mbed-os-example-blinky

Mini how-to "mbed-os-example-blinky"

You can compile the project using mbed compiler online or locally on your PC.

MBED Compiler on-line

The following steps will show you how to compile the project via browser:

1. Go to the Sensor Node page.

2. Click on the + Add to your Mbed Compiler button.

/media/uploads/rspelta/compiler.jpg

3. From the mbed-os-example-blinky page click on the Import into the Compiler button.

/media/uploads/rspelta/import_compiler.jpg

4. From the following form import the project:

/media/uploads/rspelta/import_program.jpg

5. Once imported check if you selected the right platform, on the right of the screen you should have this:

/media/uploads/rspelta/select_platform.jpg

If there is another platform please click on it and select the Avnet Silica ST Sensor

6. Now you are able to compile the project just clicking on compile button:

/media/uploads/rspelta/compile_project.jpg

7. After the compilation you will download automatically the firmware

/media/uploads/rspelta/save_file.jpg

8. Copy the binary file mbed-os-example-blinky.bin into the mass-storage TilePlus of the SensorNode board.

MBED Cli

The following steps will show you how to compile the project on your PC:

1. Clone this repository with the command:

$ mbed import https://os.mbed.com/teams/Avnet-Silica/code/mbed-os-example-blinky/

Information

The cloning process requires few minutes.

2. Enter in the directory and compile the project:

$ cd mbed-os-example-blinky
$ mbed compile -m SILICA_SENSOR_NODE -t GCC_ARM

3. Once compiled copy the binary file mbed-os-example-blinky.bin into the mass-storage TilePlus of the SensorNode board.

Information

You will find the mbed-os-example-blinky.bin file at:
"mbed-os-example-blinky\BUILD\SILICA_SENSOR_NODE\GCC_ARM" directory.

Warning

Please close with jumpers the following pins marked as yellow in order to power supply the board via micro-usb cable.

/media/uploads/rspelta/board-jumpers.png

In the red rectangles, with this configuration is not important if you have connected the battery and if the switch is closed or open.

Revision:
0:2272bce2eee5
diff -r 000000000000 -r 2272bce2eee5 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Oct 02 11:04:53 2017 +0200
@@ -0,0 +1,12 @@
+#include "mbed.h"
+
+DigitalOut led1(LED1);
+
+// main() runs in its own thread in the OS
+int main() {
+    while (true) {
+        led1 = !led1;
+        wait(0.5);
+    }
+}
+