Repostiory containing DAPLink source code with Reset Pin workaround for HANI_IOT board.
Upstream: https://github.com/ARMmbed/DAPLink
Diff: source/hic_hal/atmel/sam3u2c/component/udphs.h
- Revision:
- 0:01f31e923fe2
diff -r 000000000000 -r 01f31e923fe2 source/hic_hal/atmel/sam3u2c/component/udphs.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/hic_hal/atmel/sam3u2c/component/udphs.h Tue Apr 07 12:55:42 2020 +0200 @@ -0,0 +1,337 @@ +/* ---------------------------------------------------------------------------- */ +/* Atmel Microcontroller Software Support */ +/* SAM Software Package License */ +/* ---------------------------------------------------------------------------- */ +/* Copyright (c) %copyright_year%, Atmel Corporation */ +/* */ +/* All rights reserved. */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following condition is met: */ +/* */ +/* - Redistributions of source code must retain the above copyright notice, */ +/* this list of conditions and the disclaimer below. */ +/* */ +/* Atmel's name may not be used to endorse or promote products derived from */ +/* this software without specific prior written permission. */ +/* */ +/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ +/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ +/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ +/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ +/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ +/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ +/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ +/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ +/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ +/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* ---------------------------------------------------------------------------- */ + +#ifndef _SAM3U_UDPHS_COMPONENT_ +#define _SAM3U_UDPHS_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR USB High Speed Device Port */ +/* ============================================================================= */ +/** \addtogroup SAM3U_UDPHS USB High Speed Device Port */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief UdphsDma hardware registers */ +typedef struct { + RwReg UDPHS_DMANXTDSC; /**< \brief (UdphsDma Offset: 0x0) UDPHS DMA Next Descriptor Address Register */ + RwReg UDPHS_DMAADDRESS; /**< \brief (UdphsDma Offset: 0x4) UDPHS DMA Channel Address Register */ + RwReg UDPHS_DMACONTROL; /**< \brief (UdphsDma Offset: 0x8) UDPHS DMA Channel Control Register */ + RwReg UDPHS_DMASTATUS; /**< \brief (UdphsDma Offset: 0xC) UDPHS DMA Channel Status Register */ +} UdphsDma; +/** \brief UdphsEpt hardware registers */ +typedef struct { + RwReg UDPHS_EPTCFG; /**< \brief (UdphsEpt Offset: 0x0) UDPHS Endpoint Configuration Register */ + RwReg UDPHS_EPTCTLENB; /**< \brief (UdphsEpt Offset: 0x4) UDPHS Endpoint Control Enable Register */ + RwReg UDPHS_EPTCTLDIS; /**< \brief (UdphsEpt Offset: 0x8) UDPHS Endpoint Control Disable Register */ + RwReg UDPHS_EPTCTL; /**< \brief (UdphsEpt Offset: 0xC) UDPHS Endpoint Control Register */ + RoReg Reserved1[1]; + RwReg UDPHS_EPTSETSTA; /**< \brief (UdphsEpt Offset: 0x14) UDPHS Endpoint Set Status Register */ + RwReg UDPHS_EPTCLRSTA; /**< \brief (UdphsEpt Offset: 0x18) UDPHS Endpoint Clear Status Register */ + RwReg UDPHS_EPTSTA; /**< \brief (UdphsEpt Offset: 0x1C) UDPHS Endpoint Status Register */ +} UdphsEpt; +/** \brief Udphs hardware registers */ +#define UDPHSEPT_NUMBER 7 +#define UDPHSDMA_NUMBER 6 +typedef struct { + RwReg UDPHS_CTRL; /**< \brief (Udphs Offset: 0x00) UDPHS Control Register */ + RoReg UDPHS_FNUM; /**< \brief (Udphs Offset: 0x04) UDPHS Frame Number Register */ + RoReg Reserved1[2]; + RwReg UDPHS_IEN; /**< \brief (Udphs Offset: 0x10) UDPHS Interrupt Enable Register */ + RoReg UDPHS_INTSTA; /**< \brief (Udphs Offset: 0x14) UDPHS Interrupt Status Register */ + WoReg UDPHS_CLRINT; /**< \brief (Udphs Offset: 0x18) UDPHS Clear Interrupt Register */ + WoReg UDPHS_EPTRST; /**< \brief (Udphs Offset: 0x1C) UDPHS Endpoints Reset Register */ + RoReg Reserved2[48]; + RwReg UDPHS_TST; /**< \brief (Udphs Offset: 0xE0) UDPHS Test Register */ + RoReg Reserved3[7]; + UdphsEpt UDPHS_EPT[UDPHSEPT_NUMBER]; /**< \brief (Udphs Offset: 0x100) endpoint = 0 .. 6 */ + RoReg Reserved4[72]; + UdphsDma UDPHS_DMA[UDPHSDMA_NUMBER]; /**< \brief (Udphs Offset: 0x300) channel = 0 .. 5 */ +} Udphs; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- UDPHS_CTRL : (UDPHS Offset: 0x00) UDPHS Control Register -------- */ +#define UDPHS_CTRL_DEV_ADDR_Pos 0 +#define UDPHS_CTRL_DEV_ADDR_Msk (0x7fu << UDPHS_CTRL_DEV_ADDR_Pos) /**< \brief (UDPHS_CTRL) UDPHS Address */ +#define UDPHS_CTRL_DEV_ADDR(value) ((UDPHS_CTRL_DEV_ADDR_Msk & ((value) << UDPHS_CTRL_DEV_ADDR_Pos))) +#define UDPHS_CTRL_FADDR_EN (0x1u << 7) /**< \brief (UDPHS_CTRL) Function Address Enable */ +#define UDPHS_CTRL_EN_UDPHS (0x1u << 8) /**< \brief (UDPHS_CTRL) UDPHS Enable */ +#define UDPHS_CTRL_DETACH (0x1u << 9) /**< \brief (UDPHS_CTRL) Detach Command */ +#define UDPHS_CTRL_REWAKEUP (0x1u << 10) /**< \brief (UDPHS_CTRL) Send Remote Wake Up */ +#define UDPHS_CTRL_PULLD_DIS (0x1u << 11) /**< \brief (UDPHS_CTRL) Pull-Down Disable */ +/* -------- UDPHS_FNUM : (UDPHS Offset: 0x04) UDPHS Frame Number Register -------- */ +#define UDPHS_FNUM_MICRO_FRAME_NUM_Pos 0 +#define UDPHS_FNUM_MICRO_FRAME_NUM_Msk (0x7u << UDPHS_FNUM_MICRO_FRAME_NUM_Pos) /**< \brief (UDPHS_FNUM) Microframe Number */ +#define UDPHS_FNUM_FRAME_NUMBER_Pos 3 +#define UDPHS_FNUM_FRAME_NUMBER_Msk (0x7ffu << UDPHS_FNUM_FRAME_NUMBER_Pos) /**< \brief (UDPHS_FNUM) Frame Number as defined in the Packet Field Formats */ +#define UDPHS_FNUM_FNUM_ERR (0x1u << 31) /**< \brief (UDPHS_FNUM) Frame Number CRC Error */ +/* -------- UDPHS_IEN : (UDPHS Offset: 0x10) UDPHS Interrupt Enable Register -------- */ +#define UDPHS_IEN_DET_SUSPD (0x1u << 1) /**< \brief (UDPHS_IEN) Suspend Interrupt Enable */ +#define UDPHS_IEN_MICRO_SOF (0x1u << 2) /**< \brief (UDPHS_IEN) Micro-SOF Interrupt Enable */ +#define UDPHS_IEN_INT_SOF (0x1u << 3) /**< \brief (UDPHS_IEN) SOF Interrupt Enable */ +#define UDPHS_IEN_ENDRESET (0x1u << 4) /**< \brief (UDPHS_IEN) End Of Reset Interrupt Enable */ +#define UDPHS_IEN_WAKE_UP (0x1u << 5) /**< \brief (UDPHS_IEN) Wake Up CPU Interrupt Enable */ +#define UDPHS_IEN_ENDOFRSM (0x1u << 6) /**< \brief (UDPHS_IEN) End Of Resume Interrupt Enable */ +#define UDPHS_IEN_UPSTR_RES (0x1u << 7) /**< \brief (UDPHS_IEN) Upstream Resume Interrupt Enable */ +#define UDPHS_IEN_EPT_0 (0x1u << 8) /**< \brief (UDPHS_IEN) Endpoint 0 Interrupt Enable */ +#define UDPHS_IEN_EPT_1 (0x1u << 9) /**< \brief (UDPHS_IEN) Endpoint 1 Interrupt Enable */ +#define UDPHS_IEN_EPT_2 (0x1u << 10) /**< \brief (UDPHS_IEN) Endpoint 2 Interrupt Enable */ +#define UDPHS_IEN_EPT_3 (0x1u << 11) /**< \brief (UDPHS_IEN) Endpoint 3 Interrupt Enable */ +#define UDPHS_IEN_EPT_4 (0x1u << 12) /**< \brief (UDPHS_IEN) Endpoint 4 Interrupt Enable */ +#define UDPHS_IEN_EPT_5 (0x1u << 13) /**< \brief (UDPHS_IEN) Endpoint 5 Interrupt Enable */ +#define UDPHS_IEN_EPT_6 (0x1u << 14) /**< \brief (UDPHS_IEN) Endpoint 6 Interrupt Enable */ +#define UDPHS_IEN_DMA_1 (0x1u << 25) /**< \brief (UDPHS_IEN) DMA Channel 1 Interrupt Enable */ +#define UDPHS_IEN_DMA_2 (0x1u << 26) /**< \brief (UDPHS_IEN) DMA Channel 2 Interrupt Enable */ +#define UDPHS_IEN_DMA_3 (0x1u << 27) /**< \brief (UDPHS_IEN) DMA Channel 3 Interrupt Enable */ +#define UDPHS_IEN_DMA_4 (0x1u << 28) /**< \brief (UDPHS_IEN) DMA Channel 4 Interrupt Enable */ +#define UDPHS_IEN_DMA_5 (0x1u << 29) /**< \brief (UDPHS_IEN) DMA Channel 5 Interrupt Enable */ +#define UDPHS_IEN_DMA_6 (0x1u << 30) /**< \brief (UDPHS_IEN) DMA Channel 6 Interrupt Enable */ +/* -------- UDPHS_INTSTA : (UDPHS Offset: 0x14) UDPHS Interrupt Status Register -------- */ +#define UDPHS_INTSTA_SPEED (0x1u << 0) /**< \brief (UDPHS_INTSTA) Speed Status */ +#define UDPHS_INTSTA_DET_SUSPD (0x1u << 1) /**< \brief (UDPHS_INTSTA) Suspend Interrupt */ +#define UDPHS_INTSTA_MICRO_SOF (0x1u << 2) /**< \brief (UDPHS_INTSTA) Micro Start Of Frame Interrupt */ +#define UDPHS_INTSTA_INT_SOF (0x1u << 3) /**< \brief (UDPHS_INTSTA) Start Of Frame Interrupt */ +#define UDPHS_INTSTA_ENDRESET (0x1u << 4) /**< \brief (UDPHS_INTSTA) End Of Reset Interrupt */ +#define UDPHS_INTSTA_WAKE_UP (0x1u << 5) /**< \brief (UDPHS_INTSTA) Wake Up CPU Interrupt */ +#define UDPHS_INTSTA_ENDOFRSM (0x1u << 6) /**< \brief (UDPHS_INTSTA) End Of Resume Interrupt */ +#define UDPHS_INTSTA_UPSTR_RES (0x1u << 7) /**< \brief (UDPHS_INTSTA) Upstream Resume Interrupt */ +#define UDPHS_INTSTA_EPT_0 (0x1u << 8) /**< \brief (UDPHS_INTSTA) Endpoint 0 Interrupt */ +#define UDPHS_INTSTA_EPT_1 (0x1u << 9) /**< \brief (UDPHS_INTSTA) Endpoint 1 Interrupt */ +#define UDPHS_INTSTA_EPT_2 (0x1u << 10) /**< \brief (UDPHS_INTSTA) Endpoint 2 Interrupt */ +#define UDPHS_INTSTA_EPT_3 (0x1u << 11) /**< \brief (UDPHS_INTSTA) Endpoint 3 Interrupt */ +#define UDPHS_INTSTA_EPT_4 (0x1u << 12) /**< \brief (UDPHS_INTSTA) Endpoint 4 Interrupt */ +#define UDPHS_INTSTA_EPT_5 (0x1u << 13) /**< \brief (UDPHS_INTSTA) Endpoint 5 Interrupt */ +#define UDPHS_INTSTA_EPT_6 (0x1u << 14) /**< \brief (UDPHS_INTSTA) Endpoint 6 Interrupt */ +#define UDPHS_INTSTA_DMA_1 (0x1u << 25) /**< \brief (UDPHS_INTSTA) DMA Channel 1 Interrupt */ +#define UDPHS_INTSTA_DMA_2 (0x1u << 26) /**< \brief (UDPHS_INTSTA) DMA Channel 2 Interrupt */ +#define UDPHS_INTSTA_DMA_3 (0x1u << 27) /**< \brief (UDPHS_INTSTA) DMA Channel 3 Interrupt */ +#define UDPHS_INTSTA_DMA_4 (0x1u << 28) /**< \brief (UDPHS_INTSTA) DMA Channel 4 Interrupt */ +#define UDPHS_INTSTA_DMA_5 (0x1u << 29) /**< \brief (UDPHS_INTSTA) DMA Channel 5 Interrupt */ +#define UDPHS_INTSTA_DMA_6 (0x1u << 30) /**< \brief (UDPHS_INTSTA) DMA Channel 6 Interrupt */ +/* -------- UDPHS_CLRINT : (UDPHS Offset: 0x18) UDPHS Clear Interrupt Register -------- */ +#define UDPHS_CLRINT_DET_SUSPD (0x1u << 1) /**< \brief (UDPHS_CLRINT) Suspend Interrupt Clear */ +#define UDPHS_CLRINT_MICRO_SOF (0x1u << 2) /**< \brief (UDPHS_CLRINT) Micro Start Of Frame Interrupt Clear */ +#define UDPHS_CLRINT_INT_SOF (0x1u << 3) /**< \brief (UDPHS_CLRINT) Start Of Frame Interrupt Clear */ +#define UDPHS_CLRINT_ENDRESET (0x1u << 4) /**< \brief (UDPHS_CLRINT) End Of Reset Interrupt Clear */ +#define UDPHS_CLRINT_WAKE_UP (0x1u << 5) /**< \brief (UDPHS_CLRINT) Wake Up CPU Interrupt Clear */ +#define UDPHS_CLRINT_ENDOFRSM (0x1u << 6) /**< \brief (UDPHS_CLRINT) End Of Resume Interrupt Clear */ +#define UDPHS_CLRINT_UPSTR_RES (0x1u << 7) /**< \brief (UDPHS_CLRINT) Upstream Resume Interrupt Clear */ +/* -------- UDPHS_EPTRST : (UDPHS Offset: 0x1C) UDPHS Endpoints Reset Register -------- */ +#define UDPHS_EPTRST_EPT_0 (0x1u << 0) /**< \brief (UDPHS_EPTRST) Endpoint 0 Reset */ +#define UDPHS_EPTRST_EPT_1 (0x1u << 1) /**< \brief (UDPHS_EPTRST) Endpoint 1 Reset */ +#define UDPHS_EPTRST_EPT_2 (0x1u << 2) /**< \brief (UDPHS_EPTRST) Endpoint 2 Reset */ +#define UDPHS_EPTRST_EPT_3 (0x1u << 3) /**< \brief (UDPHS_EPTRST) Endpoint 3 Reset */ +#define UDPHS_EPTRST_EPT_4 (0x1u << 4) /**< \brief (UDPHS_EPTRST) Endpoint 4 Reset */ +#define UDPHS_EPTRST_EPT_5 (0x1u << 5) /**< \brief (UDPHS_EPTRST) Endpoint 5 Reset */ +#define UDPHS_EPTRST_EPT_6 (0x1u << 6) /**< \brief (UDPHS_EPTRST) Endpoint 6 Reset */ +/* -------- UDPHS_TST : (UDPHS Offset: 0xE0) UDPHS Test Register -------- */ +#define UDPHS_TST_SPEED_CFG_Pos 0 +#define UDPHS_TST_SPEED_CFG_Msk (0x3u << UDPHS_TST_SPEED_CFG_Pos) /**< \brief (UDPHS_TST) Speed Configuration */ +#define UDPHS_TST_SPEED_CFG_NORMAL (0x0u << 0) /**< \brief (UDPHS_TST) Normal Mode: The macro is in Full Speed mode, ready to make a High Speed identification, if the host supports it and then to automatically switch to High Speed mode */ +#define UDPHS_TST_SPEED_CFG_HIGH_SPEED (0x2u << 0) /**< \brief (UDPHS_TST) Force High Speed: Set this value to force the hardware to work in High Speed mode. Only for debug or test purpose. */ +#define UDPHS_TST_SPEED_CFG_FULL_SPEED (0x3u << 0) /**< \brief (UDPHS_TST) Force Full Speed: Set this value to force the hardware to work only in Full Speed mode. In this configuration, the macro will not respond to a High Speed reset handshake. */ +#define UDPHS_TST_TST_J (0x1u << 2) /**< \brief (UDPHS_TST) Test J Mode */ +#define UDPHS_TST_TST_K (0x1u << 3) /**< \brief (UDPHS_TST) Test K Mode */ +#define UDPHS_TST_TST_PKT (0x1u << 4) /**< \brief (UDPHS_TST) Test Packet Mode */ +#define UDPHS_TST_OPMODE2 (0x1u << 5) /**< \brief (UDPHS_TST) OpMode2 */ +/* -------- UDPHS_EPTCFG : (UDPHS Offset: N/A) UDPHS Endpoint Configuration Register -------- */ +#define UDPHS_EPTCFG_EPT_SIZE_Pos 0 +#define UDPHS_EPTCFG_EPT_SIZE_Msk (0x7u << UDPHS_EPTCFG_EPT_SIZE_Pos) /**< \brief (UDPHS_EPTCFG) Endpoint Size */ +#define UDPHS_EPTCFG_EPT_SIZE_8 (0x0u << 0) /**< \brief (UDPHS_EPTCFG) 8 bytes */ +#define UDPHS_EPTCFG_EPT_SIZE_16 (0x1u << 0) /**< \brief (UDPHS_EPTCFG) 16 bytes */ +#define UDPHS_EPTCFG_EPT_SIZE_32 (0x2u << 0) /**< \brief (UDPHS_EPTCFG) 32 bytes */ +#define UDPHS_EPTCFG_EPT_SIZE_64 (0x3u << 0) /**< \brief (UDPHS_EPTCFG) 64 bytes */ +#define UDPHS_EPTCFG_EPT_SIZE_128 (0x4u << 0) /**< \brief (UDPHS_EPTCFG) 128 bytes */ +#define UDPHS_EPTCFG_EPT_SIZE_256 (0x5u << 0) /**< \brief (UDPHS_EPTCFG) 256 bytes */ +#define UDPHS_EPTCFG_EPT_SIZE_512 (0x6u << 0) /**< \brief (UDPHS_EPTCFG) 512 bytes */ +#define UDPHS_EPTCFG_EPT_SIZE_1024 (0x7u << 0) /**< \brief (UDPHS_EPTCFG) 1024 bytes */ +#define UDPHS_EPTCFG_EPT_DIR (0x1u << 3) /**< \brief (UDPHS_EPTCFG) Endpoint Direction */ +#define UDPHS_EPTCFG_EPT_TYPE_Pos 4 +#define UDPHS_EPTCFG_EPT_TYPE_Msk (0x3u << UDPHS_EPTCFG_EPT_TYPE_Pos) /**< \brief (UDPHS_EPTCFG) Endpoint Type */ +#define UDPHS_EPTCFG_EPT_TYPE_CTRL8 (0x0u << 4) /**< \brief (UDPHS_EPTCFG) Control endpoint */ +#define UDPHS_EPTCFG_EPT_TYPE_ISO (0x1u << 4) /**< \brief (UDPHS_EPTCFG) Isochronous endpoint */ +#define UDPHS_EPTCFG_EPT_TYPE_BULK (0x2u << 4) /**< \brief (UDPHS_EPTCFG) Bulk endpoint */ +#define UDPHS_EPTCFG_EPT_TYPE_INT (0x3u << 4) /**< \brief (UDPHS_EPTCFG) Interrupt endpoint */ +#define UDPHS_EPTCFG_BK_NUMBER_Pos 6 +#define UDPHS_EPTCFG_BK_NUMBER_Msk (0x3u << UDPHS_EPTCFG_BK_NUMBER_Pos) /**< \brief (UDPHS_EPTCFG) Number of Banks */ +#define UDPHS_EPTCFG_BK_NUMBER_0 (0x0u << 6) /**< \brief (UDPHS_EPTCFG) Zero bank, the endpoint is not mapped in memory */ +#define UDPHS_EPTCFG_BK_NUMBER_1 (0x1u << 6) /**< \brief (UDPHS_EPTCFG) One bank (bank 0) */ +#define UDPHS_EPTCFG_BK_NUMBER_2 (0x2u << 6) /**< \brief (UDPHS_EPTCFG) Double bank (Ping-Pong: bank0/bank1) */ +#define UDPHS_EPTCFG_BK_NUMBER_3 (0x3u << 6) /**< \brief (UDPHS_EPTCFG) Triple bank (bank0/bank1/bank2) */ +#define UDPHS_EPTCFG_NB_TRANS_Pos 8 +#define UDPHS_EPTCFG_NB_TRANS_Msk (0x3u << UDPHS_EPTCFG_NB_TRANS_Pos) /**< \brief (UDPHS_EPTCFG) Number Of Transaction per Microframe */ +#define UDPHS_EPTCFG_NB_TRANS(value) ((UDPHS_EPTCFG_NB_TRANS_Msk & ((value) << UDPHS_EPTCFG_NB_TRANS_Pos))) +#define UDPHS_EPTCFG_EPT_MAPD (0x1u << 31) /**< \brief (UDPHS_EPTCFG) Endpoint Mapped */ +/* -------- UDPHS_EPTCTLENB : (UDPHS Offset: N/A) UDPHS Endpoint Control Enable Register -------- */ +#define UDPHS_EPTCTLENB_EPT_ENABL (0x1u << 0) /**< \brief (UDPHS_EPTCTLENB) Endpoint Enable */ +#define UDPHS_EPTCTLENB_AUTO_VALID (0x1u << 1) /**< \brief (UDPHS_EPTCTLENB) Packet Auto-Valid Enable */ +#define UDPHS_EPTCTLENB_INTDIS_DMA (0x1u << 3) /**< \brief (UDPHS_EPTCTLENB) Interrupts Disable DMA */ +#define UDPHS_EPTCTLENB_NYET_DIS (0x1u << 4) /**< \brief (UDPHS_EPTCTLENB) NYET Disable (Only for High Speed Bulk OUT endpoints) */ +#define UDPHS_EPTCTLENB_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTCTLENB) Overflow Error Interrupt Enable */ +#define UDPHS_EPTCTLENB_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCTLENB) Received OUT Data Interrupt Enable */ +#define UDPHS_EPTCTLENB_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCTLENB) Transmitted IN Data Complete Interrupt Enable */ +#define UDPHS_EPTCTLENB_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTCTLENB) TX Packet Ready Interrupt Enable */ +#define UDPHS_EPTCTLENB_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCTLENB) Received SETUP */ +#define UDPHS_EPTCTLENB_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCTLENB) Stall Sent Interrupt Enable */ +#define UDPHS_EPTCTLENB_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCTLENB) NAKIN Interrupt Enable */ +#define UDPHS_EPTCTLENB_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCTLENB) NAKOUT Interrupt Enable */ +#define UDPHS_EPTCTLENB_BUSY_BANK (0x1u << 18) /**< \brief (UDPHS_EPTCTLENB) Busy Bank Interrupt Enable */ +#define UDPHS_EPTCTLENB_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTCTLENB) Short Packet Send/Short Packet Interrupt Enable */ +#define UDPHS_EPTCTLENB_DATAX_RX (0x1u << 6) /**< \brief (UDPHS_EPTCTLENB) DATAx Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints) */ +#define UDPHS_EPTCTLENB_MDATA_RX (0x1u << 7) /**< \brief (UDPHS_EPTCTLENB) MDATA Interrupt Enable (Only for high bandwidth Isochronous OUT endpoints) */ +#define UDPHS_EPTCTLENB_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTCTLENB) TX Packet Ready/Transaction Error Interrupt Enable */ +#define UDPHS_EPTCTLENB_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCTLENB) Error Flow Interrupt Enable */ +#define UDPHS_EPTCTLENB_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCTLENB) ISO CRC Error/Number of Transaction Error Interrupt Enable */ +#define UDPHS_EPTCTLENB_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCTLENB) Bank Flush Error Interrupt Enable */ +/* -------- UDPHS_EPTCTLDIS : (UDPHS Offset: N/A) UDPHS Endpoint Control Disable Register -------- */ +#define UDPHS_EPTCTLDIS_EPT_DISABL (0x1u << 0) /**< \brief (UDPHS_EPTCTLDIS) Endpoint Disable */ +#define UDPHS_EPTCTLDIS_AUTO_VALID (0x1u << 1) /**< \brief (UDPHS_EPTCTLDIS) Packet Auto-Valid Disable */ +#define UDPHS_EPTCTLDIS_INTDIS_DMA (0x1u << 3) /**< \brief (UDPHS_EPTCTLDIS) Interrupts Disable DMA */ +#define UDPHS_EPTCTLDIS_NYET_DIS (0x1u << 4) /**< \brief (UDPHS_EPTCTLDIS) NYET Enable (Only for High Speed Bulk OUT endpoints) */ +#define UDPHS_EPTCTLDIS_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTCTLDIS) Overflow Error Interrupt Disable */ +#define UDPHS_EPTCTLDIS_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCTLDIS) Received OUT Data Interrupt Disable */ +#define UDPHS_EPTCTLDIS_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCTLDIS) Transmitted IN Data Complete Interrupt Disable */ +#define UDPHS_EPTCTLDIS_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTCTLDIS) TX Packet Ready Interrupt Disable */ +#define UDPHS_EPTCTLDIS_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCTLDIS) Received SETUP Interrupt Disable */ +#define UDPHS_EPTCTLDIS_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCTLDIS) Stall Sent Interrupt Disable */ +#define UDPHS_EPTCTLDIS_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCTLDIS) NAKIN Interrupt Disable */ +#define UDPHS_EPTCTLDIS_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCTLDIS) NAKOUT Interrupt Disable */ +#define UDPHS_EPTCTLDIS_BUSY_BANK (0x1u << 18) /**< \brief (UDPHS_EPTCTLDIS) Busy Bank Interrupt Disable */ +#define UDPHS_EPTCTLDIS_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTCTLDIS) Short Packet Interrupt Disable */ +#define UDPHS_EPTCTLDIS_DATAX_RX (0x1u << 6) /**< \brief (UDPHS_EPTCTLDIS) DATAx Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints) */ +#define UDPHS_EPTCTLDIS_MDATA_RX (0x1u << 7) /**< \brief (UDPHS_EPTCTLDIS) MDATA Interrupt Disable (Only for High Bandwidth Isochronous OUT endpoints) */ +#define UDPHS_EPTCTLDIS_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTCTLDIS) TX Packet Ready/Transaction Error Interrupt Disable */ +#define UDPHS_EPTCTLDIS_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCTLDIS) Error Flow Interrupt Disable */ +#define UDPHS_EPTCTLDIS_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCTLDIS) ISO CRC Error/Number of Transaction Error Interrupt Disable */ +#define UDPHS_EPTCTLDIS_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCTLDIS) bank flush error Interrupt Disable */ +/* -------- UDPHS_EPTCTL : (UDPHS Offset: N/A) UDPHS Endpoint Control Register -------- */ +#define UDPHS_EPTCTL_EPT_ENABL (0x1u << 0) /**< \brief (UDPHS_EPTCTL) Endpoint Enable */ +#define UDPHS_EPTCTL_AUTO_VALID (0x1u << 1) /**< \brief (UDPHS_EPTCTL) Packet Auto-Valid Enabled (Not for CONTROL Endpoints) */ +#define UDPHS_EPTCTL_INTDIS_DMA (0x1u << 3) /**< \brief (UDPHS_EPTCTL) Interrupt Disables DMA */ +#define UDPHS_EPTCTL_NYET_DIS (0x1u << 4) /**< \brief (UDPHS_EPTCTL) NYET Disable (Only for High Speed Bulk OUT endpoints) */ +#define UDPHS_EPTCTL_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTCTL) Overflow Error Interrupt Enabled */ +#define UDPHS_EPTCTL_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCTL) Received OUT Data Interrupt Enabled */ +#define UDPHS_EPTCTL_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCTL) Transmitted IN Data Complete Interrupt Enabled */ +#define UDPHS_EPTCTL_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTCTL) TX Packet Ready Interrupt Enabled */ +#define UDPHS_EPTCTL_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCTL) Received SETUP Interrupt Enabled */ +#define UDPHS_EPTCTL_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCTL) Stall Sent Interrupt Enabled */ +#define UDPHS_EPTCTL_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCTL) NAKIN Interrupt Enabled */ +#define UDPHS_EPTCTL_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCTL) NAKOUT Interrupt Enabled */ +#define UDPHS_EPTCTL_BUSY_BANK (0x1u << 18) /**< \brief (UDPHS_EPTCTL) Busy Bank Interrupt Enabled */ +#define UDPHS_EPTCTL_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTCTL) Short Packet Interrupt Enabled */ +#define UDPHS_EPTCTL_DATAX_RX (0x1u << 6) /**< \brief (UDPHS_EPTCTL) DATAx Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints) */ +#define UDPHS_EPTCTL_MDATA_RX (0x1u << 7) /**< \brief (UDPHS_EPTCTL) MDATA Interrupt Enabled (Only for High Bandwidth Isochronous OUT endpoints) */ +#define UDPHS_EPTCTL_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTCTL) TX Packet Ready/Transaction Error Interrupt Enabled */ +#define UDPHS_EPTCTL_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCTL) Error Flow Interrupt Enabled */ +#define UDPHS_EPTCTL_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCTL) ISO CRC Error/Number of Transaction Error Interrupt Enabled */ +#define UDPHS_EPTCTL_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCTL) Bank Flush Error Interrupt Enabled */ +/* -------- UDPHS_EPTSETSTA : (UDPHS Offset: N/A) UDPHS Endpoint Set Status Register -------- */ +#define UDPHS_EPTSETSTA_FRCESTALL (0x1u << 5) /**< \brief (UDPHS_EPTSETSTA) Stall Handshake Request Set */ +#define UDPHS_EPTSETSTA_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTSETSTA) KILL Bank Set (for IN Endpoint) */ +#define UDPHS_EPTSETSTA_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTSETSTA) TX Packet Ready Set */ +#define UDPHS_EPTSETSTA_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTSETSTA) TX Packet Ready Set */ +/* -------- UDPHS_EPTCLRSTA : (UDPHS Offset: N/A) UDPHS Endpoint Clear Status Register -------- */ +#define UDPHS_EPTCLRSTA_FRCESTALL (0x1u << 5) /**< \brief (UDPHS_EPTCLRSTA) Stall Handshake Request Clear */ +#define UDPHS_EPTCLRSTA_TOGGLESQ (0x1u << 6) /**< \brief (UDPHS_EPTCLRSTA) Data Toggle Clear */ +#define UDPHS_EPTCLRSTA_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTCLRSTA) Received OUT Data Clear */ +#define UDPHS_EPTCLRSTA_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTCLRSTA) Transmitted IN Data Complete Clear */ +#define UDPHS_EPTCLRSTA_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTCLRSTA) Received SETUP Clear */ +#define UDPHS_EPTCLRSTA_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTCLRSTA) Stall Sent Clear */ +#define UDPHS_EPTCLRSTA_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTCLRSTA) NAKIN Clear */ +#define UDPHS_EPTCLRSTA_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTCLRSTA) NAKOUT Clear */ +#define UDPHS_EPTCLRSTA_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTCLRSTA) Error Flow Clear */ +#define UDPHS_EPTCLRSTA_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTCLRSTA) Number of Transaction Error Clear */ +#define UDPHS_EPTCLRSTA_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTCLRSTA) Bank Flush Error Clear */ +/* -------- UDPHS_EPTSTA : (UDPHS Offset: N/A) UDPHS Endpoint Status Register -------- */ +#define UDPHS_EPTSTA_FRCESTALL (0x1u << 5) /**< \brief (UDPHS_EPTSTA) Stall Handshake Request */ +#define UDPHS_EPTSTA_TOGGLESQ_STA_Pos 6 +#define UDPHS_EPTSTA_TOGGLESQ_STA_Msk (0x3u << UDPHS_EPTSTA_TOGGLESQ_STA_Pos) /**< \brief (UDPHS_EPTSTA) Toggle Sequencing */ +#define UDPHS_EPTSTA_TOGGLESQ_STA_DATA0 (0x0u << 6) /**< \brief (UDPHS_EPTSTA) DATA0 */ +#define UDPHS_EPTSTA_TOGGLESQ_STA_DATA1 (0x1u << 6) /**< \brief (UDPHS_EPTSTA) DATA1 */ +#define UDPHS_EPTSTA_TOGGLESQ_STA_DATA2 (0x2u << 6) /**< \brief (UDPHS_EPTSTA) Reserved for High Bandwidth Isochronous Endpoint */ +#define UDPHS_EPTSTA_TOGGLESQ_STA_MDATA (0x3u << 6) /**< \brief (UDPHS_EPTSTA) Reserved for High Bandwidth Isochronous Endpoint */ +#define UDPHS_EPTSTA_ERR_OVFLW (0x1u << 8) /**< \brief (UDPHS_EPTSTA) Overflow Error */ +#define UDPHS_EPTSTA_RXRDY_TXKL (0x1u << 9) /**< \brief (UDPHS_EPTSTA) Received OUT Data/KILL Bank */ +#define UDPHS_EPTSTA_TX_COMPLT (0x1u << 10) /**< \brief (UDPHS_EPTSTA) Transmitted IN Data Complete */ +#define UDPHS_EPTSTA_TXRDY (0x1u << 11) /**< \brief (UDPHS_EPTSTA) TX Packet Ready */ +#define UDPHS_EPTSTA_RX_SETUP (0x1u << 12) /**< \brief (UDPHS_EPTSTA) Received SETUP */ +#define UDPHS_EPTSTA_STALL_SNT (0x1u << 13) /**< \brief (UDPHS_EPTSTA) Stall Sent */ +#define UDPHS_EPTSTA_NAK_IN (0x1u << 14) /**< \brief (UDPHS_EPTSTA) NAK IN */ +#define UDPHS_EPTSTA_NAK_OUT (0x1u << 15) /**< \brief (UDPHS_EPTSTA) NAK OUT */ +#define UDPHS_EPTSTA_CURBK_CTLDIR_Pos 16 +#define UDPHS_EPTSTA_CURBK_CTLDIR_Msk (0x3u << UDPHS_EPTSTA_CURBK_CTLDIR_Pos) /**< \brief (UDPHS_EPTSTA) Current Bank/Control Direction */ +#define UDPHS_EPTSTA_BUSY_BANK_STA_Pos 18 +#define UDPHS_EPTSTA_BUSY_BANK_STA_Msk (0x3u << UDPHS_EPTSTA_BUSY_BANK_STA_Pos) /**< \brief (UDPHS_EPTSTA) Busy Bank Number */ +#define UDPHS_EPTSTA_BUSY_BANK_STA_1BUSYBANK (0x0u << 18) /**< \brief (UDPHS_EPTSTA) 1 busy bank */ +#define UDPHS_EPTSTA_BUSY_BANK_STA_2BUSYBANKS (0x1u << 18) /**< \brief (UDPHS_EPTSTA) 2 busy banks */ +#define UDPHS_EPTSTA_BUSY_BANK_STA_3BUSYBANKS (0x2u << 18) /**< \brief (UDPHS_EPTSTA) 3 busy banks */ +#define UDPHS_EPTSTA_BYTE_COUNT_Pos 20 +#define UDPHS_EPTSTA_BYTE_COUNT_Msk (0x7ffu << UDPHS_EPTSTA_BYTE_COUNT_Pos) /**< \brief (UDPHS_EPTSTA) UDPHS Byte Count */ +#define UDPHS_EPTSTA_SHRT_PCKT (0x1u << 31) /**< \brief (UDPHS_EPTSTA) Short Packet */ +#define UDPHS_EPTSTA_TXRDY_TRER (0x1u << 11) /**< \brief (UDPHS_EPTSTA) TX Packet Ready/Transaction Error */ +#define UDPHS_EPTSTA_ERR_FL_ISO (0x1u << 12) /**< \brief (UDPHS_EPTSTA) Error Flow */ +#define UDPHS_EPTSTA_ERR_CRC_NTR (0x1u << 13) /**< \brief (UDPHS_EPTSTA) CRC ISO Error/Number of Transaction Error */ +#define UDPHS_EPTSTA_ERR_FLUSH (0x1u << 14) /**< \brief (UDPHS_EPTSTA) Bank Flush Error */ +#define UDPHS_EPTSTA_CURBK_Pos 16 +#define UDPHS_EPTSTA_CURBK_Msk (0x3u << UDPHS_EPTSTA_CURBK_Pos) /**< \brief (UDPHS_EPTSTA) Current Bank */ +#define UDPHS_EPTSTA_CURBK_BANK0 (0x0u << 16) /**< \brief (UDPHS_EPTSTA) Bank 0 (or single bank) */ +#define UDPHS_EPTSTA_CURBK_BANK1 (0x1u << 16) /**< \brief (UDPHS_EPTSTA) Bank 1 */ +#define UDPHS_EPTSTA_CURBK_BANK2 (0x2u << 16) /**< \brief (UDPHS_EPTSTA) Bank 2 */ +/* -------- UDPHS_DMANXTDSC : (UDPHS Offset: N/A) UDPHS DMA Next Descriptor Address Register -------- */ +#define UDPHS_DMANXTDSC_NXT_DSC_ADD_Pos 0 +#define UDPHS_DMANXTDSC_NXT_DSC_ADD_Msk (0xffffffffu << UDPHS_DMANXTDSC_NXT_DSC_ADD_Pos) /**< \brief (UDPHS_DMANXTDSC) Next Descriptor Address */ +#define UDPHS_DMANXTDSC_NXT_DSC_ADD(value) ((UDPHS_DMANXTDSC_NXT_DSC_ADD_Msk & ((value) << UDPHS_DMANXTDSC_NXT_DSC_ADD_Pos))) +/* -------- UDPHS_DMAADDRESS : (UDPHS Offset: N/A) UDPHS DMA Channel Address Register -------- */ +#define UDPHS_DMAADDRESS_BUFF_ADD_Pos 0 +#define UDPHS_DMAADDRESS_BUFF_ADD_Msk (0xffffffffu << UDPHS_DMAADDRESS_BUFF_ADD_Pos) /**< \brief (UDPHS_DMAADDRESS) Buffer Address */ +#define UDPHS_DMAADDRESS_BUFF_ADD(value) ((UDPHS_DMAADDRESS_BUFF_ADD_Msk & ((value) << UDPHS_DMAADDRESS_BUFF_ADD_Pos))) +/* -------- UDPHS_DMACONTROL : (UDPHS Offset: N/A) UDPHS DMA Channel Control Register -------- */ +#define UDPHS_DMACONTROL_CHANN_ENB (0x1u << 0) /**< \brief (UDPHS_DMACONTROL) (Channel Enable Command) */ +#define UDPHS_DMACONTROL_LDNXT_DSC (0x1u << 1) /**< \brief (UDPHS_DMACONTROL) Load Next Channel Transfer Descriptor Enable (Command) */ +#define UDPHS_DMACONTROL_END_TR_EN (0x1u << 2) /**< \brief (UDPHS_DMACONTROL) End of Transfer Enable (Control) */ +#define UDPHS_DMACONTROL_END_B_EN (0x1u << 3) /**< \brief (UDPHS_DMACONTROL) End of Buffer Enable (Control) */ +#define UDPHS_DMACONTROL_END_TR_IT (0x1u << 4) /**< \brief (UDPHS_DMACONTROL) End of Transfer Interrupt Enable */ +#define UDPHS_DMACONTROL_END_BUFFIT (0x1u << 5) /**< \brief (UDPHS_DMACONTROL) End of Buffer Interrupt Enable */ +#define UDPHS_DMACONTROL_DESC_LD_IT (0x1u << 6) /**< \brief (UDPHS_DMACONTROL) Descriptor Loaded Interrupt Enable */ +#define UDPHS_DMACONTROL_BURST_LCK (0x1u << 7) /**< \brief (UDPHS_DMACONTROL) Burst Lock Enable */ +#define UDPHS_DMACONTROL_BUFF_LENGTH_Pos 16 +#define UDPHS_DMACONTROL_BUFF_LENGTH_Msk (0xffffu << UDPHS_DMACONTROL_BUFF_LENGTH_Pos) /**< \brief (UDPHS_DMACONTROL) Buffer Byte Length (Write-only) */ +#define UDPHS_DMACONTROL_BUFF_LENGTH(value) ((UDPHS_DMACONTROL_BUFF_LENGTH_Msk & ((value) << UDPHS_DMACONTROL_BUFF_LENGTH_Pos))) +/* -------- UDPHS_DMASTATUS : (UDPHS Offset: N/A) UDPHS DMA Channel Status Register -------- */ +#define UDPHS_DMASTATUS_CHANN_ENB (0x1u << 0) /**< \brief (UDPHS_DMASTATUS) Channel Enable Status */ +#define UDPHS_DMASTATUS_CHANN_ACT (0x1u << 1) /**< \brief (UDPHS_DMASTATUS) Channel Active Status */ +#define UDPHS_DMASTATUS_END_TR_ST (0x1u << 4) /**< \brief (UDPHS_DMASTATUS) End of Channel Transfer Status */ +#define UDPHS_DMASTATUS_END_BF_ST (0x1u << 5) /**< \brief (UDPHS_DMASTATUS) End of Channel Buffer Status */ +#define UDPHS_DMASTATUS_DESC_LDST (0x1u << 6) /**< \brief (UDPHS_DMASTATUS) Descriptor Loaded Status */ +#define UDPHS_DMASTATUS_BUFF_COUNT_Pos 16 +#define UDPHS_DMASTATUS_BUFF_COUNT_Msk (0xffffu << UDPHS_DMASTATUS_BUFF_COUNT_Pos) /**< \brief (UDPHS_DMASTATUS) Buffer Byte Count */ +#define UDPHS_DMASTATUS_BUFF_COUNT(value) ((UDPHS_DMASTATUS_BUFF_COUNT_Msk & ((value) << UDPHS_DMASTATUS_BUFF_COUNT_Pos))) + +/*@}*/ + + +#endif /* _SAM3U_UDPHS_COMPONENT_ */