**< Status DONE */
+
+/*********************************************************************//**
+ * I2C monitor control configuration defines
+ **********************************************************************/
+#define I2C_MONITOR_CFG_SCL_OUTPUT I2C_I2MMCTRL_ENA_SCL /**< SCL output enable */
+#define I2C_MONITOR_CFG_MATCHALL I2C_I2MMCTRL_MATCH_ALL /**< Select interrupt register match */
+
+/* ---------------- CHECK PARAMETER DEFINITIONS ---------------------------- */
+/* Macros check I2C slave address */
+#define PARAM_I2C_SLAVEADDR_CH(n) ((n>=0) && (n<=3))
+
+/** Macro to determine if it is valid SSP port number */
+#define PARAM_I2Cx(n) ((((uint32_t *)n)==((uint32_t *)LPC_I2C0)) \
+|| (((uint32_t *)n)==((uint32_t *)LPC_I2C1)) \
+|| (((uint32_t *)n)==((uint32_t *)LPC_I2C2)))
+
+/* Macros check I2C monitor configuration type */
+#define PARAM_I2C_MONITOR_CFG(n) ((n==I2C_MONITOR_CFG_SCL_OUTPUT) || (I2C_MONITOR_CFG_MATCHALL))
+
+/**
+ * @}
+ */
+
+
+
+/* Public Types --------------------------------------------------------------- */
+/** @defgroup I2C_Public_Types I2C Public Types
+ * @{
+ */
+
+/**
+ * @brief I2C Own slave address setting structure
+ */
+typedef struct {
+ uint8_t SlaveAddrChannel; /**< Slave Address channel in I2C control,
+ should be in range from 0..3
+ */
+ uint8_t SlaveAddr_7bit; /**< Value of 7-bit slave address */
+ uint8_t GeneralCallState; /**< Enable/Disable General Call Functionality
+ when I2C control being in Slave mode, should be:
+ - ENABLE: Enable General Call function.
+ - DISABLE: Disable General Call function.
+ */
+ uint8_t SlaveAddrMaskValue; /**< Any bit in this 8-bit value (bit 7:1)
+ which is set to '1' will cause an automatic compare on
+ the corresponding bit of the received address when it
+ is compared to the SlaveAddr_7bit value associated with this
+ mask register. In other words, bits in SlaveAddr_7bit value
+ which are masked are not taken into account in determining
+ an address match
+ */
+} I2C_OWNSLAVEADDR_CFG_Type;
+
+
+/**
+ * @brief Master transfer setup data structure definitions
+ */
+typedef struct
+{
+ uint32_t sl_addr7bit; /**< Slave address in 7bit mode */
+ uint8_t* tx_data; /**< Pointer to Transmit data - NULL if data transmit
+ is not used */
+ uint32_t tx_length; /**< Transmit data length - 0 if data transmit
+ is not used*/
+ uint32_t tx_count; /**< Current Transmit data counter */
+ uint8_t* rx_data; /**< Pointer to Receive data - NULL if data receive
+ is not used */
+ uint32_t rx_length; /**< Receive data length - 0 if data receive is
+ not used */
+ uint32_t rx_count; /**< Current Receive data counter */
+ uint32_t retransmissions_max; /**< Max Re-Transmission value */
+ uint32_t retransmissions_count; /**< Current Re-Transmission counter */
+ uint32_t status; /**< Current status of I2C activity */
+ void (*callback)(void); /**< Pointer to Call back function when transmission complete
+ used in interrupt transfer mode */
+} I2C_M_SETUP_Type;
+
+
+/**
+ * @brief Slave transfer setup data structure definitions
+ */
+typedef struct
+{
+ uint8_t* tx_data;
+ uint32_t tx_length;
+ uint32_t tx_count;
+ uint8_t* rx_data;
+ uint32_t rx_length;
+ uint32_t rx_count;
+ uint32_t status;
+ void (*callback)(void);
+} I2C_S_SETUP_Type;
+
+/**
+ * @brief Transfer option type definitions
+ */
+typedef enum {
+ I2C_TRANSFER_POLLING = 0, /**< Transfer in polling mode */
+ I2C_TRANSFER_INTERRUPT /**< Transfer in interrupt mode */
+} I2C_TRANSFER_OPT_Type;
+
+
+/**
+ * @}
+ */
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup I2C_Public_Functions I2C Public Functions
+ * @{
+ */
+
+/* I2C Init/DeInit functions ---------- */
+void I2C_Init(LPC_I2C_TypeDef *I2Cx, uint32_t clockrate);
+void I2C_DeInit(LPC_I2C_TypeDef* I2Cx);
+//void I2C_SetClock (LPC_I2C_TypeDef *I2Cx, uint32_t target_clock);
+void I2C_Cmd(LPC_I2C_TypeDef* I2Cx, FunctionalState NewState);
+
+/* I2C transfer data functions -------- */
+Status I2C_MasterTransferData(LPC_I2C_TypeDef *I2Cx, \
+ I2C_M_SETUP_Type *TransferCfg, I2C_TRANSFER_OPT_Type Opt);
+Status I2C_SlaveTransferData(LPC_I2C_TypeDef *I2Cx, \
+ I2C_S_SETUP_Type *TransferCfg, I2C_TRANSFER_OPT_Type Opt);
+uint32_t I2C_MasterTransferComplete(LPC_I2C_TypeDef *I2Cx);
+uint32_t I2C_SlaveTransferComplete(LPC_I2C_TypeDef *I2Cx);
+
+
+void I2C_SetOwnSlaveAddr(LPC_I2C_TypeDef *I2Cx, I2C_OWNSLAVEADDR_CFG_Type *OwnSlaveAddrConfigStruct);
+uint8_t I2C_GetLastStatusCode(LPC_I2C_TypeDef* I2Cx);
+
+/* I2C Monitor functions ---------------*/
+void I2C_MonitorModeConfig(LPC_I2C_TypeDef *I2Cx, uint32_t MonitorCfgType, FunctionalState NewState);
+void I2C_MonitorModeCmd(LPC_I2C_TypeDef *I2Cx, FunctionalState NewState);
+uint8_t I2C_MonitorGetDatabuffer(LPC_I2C_TypeDef *I2Cx);
+BOOL_8 I2C_MonitorHandler(LPC_I2C_TypeDef *I2Cx, uint8_t *buffer, uint32_t size);
+
+/* I2C Interrupt handler functions ------*/
+void I2C_IntCmd (LPC_I2C_TypeDef *I2Cx, Bool NewState);
+void I2C_MasterHandler (LPC_I2C_TypeDef *I2Cx);
+void I2C_SlaveHandler (LPC_I2C_TypeDef *I2Cx);
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* LPC17XX_I2C_H_ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/lpc17xx_libcfg_default.h Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,153 @@
+/***********************************************************************//**
+ * @file lpc17xx_libcfg_default.h
+ * @brief Default Library configuration header file
+ * @version 2.0
+ * @date 21. May. 2010
+ * @author NXP MCU SW Application Team
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **************************************************************************/
+
+/* Library Configuration group ----------------------------------------------------------- */
+/** @defgroup LIBCFG_DEFAULT LIBCFG_DEFAULT
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+#ifndef LPC17XX_LIBCFG_DEFAULT_H_
+#define LPC17XX_LIBCFG_DEFAULT_H_
+
+/* Includes ------------------------------------------------------------------- */
+#include "lpc_types.h"
+
+
+/* Public Macros -------------------------------------------------------------- */
+/** @defgroup LIBCFG_DEFAULT_Public_Macros LIBCFG_DEFAULT Public Macros
+ * @{
+ */
+
+/************************** DEBUG MODE DEFINITIONS *********************************/
+/* Un-comment the line below to compile the library in DEBUG mode, this will expanse
+ the "CHECK_PARAM" macro in the FW library code */
+
+#define DEBUG
+
+
+/******************* PERIPHERAL FW LIBRARY CONFIGURATION DEFINITIONS ***********************/
+/* Comment the line below to disable the specific peripheral inclusion */
+
+/* DEBUG_FRAMWORK ------------------------------ */
+#define _DBGFWK
+
+/* GPIO ------------------------------- */
+#define _GPIO
+
+/* EXTI ------------------------------- */
+#define _EXTI
+
+/* UART ------------------------------- */
+#define _UART
+#define _UART0
+#define _UART1
+#define _UART2
+#define _UART3
+
+/* SPI ------------------------------- */
+#define _SPI
+
+/* SYSTICK --------------------------- */
+#define _SYSTICK
+
+/* SSP ------------------------------- */
+#define _SSP
+#define _SSP0
+#define _SSP1
+
+
+/* I2C ------------------------------- */
+#define _I2C
+#define _I2C0
+#define _I2C1
+#define _I2C2
+
+/* TIMER ------------------------------- */
+#define _TIM
+
+/* WDT ------------------------------- */
+#define _WDT
+
+
+/* GPDMA ------------------------------- */
+#define _GPDMA
+
+
+/* DAC ------------------------------- */
+#define _DAC
+
+/* DAC ------------------------------- */
+#define _ADC
+
+
+/* PWM ------------------------------- */
+#define _PWM
+#define _PWM1
+
+/* RTC ------------------------------- */
+#define _RTC
+
+/* I2S ------------------------------- */
+#define _I2S
+
+/* USB device ------------------------------- */
+#define _USBDEV
+#define _USB_DMA
+
+/* QEI ------------------------------- */
+#define _QEI
+
+/* MCPWM ------------------------------- */
+#define _MCPWM
+
+/* CAN--------------------------------*/
+#define _CAN
+
+/* RIT ------------------------------- */
+#define _RIT
+
+/* EMAC ------------------------------ */
+#define _EMAC
+
+/************************** GLOBAL/PUBLIC MACRO DEFINITIONS *********************************/
+
+
+/**
+ * @}
+ */
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup LIBCFG_DEFAULT_Public_Functions LIBCFG_DEFAULT Public Functions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+#endif /* LPC17XX_LIBCFG_DEFAULT_H_ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/lpc17xx_pinsel.h Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,209 @@
+/***********************************************************************//**
+ * @file : lpc17xx_pinsel.h
+ * @brief : Contains all macro definitions and function prototypes
+ * support for Pin connect block firmware library on LPC17xx
+ * @version : 1.0
+ * @date : 25. Feb. 2009
+ * @author : HoanTran
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **************************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @defgroup PINSEL
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+#ifndef LPC17XX_PINSEL_H_
+#define LPC17XX_PINSEL_H_
+
+/* Includes ------------------------------------------------------------------- */
+#include "cmsis.h"
+#include "lpc_types.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+/* Private Macros ------------------------------------------------------------- */
+/** @defgroup PINSEL_Private_Macros
+ * @{
+ */
+
+/** @defgroup PINSEL_REGISTER_BIT_DEFINITIONS
+ * @{
+ */
+
+/* Pin selection define */
+/* I2C Pin Configuration register bit description */
+#define PINSEL_I2CPADCFG_SDADRV0 _BIT(0) /**< Drive mode control for the SDA0 pin, P0.27 */
+#define PINSEL_I2CPADCFG_SDAI2C0 _BIT(1) /**< I2C mode control for the SDA0 pin, P0.27 */
+#define PINSEL_I2CPADCFG_SCLDRV0 _BIT(2) /**< Drive mode control for the SCL0 pin, P0.28 */
+#define PINSEL_I2CPADCFG_SCLI2C0 _BIT(3) /**< I2C mode control for the SCL0 pin, P0.28 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Public Macros -------------------------------------------------------------- */
+/** @defgroup PINSEL_Public_Macros
+ * @{
+ */
+
+/*********************************************************************//**
+ *!< Macros define for PORT Selection
+ ***********************************************************************/
+#define PINSEL_PORT_0 ((0)) /**< PORT 0*/
+#define PINSEL_PORT_1 ((1)) /**< PORT 1*/
+#define PINSEL_PORT_2 ((2)) /**< PORT 2*/
+#define PINSEL_PORT_3 ((3)) /**< PORT 3*/
+#define PINSEL_PORT_4 ((4)) /**< PORT 4*/
+
+
+/***********************************************************************
+ * Macros define for Pin Function selection
+ **********************************************************************/
+#define PINSEL_FUNC_0 ((0)) /**< default function*/
+#define PINSEL_FUNC_1 ((1)) /**< first alternate function*/
+#define PINSEL_FUNC_2 ((2)) /**< second alternate function*/
+#define PINSEL_FUNC_3 ((3)) /**< third or reserved alternate function*/
+
+
+
+/***********************************************************************
+ * Macros define for Pin Number of Port
+ **********************************************************************/
+#define PINSEL_PIN_0 ((0)) /**< Pin 0 */
+#define PINSEL_PIN_1 ((1)) /**< Pin 1 */
+#define PINSEL_PIN_2 ((2)) /**< Pin 2 */
+#define PINSEL_PIN_3 ((3)) /**< Pin 3 */
+#define PINSEL_PIN_4 ((4)) /**< Pin 4 */
+#define PINSEL_PIN_5 ((5)) /**< Pin 5 */
+#define PINSEL_PIN_6 ((6)) /**< Pin 6 */
+#define PINSEL_PIN_7 ((7)) /**< Pin 7 */
+#define PINSEL_PIN_8 ((8)) /**< Pin 8 */
+#define PINSEL_PIN_9 ((9)) /**< Pin 9 */
+#define PINSEL_PIN_10 ((10)) /**< Pin 10 */
+#define PINSEL_PIN_11 ((11)) /**< Pin 11 */
+#define PINSEL_PIN_12 ((12)) /**< Pin 12 */
+#define PINSEL_PIN_13 ((13)) /**< Pin 13 */
+#define PINSEL_PIN_14 ((14)) /**< Pin 14 */
+#define PINSEL_PIN_15 ((15)) /**< Pin 15 */
+#define PINSEL_PIN_16 ((16)) /**< Pin 16 */
+#define PINSEL_PIN_17 ((17)) /**< Pin 17 */
+#define PINSEL_PIN_18 ((18)) /**< Pin 18 */
+#define PINSEL_PIN_19 ((19)) /**< Pin 19 */
+#define PINSEL_PIN_20 ((20)) /**< Pin 20 */
+#define PINSEL_PIN_21 ((21)) /**< Pin 21 */
+#define PINSEL_PIN_22 ((22)) /**< Pin 22 */
+#define PINSEL_PIN_23 ((23)) /**< Pin 23 */
+#define PINSEL_PIN_24 ((24)) /**< Pin 24 */
+#define PINSEL_PIN_25 ((25)) /**< Pin 25 */
+#define PINSEL_PIN_26 ((26)) /**< Pin 26 */
+#define PINSEL_PIN_27 ((27)) /**< Pin 27 */
+#define PINSEL_PIN_28 ((28)) /**< Pin 28 */
+#define PINSEL_PIN_29 ((29)) /**< Pin 29 */
+#define PINSEL_PIN_30 ((30)) /**< Pin 30 */
+#define PINSEL_PIN_31 ((31)) /**< Pin 31 */
+
+
+/***********************************************************************
+ * Macros define for Pin mode
+ **********************************************************************/
+#define PINSEL_PINMODE_PULLUP ((0)) /**< Internal pull-up resistor*/
+#define PINSEL_PINMODE_TRISTATE ((2)) /**< Tri-state */
+#define PINSEL_PINMODE_PULLDOWN ((3)) /**< Internal pull-down resistor */
+
+
+/***********************************************************************
+ * Macros define for Pin mode (normal/open drain)
+ **********************************************************************/
+#define PINSEL_PINMODE_NORMAL ((0)) /**< Pin is in the normal (not open drain) mode.*/
+#define PINSEL_PINMODE_OPENDRAIN ((1)) /**< Pin is in the open drain mode */
+
+
+/***********************************************************************
+ * Macros define for I2C mode
+ ***********************************************************************/
+#define PINSEL_I2C_Normal_Mode ((0)) /**< The standard drive mode */
+#define PINSEL_I2C_Fast_Mode ((1)) /**< Fast Mode Plus drive mode */
+
+
+/**
+ * @}
+ */
+
+
+/* Public Types --------------------------------------------------------------- */
+/** @defgroup PINSEL_Public_Types
+ * @{
+ */
+
+/** @brief Pin configuration structure */
+ typedef struct
+{
+ uint8_t Portnum; /**< Port Number, should be PINSEL_PORT_x,
+ where x should be in range from 0 to 4 */
+ uint8_t Pinnum; /**< Pin Number, should be PINSEL_PIN_x,
+ where x should be in range from 0 to 31 */
+ uint8_t Funcnum; /**< Function Number, should be PINSEL_FUNC_x,
+ where x should be in range from 0 to 3 */
+ uint8_t Pinmode; /**< Pin Mode, should be:
+ - PINSEL_PINMODE_PULLUP: Internal pull-up resistor
+ - PINSEL_PINMODE_TRISTATE: Tri-state
+ - PINSEL_PINMODE_PULLDOWN: Internal pull-down resistor */
+ uint8_t OpenDrain; /**< OpenDrain mode, should be:
+ - PINSEL_PINMODE_NORMAL: Pin is in the normal (not open drain) mode
+ - PINSEL_PINMODE_OPENDRAIN: Pin is in the open drain mode */
+} PINSEL_CFG_Type;
+
+/**
+ * @}
+ */
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup PINSEL_Public_Functions
+ * @{
+ */
+
+void PINSEL_SetPinFunc ( uint8_t portnum, uint8_t pinnum, uint8_t funcnum);
+void PINSEL_ConfigTraceFunc (FunctionalState NewState);
+void PINSEL_SetResistorMode ( uint8_t portnum, uint8_t pinnum, uint8_t modenum);
+void PINSEL_SetOpenDrainMode( uint8_t portnum, uint8_t pinnum, uint8_t modenum);
+void PINSEL_SetI2C0Pins(uint8_t i2cPinMode, FunctionalState filterSlewRateEnable);
+void PINSEL_ConfigPin(PINSEL_CFG_Type *PinCfg);
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* LPC17XX_PINSEL_H_ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/include/lpc_types.h Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,201 @@
+/***********************************************************************//**
+ * @file : lpc_types.h
+ * @brief :
+ * Contains the NXP ABL typedefs for C standard types.
+ * It is intended to be used in ISO C conforming development
+ * environments and checks for this insofar as it is possible
+ * to do so.
+ * @version : 1.0
+ * @date : 27 Jul. 2008
+ * @author : wellsk
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **************************************************************************/
+
+/* Type group ----------------------------------------------------------- */
+/** @defgroup LPC_Types
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+#ifndef LPC_TYPES_H
+#define LPC_TYPES_H
+
+/* Includes ------------------------------------------------------------------- */
+#include <stdint.h>
+
+
+/* Public Types --------------------------------------------------------------- */
+/** @defgroup LPC_Types_Public_Types
+ * @{
+ */
+
+/**
+ * @brief Boolean Type definition
+ */
+typedef enum {FALSE = 0, TRUE = !FALSE} Bool;
+
+/**
+ * @brief Flag Status and Interrupt Flag Status type definition
+ */
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, IntStatus, SetState;
+#define PARAM_SETSTATE(State) ((State==RESET) || (State==SET))
+
+/**
+ * @brief Functional State Definition
+ */
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define PARAM_FUNCTIONALSTATE(State) ((State==DISABLE) || (State==ENABLE))
+
+/**
+ * @ Status type definition
+ */
+typedef enum {ERROR = 0, SUCCESS = !ERROR} Status;
+
+
+/**
+ * Read/Write transfer type mode (Block or non-block)
+ */
+typedef enum
+{
+ NONE_BLOCKING = 0, /**< None Blocking type */
+ BLOCKING, /**< Blocking type */
+} TRANSFER_BLOCK_Type;
+
+
+/** Pointer to Function returning Void (any number of parameters) */
+typedef void (*PFV)();
+
+/** Pointer to Function returning int32_t (any number of parameters) */
+typedef int32_t(*PFI)();
+
+/**
+ * @}
+ */
+
+
+/* Public Macros -------------------------------------------------------------- */
+/** @defgroup LPC_Types_Public_Macros
+ * @{
+ */
+
+/* _BIT(n) sets the bit at position "n"
+ * _BIT(n) is intended to be used in "OR" and "AND" expressions:
+ * e.g., "(_BIT(3) | _BIT(7))".
+ */
+#undef _BIT
+/* Set bit macro */
+#define _BIT(n) (1UL<<n)
+
+/* _SBF(f,v) sets the bit field starting at position "f" to value "v".
+ * _SBF(f,v) is intended to be used in "OR" and "AND" expressions:
+ * e.g., "((_SBF(5,7) | _SBF(12,0xF)) & 0xFFFF)"
+ */
+#undef _SBF
+/* Set bit field macro */
+#define _SBF(f,v) (v<<f)
+
+/* _BITMASK constructs a symbol with 'field_width' least significant
+ * bits set.
+ * e.g., _BITMASK(5) constructs '0x1F', _BITMASK(16) == 0xFFFF
+ * The symbol is intended to be used to limit the bit field width
+ * thusly:
+ * <a_register> = (any_expression) & _BITMASK(x), where 0 < x <= 32.
+ * If "any_expression" results in a value that is larger than can be
+ * contained in 'x' bits, the bits above 'x - 1' are masked off. When
+ * used with the _SBF example above, the example would be written:
+ * a_reg = ((_SBF(5,7) | _SBF(12,0xF)) & _BITMASK(16))
+ * This ensures that the value written to a_reg is no wider than
+ * 16 bits, and makes the code easier to read and understand.
+ */
+#undef _BITMASK
+/* Bitmask creation macro */
+#define _BITMASK(field_width) ( _BIT(field_width) - 1)
+
+/* NULL pointer */
+#ifndef NULL
+#ifdef __cplusplus
+#define NULL 0
+#else
+#define NULL ((void *)0)
+#endif
+#endif
+
+/* Number of elements in an array */
+#define NELEMENTS(array) (sizeof (array) / sizeof (array[0]))
+
+/* Static data/function define */
+#define STATIC static
+/* External data/function define */
+#define EXTERN extern
+
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+/**
+ * @}
+ */
+
+
+/* Old Type Definition compatibility ------------------------------------------ */
+/** @addtogroup LPC_Types_Public_Types
+ * @{
+ */
+
+/** SMA type for character type */
+typedef char CHAR;
+
+/** SMA type for 8 bit unsigned value */
+typedef uint8_t UNS_8;
+
+/** SMA type for 8 bit signed value */
+typedef int8_t INT_8;
+
+/** SMA type for 16 bit unsigned value */
+typedef uint16_t UNS_16;
+
+/** SMA type for 16 bit signed value */
+typedef int16_t INT_16;
+
+/** SMA type for 32 bit unsigned value */
+typedef uint32_t UNS_32;
+
+/** SMA type for 32 bit signed value */
+typedef int32_t INT_32;
+
+/** SMA type for 64 bit signed value */
+typedef int64_t INT_64;
+
+/** SMA type for 64 bit unsigned value */
+typedef uint64_t UNS_64;
+
+/** 32 bit boolean type */
+typedef Bool BOOL_32;
+
+/** 16 bit boolean type */
+typedef Bool BOOL_16;
+
+/** 8 bit boolean type */
+typedef Bool BOOL_8;
+
+/**
+ * @}
+ */
+
+
+#endif /* LPC_TYPES_H */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/lpc17xx_clkpwr.c Mon Jun 16 15:36:29 2014 +0000
@@ -0,0 +1,338 @@
+/***********************************************************************//**
+ * @file lpc17xx_clkpwr.c
+ * @brief Contains all functions support for Clock and Power Control
+ * firmware library on LPC17xx
+ * @version 3.0
+ * @date 18. June. 2010
+ * @author NXP MCU SW Application Team
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **********************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @addtogroup CLKPWR
+ * @{
+ */
+
+/* Includes ------------------------------------------------------------------- */
+#include "lpc17xx_clkpwr.h"
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @addtogroup CLKPWR_Public_Functions
+ * @{
+ */
+
+/*********************************************************************//**
+ * @brief Set value of each Peripheral Clock Selection
+ * @param[in] ClkType Peripheral Clock Selection of each type,
+ * should be one of the following:
+ * - CLKPWR_PCLKSEL_WDT : WDT
+ - CLKPWR_PCLKSEL_TIMER0 : Timer 0
+ - CLKPWR_PCLKSEL_TIMER1 : Timer 1
+ - CLKPWR_PCLKSEL_UART0 : UART 0
+ - CLKPWR_PCLKSEL_UART1 : UART 1
+ - CLKPWR_PCLKSEL_PWM1 : PWM 1
+ - CLKPWR_PCLKSEL_I2C0 : I2C 0
+ - CLKPWR_PCLKSEL_SPI : SPI
+ - CLKPWR_PCLKSEL_SSP1 : SSP 1
+ - CLKPWR_PCLKSEL_DAC : DAC
+ - CLKPWR_PCLKSEL_ADC : ADC
+ - CLKPWR_PCLKSEL_CAN1 : CAN 1
+ - CLKPWR_PCLKSEL_CAN2 : CAN 2
+ - CLKPWR_PCLKSEL_ACF : ACF
+ - CLKPWR_PCLKSEL_QEI : QEI
+ - CLKPWR_PCLKSEL_PCB : PCB
+ - CLKPWR_PCLKSEL_I2C1 : I2C 1
+ - CLKPWR_PCLKSEL_SSP0 : SSP 0
+ - CLKPWR_PCLKSEL_TIMER2 : Timer 2
+ - CLKPWR_PCLKSEL_TIMER3 : Timer 3
+ - CLKPWR_PCLKSEL_UART2 : UART 2
+ - CLKPWR_PCLKSEL_UART3 : UART 3
+ - CLKPWR_PCLKSEL_I2C2 : I2C 2
+ - CLKPWR_PCLKSEL_I2S : I2S
+ - CLKPWR_PCLKSEL_RIT : RIT
+ - CLKPWR_PCLKSEL_SYSCON : SYSCON
+ - CLKPWR_PCLKSEL_MC : MC
+
+ * @param[in] DivVal Value of divider, should be:
+ * - CLKPWR_PCLKSEL_CCLK_DIV_4 : PCLK_peripheral = CCLK/4
+ * - CLKPWR_PCLKSEL_CCLK_DIV_1 : PCLK_peripheral = CCLK/1
+ * - CLKPWR_PCLKSEL_CCLK_DIV_2 : PCLK_peripheral = CCLK/2
+ *
+ * @return none
+ **********************************************************************/
+ void CLKPWR_SetPCLKDiv (uint32_t ClkType, uint32_t DivVal)
+{
+ uint32_t bitpos;
+
+ bitpos = (ClkType < 32) ? (ClkType) : (ClkType - 32);
+
+ /* PCLKSEL0 selected */
+ if (ClkType < 32)
+ {
+ /* Clear two bit at bit position */
+ LPC_SC->PCLKSEL0 &= (~(CLKPWR_PCLKSEL_BITMASK(bitpos)));
+
+ /* Set two selected bit */
+ LPC_SC->PCLKSEL0 |= (CLKPWR_PCLKSEL_SET(bitpos, DivVal));
+ }
+ /* PCLKSEL1 selected */
+ else
+ {
+ /* Clear two bit at bit position */
+ LPC_SC->PCLKSEL1 &= ~(CLKPWR_PCLKSEL_BITMASK(bitpos));
+
+ /* Set two selected bit */
+ LPC_SC->PCLKSEL1 |= (CLKPWR_PCLKSEL_SET(bitpos, DivVal));
+ }
+}
+
+
+/*********************************************************************//**
+ * @brief Get current value of each Peripheral Clock Selection
+ * @param[in] ClkType Peripheral Clock Selection of each type,
+ * should be one of the following:
+ * - CLKPWR_PCLKSEL_WDT : WDT
+ - CLKPWR_PCLKSEL_TIMER0 : Timer 0
+ - CLKPWR_PCLKSEL_TIMER1 : Timer 1
+ - CLKPWR_PCLKSEL_UART0 : UART 0
+ - CLKPWR_PCLKSEL_UART1 : UART 1
+ - CLKPWR_PCLKSEL_PWM1 : PWM 1
+ - CLKPWR_PCLKSEL_I2C0 : I2C 0
+ - CLKPWR_PCLKSEL_SPI : SPI
+ - CLKPWR_PCLKSEL_SSP1 : SSP 1
+ - CLKPWR_PCLKSEL_DAC : DAC
+ - CLKPWR_PCLKSEL_ADC : ADC
+ - CLKPWR_PCLKSEL_CAN1 : CAN 1
+ - CLKPWR_PCLKSEL_CAN2 : CAN 2
+ - CLKPWR_PCLKSEL_ACF : ACF
+ - CLKPWR_PCLKSEL_QEI : QEI
+ - CLKPWR_PCLKSEL_PCB : PCB
+ - CLKPWR_PCLKSEL_I2C1 : I2C 1
+ - CLKPWR_PCLKSEL_SSP0 : SSP 0
+ - CLKPWR_PCLKSEL_TIMER2 : Timer 2
+ - CLKPWR_PCLKSEL_TIMER3 : Timer 3
+ - CLKPWR_PCLKSEL_UART2 : UART 2
+ - CLKPWR_PCLKSEL_UART3 : UART 3
+ - CLKPWR_PCLKSEL_I2C2 : I2C 2
+ - CLKPWR_PCLKSEL_I2S : I2S
+ - CLKPWR_PCLKSEL_RIT : RIT
+ - CLKPWR_PCLKSEL_SYSCON : SYSCON
+ - CLKPWR_PCLKSEL_MC : MC
+
+ * @return Value of Selected Peripheral Clock Selection
+ **********************************************************************/
+ uint32_t CLKPWR_GetPCLKSEL (uint32_t ClkType)
+{
+ uint32_t bitpos, retval;
+
+ if (ClkType < 32)
+ {
+ bitpos = ClkType;
+ retval = LPC_SC->PCLKSEL0;
+ }
+ else
+ {
+ bitpos = ClkType - 32;
+ retval = LPC_SC->PCLKSEL1;
+ }
+
+ retval = CLKPWR_PCLKSEL_GET(bitpos, retval);
+ return retval;
+}
+
+
+
+/*********************************************************************//**
+ * @brief Get current value of each Peripheral Clock
+ * @param[in] ClkType Peripheral Clock Selection of each type,
+ * should be one of the following:
+ * - CLKPWR_PCLKSEL_WDT : WDT
+ - CLKPWR_PCLKSEL_TIMER0 : Timer 0
+ - CLKPWR_PCLKSEL_TIMER1 : Timer 1
+ - CLKPWR_PCLKSEL_UART0 : UART 0
+ - CLKPWR_PCLKSEL_UART1 : UART 1
+ - CLKPWR_PCLKSEL_PWM1 : PWM 1
+ - CLKPWR_PCLKSEL_I2C0 : I2C 0
+ - CLKPWR_PCLKSEL_SPI : SPI
+ - CLKPWR_PCLKSEL_SSP1 : SSP 1
+ - CLKPWR_PCLKSEL_DAC : DAC
+ - CLKPWR_PCLKSEL_ADC : ADC
+ - CLKPWR_PCLKSEL_CAN1 : CAN 1
+ - CLKPWR_PCLKSEL_CAN2 : CAN 2
+ - CLKPWR_PCLKSEL_ACF : ACF
+ - CLKPWR_PCLKSEL_QEI : QEI
+ - CLKPWR_PCLKSEL_PCB : PCB
+ - CLKPWR_PCLKSEL_I2C1 : I2C 1
+ - CLKPWR_PCLKSEL_SSP0 : SSP 0
+ - CLKPWR_PCLKSEL_TIMER2 : Timer 2
+ - CLKPWR_PCLKSEL_TIMER3 : Timer 3
+ - CLKPWR_PCLKSEL_UART2 : UART 2
+ - CLKPWR_PCLKSEL_UART3 : UART 3
+ - CLKPWR_PCLKSEL_I2C2 : I2C 2
+ - CLKPWR_PCLKSEL_I2S : I2S
+ - CLKPWR_PCLKSEL_RIT : RIT
+ - CLKPWR_PCLKSEL_SYSCON : SYSCON
+ - CLKPWR_PCLKSEL_MC : MC
+
+ * @return Value of Selected Peripheral Clock
+ **********************************************************************/
+ uint32_t CLKPWR_GetPCLK (uint32_t ClkType)
+{
+ uint32_t retval, div;
+
+ retval = SystemCoreClock;
+ div = CLKPWR_GetPCLKSEL(ClkType);
+
+ switch (div)
+ {
+ case 0:
+ div = 4;
+ break;
+
+ case 1:
+ div = 1;
+ break;
+
+ case 2:
+ div = 2;
+ break;
+
+ case 3:
+ div = 8;
+ break;
+ }
+ retval /= div;
+
+ return retval;
+}
+
+
+
+/*********************************************************************//**
+ * @brief Configure power supply for each peripheral according to NewState
+ * @param[in] PPType Type of peripheral used to enable power,
+ * should be one of the following:
+ * - CLKPWR_PCONP_PCTIM0 : Timer 0
+ - CLKPWR_PCONP_PCTIM1 : Timer 1
+ - CLKPWR_PCONP_PCUART0 : UART 0
+ - CLKPWR_PCONP_PCUART1 : UART 1
+ - CLKPWR_PCONP_PCPWM1 : PWM 1
+ - CLKPWR_PCONP_PCI2C0 : I2C 0
+ - CLKPWR_PCONP_PCSPI : SPI
+ - CLKPWR_PCONP_PCRTC : RTC
+ - CLKPWR_PCONP_PCSSP1 : SSP 1
+ - CLKPWR_PCONP_PCAD : ADC
+ - CLKPWR_PCONP_PCAN1 : CAN 1
+ - CLKPWR_PCONP_PCAN2 : CAN 2
+ - CLKPWR_PCONP_PCGPIO : GPIO
+ - CLKPWR_PCONP_PCRIT : RIT
+ - CLKPWR_PCONP_PCMC : MC
+ - CLKPWR_PCONP_PCQEI : QEI
+ - CLKPWR_PCONP_PCI2C1 : I2C 1
+ - CLKPWR_PCONP_PCSSP0 : SSP 0
+ - CLKPWR_PCONP_PCTIM2 : Timer 2
+ - CLKPWR_PCONP_PCTIM3 : Timer 3
+ - CLKPWR_PCONP_PCUART2 : UART 2
+ - CLKPWR_PCONP_PCUART3 : UART 3
+ - CLKPWR_PCONP_PCI2C2 : I2C 2
+ - CLKPWR_PCONP_PCI2S : I2S
+ - CLKPWR_PCONP_PCGPDMA : GPDMA
+ - CLKPWR_PCONP_PCENET : Ethernet
+ - CLKPWR_PCONP_PCUSB : USB
+ *
+ * @param[in] NewState New state of Peripheral Power, should be:
+ * - ENABLE : Enable power for this peripheral
+ * - DISABLE : Disable power for this peripheral
+ *
+ * @return none
+ **********************************************************************/
+ void CLKPWR_ConfigPPWR (uint32_t PPType, FunctionalState NewState)
+{
+ if (NewState == ENABLE)
+ {
+ LPC_SC->PCONP |= PPType & CLKPWR_PCONP_BITMASK;
+ }
+ else if (NewState == DISABLE)
+ {
+ LPC_SC->PCONP &= (~PPType) & CLKPWR_PCONP_BITMASK;
+ }
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Sleep mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+ void CLKPWR_Sleep(void)
+{
+ LPC_SC->PCON = 0x00;
+ /* Sleep Mode*/
+ __WFI();
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Deep Sleep mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+ void CLKPWR_DeepSleep(void)
+{
+ /* Deep-Sleep Mode, set SLEEPDEEP bit */
+ SCB->SCR = 0x4;
+ LPC_SC->PCON = 0x8;
+ /* Deep Sleep Mode*/
+ __WFI();
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Power Down mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+ void CLKPWR_PowerDown(void)
+{
+ /* Deep-Sleep Mode, set SLEEPDEEP bit */
+ SCB->SCR = 0x4;
+ LPC_SC->PCON = 0x09;
+ /* Power Down Mode*/
+ __WFI();
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Deep Power Down mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+ void CLKPWR_DeepPowerDown(void)
+{
+ /* Deep-Sleep Mode, set SLEEPDEEP bit */
+ SCB->SCR = 0x4;
+ LPC_SC->PCON = 0x03;
+ /* Deep Power Down Mode*/
+ __WFI();
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */