Bose Automation
modes
Fork of
mbed-rtos
by 
mbed official
Embed:
(wiki syntax)
PINSEL_CFG_Type Struct Reference
[PINSEL_Public_Types]
Pin configuration structure. More...
#include <lpc17xx_pinsel.h>
Data Fields | |
| uint8_t | Portnum |
| Port Number, should be PINSEL_PORT_x, where x should be in range from 0 to 4. | |
| uint8_t | Pinnum |
| Pin Number, should be PINSEL_PIN_x, where x should be in range from 0 to 31. | |
| uint8_t | Funcnum |
| Function Number, should be PINSEL_FUNC_x, where x should be in range from 0 to 3. | |
| uint8_t | Pinmode |
Pin Mode, should be:
| |
| uint8_t | OpenDrain |
OpenDrain mode, should be:
| |
Detailed Description
Pin configuration structure.
Definition at line 160 of file lpc17xx_pinsel.h.
Field Documentation
| uint8_t Funcnum |
Function Number, should be PINSEL_FUNC_x, where x should be in range from 0 to 3.
Definition at line 166 of file lpc17xx_pinsel.h.
| uint8_t OpenDrain |
OpenDrain mode, should be:
- PINSEL_PINMODE_NORMAL: Pin is in the normal (not open drain) mode
- PINSEL_PINMODE_OPENDRAIN: Pin is in the open drain mode.
Definition at line 172 of file lpc17xx_pinsel.h.
| uint8_t Pinmode |
Pin Mode, should be:
- PINSEL_PINMODE_PULLUP: Internal pull-up resistor
- PINSEL_PINMODE_TRISTATE: Tri-state
- PINSEL_PINMODE_PULLDOWN: Internal pull-down resistor.
Definition at line 168 of file lpc17xx_pinsel.h.
| uint8_t Pinnum |
Pin Number, should be PINSEL_PIN_x, where x should be in range from 0 to 31.
Definition at line 164 of file lpc17xx_pinsel.h.
| uint8_t Portnum |
Port Number, should be PINSEL_PORT_x, where x should be in range from 0 to 4.
Definition at line 162 of file lpc17xx_pinsel.h.
Generated on Wed Jul 13 2022 02:56:19 by
1.7.2