Revision 8:682b575fd7b3, committed 2020-11-02

Comitter:

f3d

Date:

Mon Nov 02 08:48:54 2020 +0000

Parent:

6:0038b9f778a5

Commit message:

First commit

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BLEservice.h	Mon Nov 02 08:48:54 2020 +0000
@@ -0,0 +1,72 @@
+//BLEservice.h
+#ifndef __BLESERVICE_H
+#define __BLESERVICE_H
+#define MAX_CHARACTERISTICS 16
+extern Serial pc;
+typedef void (*fptr)(void);
+
+class BLEservice {
+public:
+    uint16_t Service_UUID; 
+    uint32_t Characteristic_Count;
+    uint16_t Characteristic_UUID_Array[MAX_CHARACTERISTICS]; // This will contain the list of characterisic UUID's
+    BLEservice(BLEDevice &_ble,uint16_t Service_UUID,uint32_t Characteristic_Count, uint16_t *Characteristic_UUID_Array, fptr init, fptr poll,int Notify=0): ble(_ble)
+    {
+        
+        pc.printf("Entering constructor\r\n");
+        this->Service_UUID = Service_UUID;
+        this->Characteristic_Count = Characteristic_Count;
+        pc.printf("Array of %d chars created\r\n",Characteristic_Count);
+        for (int i=0;i<Characteristic_Count;i++)
+        {
+            pc.printf("UUID %d = %d\r\n",i,Characteristic_UUID_Array[i]);
+            printf("Address of Characteristic_UUID_Array = %p\r\n",this->Characteristic_UUID_Array);
+            this->Characteristic_UUID_Array[i]=Characteristic_UUID_Array[i];
+        }
+        pc.printf("chars copied\r\n");
+        this->init = init;
+        this->poll = poll;
+        Value = 0;        
+        GattCharacteristic *charTable[MAX_CHARACTERISTICS];
+        for (int i=0; i < Characteristic_Count; i++)
+        {
+            if (Notify == 1)
+            {
+                Characteristics[i] = new ReadWriteGattCharacteristic<uint16_t>(this->Characteristic_UUID_Array[i],&Value,GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY);  
+            }
+            else
+            {
+                Characteristics[i] = new ReadWriteGattCharacteristic<uint16_t>(this->Characteristic_UUID_Array[i],&Value);  
+            }
+            charTable[i] = Characteristics[i];
+            printf("Characteristic %d added\r\n",this->Characteristic_UUID_Array[i]);
+        }
+        GattService   Service(this->Service_UUID, charTable, Characteristic_Count);
+        pc.printf("Service created\r\n");
+        ble.addService(Service);
+        pc.printf("Service added\r\n");
+    }            
+    ~BLEservice()
+    {
+        
+    }
+    fptr init;
+    fptr poll;            
+    uint16_t readCharacteristic(uint16_t index)
+    {
+        uint16_t Value,Len;
+        Len = sizeof(Value);
+        ble.gattServer().read(this->Characteristics[index]->getValueHandle(),(uint8_t *)&Value,&Len); 
+        return Value;
+    }
+    void writeCharacteristic(uint16_t index, uint16_t Value)
+    {
+         pc.printf("Writing %d to handle %d\r\n",Value,this->Characteristics[index]->getValueHandle());
+         
+         ble.gattServer().write(this->Characteristics[index]->getValueHandle(),(uint8_t *)&Value,sizeof(uint16_t)); 
+    }
+    BLEDevice &ble; // Keep track of the Bluetoot device we are attached to.
+    ReadWriteGattCharacteristic<uint16_t> * Characteristics[MAX_CHARACTERISTICS];
+    uint16_t Value;
+};
+#endif

--- a/main.cpp	Sun Oct 04 17:28:24 2020 +0000
+++ b/main.cpp	Mon Nov 02 08:48:54 2020 +0000
@@ -16,12 +16,224 @@
 
 #include "mbed.h"
 #include "ble/BLE.h"
+#include "BLEservice.h"
+void bleInitComplete(BLE::InitializationCompleteCallbackContext *params);
+void onBleInitError(BLE &ble, ble_error_t error);
+void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params);
+Ticker ticker;
+Serial pc(P0_24, P0_25);
 
 
-int main(void)
+const static char     DEVICE_NAME[] = "Test2020";
+#define LED_SERVICE 0xA000
+#define BTN_SERVICE 0x1eee
+#define ACCEL_SERVICE 0xA012
+#define TEMP_SERVICE 0xA022
+static const uint16_t uuid16_list[] = {LED_SERVICE,BTN_SERVICE,ACCEL_SERVICE,TEMP_SERVICE};
+BLEservice * LED;
+BLEservice * Button;
+BLEservice *Accel;
+BLEservice *Temp;
+const int LSM303_MAG_ADDRESS=(0x1e << 1);
+DigitalOut col1(P0_4, 0);
+DigitalOut alivenessLED(P0_13, 0);
+DigitalOut actuatedLED(P0_14, 0);
+I2C i2c(P0_30, P0_0); // SDA is on P0_30, SCL is on P0_0
+const int LSM303_ACCEL_ADDRESS = (0x19<<1); 
+void initTemp()
+{
+        //init code for temp sensor
+    char Data[8]; // Declare a buffer for data transfer    
+    int Status;
+
+    Data[0] =0x1f;
+    Data[1] = 0b11000000;
+    i2c.write(LSM303_ACCEL_ADDRESS,Data,2);
+    
+    Data[0] = 0x23;
+    Data[1] = 0b10000000;
+    i2c.write(LSM303_ACCEL_ADDRESS,Data,2);
+
+}
+void pollTemp()
+{
+    char Data[8]; // Declare a buffer for data transfer    
+    int Status;
+    int16_t T;     
+    
+    Data[0]=0x80+ 0x0c; // Register number 0x28 has the X data (2 bytes)
+    Status = i2c.write(LSM303_ACCEL_ADDRESS,Data,1,true);  // Write register number
+    Status = i2c.read(LSM303_ACCEL_ADDRESS,Data,2); // Read register contents
+    T = Data[1];
+    T = (T << 8) + Data[0];
+    T = T / 16;
+    T = (20 << 3) + T;
+    pc.printf("T=%d\r\n",T/4);
+    Temp->writeCharacteristic(0,T/4);
+}
+void initLED()
+{
+    actuatedLED = 0;   
+}
+void pollLED()
+{    
+    uint16_t Value;    
+    Value = LED->readCharacteristic(0);
+    actuatedLED = Value;
+}
+DigitalIn ButtonA(P0_17);
+DigitalIn ButtonB(P0_26);
+void initButton()
 {
     
+}
+void pollButton()
+{
+    uint16_t ValueA = ButtonA;
+    pc.printf("Button A = %d\r\n",ValueA);    
+    Button->writeCharacteristic(0,ValueA);
+    uint16_t ValueB = ButtonB;
+    pc.printf("Button B = %d\r\n",ValueB);
+    Button->writeCharacteristic(1,ValueB);
+}
+
+
+
+void initAccel()
+{
+    // Wake the accelerometer from sleep mode by writing disabling low power mode, setting freq to 10Hz and enabling all three axes
+    char Data[8]; // Declare a buffer for data transfer    
+    int Status;
+    Data[0]=0x20;   // wake up LSM303 (max speed, all accel channels)
+    Data[1]=0x77;
+    Status = i2c.write(LSM303_ACCEL_ADDRESS,Data,2);  // Write data to register   
+   
+    Data[0]=0x23;   // enable high resolution mode
+    Data[1]=0x0e; 
+    Status = i2c.write(LSM303_ACCEL_ADDRESS,Data,2);  // Write data to register   
+    
+}
+void pollAccel()
+{
+    char Data[8]; // Declare a buffer for data transfer    
+    int Status;
+    int16_t X;                                 
+    Data[0]=0x80 + 0x28; // Register number 0x28 has the X data (2 bytes)
+    Status = i2c.write(LSM303_ACCEL_ADDRESS,Data,1,true);  // Write register number
+    Status = i2c.read(LSM303_ACCEL_ADDRESS,Data,2); // Read register contents
+    X = Data[1];
+    X = (X << 8) + Data[0];
+    
+    int16_t Y;
+    Data[0]=0x80 + 0x2a; // Register number 0x2a has the Y data (2 bytes)
+    Status = i2c.write(LSM303_ACCEL_ADDRESS,Data,1,true);  // Write register number
+    Status = i2c.read(LSM303_ACCEL_ADDRESS,Data,2); // Read register contents
+    Y = Data[1];
+    Y = (Y << 8) + Data[0];
+    
+    int16_t Z;
+    Data[0]=0x80 + 0x2c; // Register number 0x2c has the Z data (2 bytes)
+    Status = i2c.write(LSM303_ACCEL_ADDRESS,Data,1,true);  // Write register number
+    Status = i2c.read(LSM303_ACCEL_ADDRESS,Data,2); // Read register contents
+    Z = Data[1];
+    Z = (Z << 8) + Data[0];
+    pc.printf("X : %d , Y %d , Z %d \r\n",X,Y,Z);
+    Accel->writeCharacteristic(0,X);
+    Accel->writeCharacteristic(1,Y);
+    Accel->writeCharacteristic(2,Z);
+}
+void onDataWrittenCallback(const GattWriteCallbackParams *params)
+{   
+    pc.printf("Got writeback for %d\r\n",params->handle);
+}
+void tick()
+{
+}
+void pollIO()
+{    
+    pc.printf("Poll\r\n");
+    LED->poll();
+    Button->poll();
+    Accel->poll();
+    Temp->poll();
+}
+int main(void)
+{       
+    BLE &ble = BLE::Instance();
+    ble.init(bleInitComplete);
+ /* SpinWait for initialization to complete. This is necessary because the
+     * BLE object is used in the main loop below. */
+    while (ble.hasInitialized()  == false) { /* spin loop */ }
+
+    pc.printf("BLE init complete\r\n");
+    
+    uint16_t LED_char_array[]={0xabcd};
+    pc.printf("Creating LED Service\r\n");
+    LED = new BLEservice(ble,LED_SERVICE,1,LED_char_array,initLED,pollLED);        
+    LED->init();
+    pc.printf("LED service ready\r\n");
+    
+    uint16_t Button_char_array[]={0x2021,0x2022};
+    pc.printf("Creating Button Service\r\n");
+    Button = new BLEservice(ble,BTN_SERVICE,2,Button_char_array,initButton,pollButton,1);        
+    Button->init();
+    pc.printf("Button service ready\r\n");
+    
+    uint16_t Accel_char_array[]={0xA013,0xA014,0xA015};
+    pc.printf("Creating Accel Service\r\n");
+    Accel = new BLEservice(ble,ACCEL_SERVICE,3,Accel_char_array,initAccel,pollAccel);        
+    Accel->init();
+    pc.printf("Accel service ready\r\n");
+    
+    uint16_t Temp_char_array[]={0xf00d};
+    pc.printf("Creating Temp Service\r\n");
+    Temp = new BLEservice(ble,TEMP_SERVICE,1,Temp_char_array,initTemp,pollTemp);        
+    Temp->init();
+    pc.printf("Temp service ready\r\n");
+    
+    ticker.attach(tick, 1); /* wake from sleep every 100ms */
     while (1) 
-    {
+    {   pollIO();
+        ble.waitForEvent();
     }
 }
+void bleInitComplete(BLE::InitializationCompleteCallbackContext *params)
+{
+    BLE&        ble   = params->ble;
+    ble_error_t error = params->error;
+
+    if (error != BLE_ERROR_NONE) {
+        /* In case of error, forward the error handling to onBleInitError */
+        onBleInitError(ble, error);
+        return;
+    }
+
+    /* Ensure that it is the default instance of BLE */
+    if(ble.getInstanceID() != BLE::DEFAULT_INSTANCE) {
+        return;
+    }
+ 
+    ble.gap().onDisconnection(disconnectionCallback);
+    ble.gattServer().onDataWritten(onDataWrittenCallback);
+    // ble.gattServer().onDataRead(onDataReadCallback); // Nordic Soft device will not call this so have to poll instead
+  
+    
+    /* setup advertising */
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
+    ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+    ble.gap().setAdvertisingInterval(500); /* 500ms. */
+    pc.printf("Starting advertising\r\n");
+    ble.gap().startAdvertising();
+}
+void onBleInitError(BLE &ble, ble_error_t error)
+{
+    /* Initialization error handling should go here */
+    pc.printf("BLE init error\r\n");
+}
+void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params)
+{
+    pc.printf("Disconnected, restarting advertising\r\n");
+    BLE::Instance().gap().startAdvertising();
+}