File content as of revision 42:bdb6f132a609:

#include "mbed.h"
#include "button.h"
#include "emic2.h"

//emic2 myTTS(p28, p27); //serial RX,TX pins to emic
DigitalOut led4(LED4);
DigitalOut led3(LED3);
DigitalOut led2(LED2);

// button constructor
button::button(PwmOut servo, DigitalIn pb, int id)
    : servo(servo), pb(pb), state(0), press(0), id(id), type(0) {}
    
// FUNCTIONS

int button::getPress()
{
    //pc.printf("%d", press);
    return press;
}


// move servo into the slot
void button::moveServoIn()
{
    //myled = 1;
    // rotate 90 degrees one way
    for(int i=4; i<=7; i++) {
        servo = i/100.0;
        wait(0.01);
    }
    //press = 1;
    switch (id) {
        case 1:
            led2 = 0;
            led3 = 0;
            led4 = 1;
            break;
        case 2:
            led2 = 0;
            led3 = 1;
            led4 = 0;
            break;
        case 3:
            led2 = 0;
            led3 = 1;
            led4 = 1;
            break;
        case 4:
            led2 = 1;
            led3 = 0;
            led4 = 0;
            break;
        case 5:
            led2 = 1;
            led3 = 0;
            led4 = 1;
            break;
        case 6:
            led2 = 1;
            led3 = 1;
            led4 = 0;
            break;
    }
}

// move servo out of the slot
void button::moveServoOut()
{
    //myled = 0;
    for(int i=7; i>4; i--) {
        servo = i/100.0;
        wait(0.01);
    }
    led2 = 0;
    led3 = 0;
    led4 = 0;
}

// get servo pin
void button::setMode(int mymode)
{
    type = mymode;
}

int button::updateState()
{    if (type == 0) {
        //myled = 0;
        // state 0 - button is up, pb = 0
        if (pb == 0 && state == 3) {
            // nothing happens here, servo is still
            state = 0;
        }
        // state 1 - button is moving down, pb = 1
        if (pb == 1 && state == 0) {
            moveServoIn();
            state = 1;
            press = 1;
        }
        // state 2 - button is down, pb = 0
        if (pb == 0 && state == 1) {
            // nothing happens here, servo is still
            state = 2;
        }
        // state 3 - button is moving up, pb = 1
        if (pb == 1 && state == 2) {
            moveServoOut();
            state = 3;
            press = 0;
        }
    } else {
        state = pb;
        press = pb;
    }
    return state;
}

void button::setup() {
    for(int i=0; i<=4; i++) {
        servo = i/100.0;
        wait(0.01);
    }
}