Azoteq IQS624 Serial Terminal Display Class
Dependents: IQS624_HelloWorld Nucleo_ACM1602_I2C_DC_Angle
Library: IQSDisplayTerminal
Library for formatted display of IQS624 registers on a serial terminal
Screen Capture
Below is a screen capture of formatted output on a serial terminal program.
Note that over a million frames were captured with zero I2C errors.
IQS624 Summary
Ultra low power I2C sensor for 2D Magnetic Angle, Capacitive touch and Inductive Proximity
IQS624 mbed Component Link
IQS624 Pinout
IQS624 Connected to mbed LPC1768 board. The five wires are power(2), I2C(2) and RDY(1).
IQS624 Data Sheet
Azoteq IQS624 Data sheet & Evaluation Kit Information: http://bit.ly/IQS624_ds
IQS624 YouTube Link
IQS624 1-minute YouTube video: http://bit.ly/IQS624Video
Diff: IQSdisplayTerminal.cpp
- Revision:
- 12:75f1d9e5bf01
- Parent:
- 11:5200ac4ee76e
- Child:
- 13:e5cbff2da2e7
diff -r 5200ac4ee76e -r 75f1d9e5bf01 IQSdisplayTerminal.cpp --- a/IQSdisplayTerminal.cpp Sun May 14 16:23:25 2017 +0000 +++ b/IQSdisplayTerminal.cpp Sun May 14 19:56:28 2017 +0000 @@ -15,19 +15,20 @@ IQS62xDisplay::IQS62xDisplay() : Serial(USBTX,USBRX) // use mbed default serial port #endif -{ +{ frameCounter=0; baud(DISPLAY_BAUD_RATE); -} +} #if defined(TARGET_TEENSY3_1) || defined (TARGET_TEENSY3_2) || IQS_USE_USBSERIAL -void IQS62xDisplay::baud(int baudRate){} +void IQS62xDisplay::baud(int baudRate) {} #endif // display a startup message to serial port -void IQS62xDisplay::helloMessage(bool waitForUser) { +void IQS62xDisplay::helloMessage(bool waitForUser) +{ puts("\x1b[2J \x1b[?25l \x1b[H"); // ANSII/VT100 codes to clear screen, invisible cursor, home cursor - printf(" IQS624 Register Display\r\n\r\n"); + printf(" IQS624 Register Display\r\n\r\n"); printf("To get a smooth screen refresh effect, use a terminal program that supports ANSI/VT100 escape codes such as Tera Term.\r\n\r\n"); printf("Handy hint - In many terminal programs, Alt-B (break) will reset your Nucleo Board.\r\n\r\n"); printf("Press any key to continue...\r\n"); @@ -36,42 +37,45 @@ } // show headings and I2C error count -void IQS62xDisplay::showStatus(int I2Cspeed, int I2CErrorCount) { +void IQS62xDisplay::showStatus(int I2Cspeed, int I2CErrorCount) +{ frameCounter++; puts("\x1b[H"); // ANSI/VT100 command for cursor home - printf("\t\t"); + printf("\t\t"); printf("\t IQS624 Register Display\r\n\r\n"); // heading printf("\t Frame number %06d", frameCounter); printf("\t I2C Speed %dk", I2Cspeed/1000); printf("\t I2C Errors %d", I2CErrorCount); } -// dump one line of text from the buffer with VT100 color formatting -void IQS62xDisplay::showLine(char * buffer, char * color, int startbyte, int endbyte) { - for (int i=startbyte; i<=endbyte; i++) { +// dump one line of text from the buffer with VT100 color formatting +void IQS62xDisplay::showLine(char * buffer, char * color, int startbyte, int endbyte) +{ + for (int i=startbyte; i<=endbyte; i++) { if ( color == NULL || color[i] == 0 ) - printf("%02x ", buffer[i]); + printf("%02x ", buffer[i]); else - #define USE_IQS_COLOR_DISPLAY - #ifndef DONT_USE_IQS_COLOR_DISPLAY - printf("\x1b[32m%02x\x1b[30m ", buffer[i]); // print out in green (ANSI VT100 code) - #else - printf("%02x ", buffer[i]); // print out in black & white - #endif - } - } +#define USE_IQS_COLOR_DISPLAY +#ifndef DONT_USE_IQS_COLOR_DISPLAY + printf("\x1b[32m%02x\x1b[30m ", buffer[i]); // print out in green (ANSI VT100 code) +#else + printf("%02x ", buffer[i]); // print out in black & white +#endif + } +} // formatted hex display of IQS62x registers -void IQS62xDisplay::showRegisters(char * buffer, char* color, bool debug) { - bool d = debug; // if this is true we always display all 16 values in the line - printf("\r\n\r\n Device ID (43) [00] "); showLine(buffer,color,0x00,d?0x0f:0x02); - printf("\r\n\r\n System Flags [10] "); showLine(buffer,color,0x10,d?0x1f:0x15); - printf("\r\n\r\n Raw Channels 0-5 [20] "); showLine(buffer,color,0x20,d?0x2f:0x2b); - printf("\r\n\r\n Averages [30] "); showLine(buffer,color,0x30,d?0x3f:0x33); - printf("\r\n\r\n Touch Setup [40] "); showLine(buffer,color,0x40,d?0x4f:0x49); - printf("\r\n\r\n Touch Thresholds [50] "); showLine(buffer,color,0x50,d?0x5f:0x54); - printf("\r\n\r\n Hall Settings [70] "); showLine(buffer,color,0x70,d?0x7f:0x7a); - printf("\r\n\r\n Wheel Outputs [80] "); showLine(buffer,color,0x80,d?0x8f:0x8f); - printf("\r\n\r\n System Setup [d0] "); showLine(buffer,color,0xd0,d?0xdf:0xd6); +void IQS62xDisplay::showRegisters(char * buffer, char* color, bool showAllRegisters) +{ + bool d = showAllRegisters; // if true show all 16 registers per line + printf("\r\n\r\n Device ID (43) [00] "); showLine(buffer,color,0x00,d?0x0f:0x02); + printf("\r\n\r\n System Flags [10] "); showLine(buffer,color,0x10,d?0x1f:0x15); + printf("\r\n\r\n Raw Channels 0-5 [20] "); showLine(buffer,color,0x20,d?0x2f:0x2b); + printf("\r\n\r\n Averages [30] "); showLine(buffer,color,0x30,d?0x3f:0x33); + printf("\r\n\r\n Touch Setup [40] "); showLine(buffer,color,0x40,d?0x4f:0x49); + printf("\r\n\r\n Touch Thresholds [50] "); showLine(buffer,color,0x50,d?0x5f:0x54); + printf("\r\n\r\n Hall Settings [70] "); showLine(buffer,color,0x70,d?0x7f:0x7a); + printf("\r\n\r\n Wheel Outputs [80] "); showLine(buffer,color,0x80,d?0x8f:0x8f); + printf("\r\n\r\n System Setup [d0] "); showLine(buffer,color,0xd0,d?0xdf:0xd6); printf("\r\n\r\n"); } \ No newline at end of file