Diff: libraries/ad7791/AD7791.h

Revision:

24:dae7123d432a

Parent:

23:174dd32fa661

Child:

25:b9e3756c9cbb

Child:

26:1b988c505139

Child:

27:3c32495708f4

--- a/libraries/ad7791/AD7791.h	Tue May 17 18:37:29 2016 +0300
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,176 +0,0 @@
-/**
-*   @file     AD7791.h
-*   @brief    Header file for AD7791 ADC
-*   @author   Analog Devices Inc.
-*
-* For support please go to:
-* Github: https://github.com/analogdevicesinc/mbed-adi
-* Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers
-* Product: http://www.analog.com/ad7791
-* More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
-
-********************************************************************************
-* Copyright 2016(c) Analog Devices, Inc.
-*
-* All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions are met:
-*  - Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer.
-*  - Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in
-*    the documentation and/or other materials provided with the
-*    distribution.
-*  - Neither the name of Analog Devices, Inc. nor the names of its
-*    contributors may be used to endorse or promote products derived
-*    from this software without specific prior written permission.
-*  - The use of this software may or may not infringe the patent rights
-*    of one or more patent holders.  This license does not release you
-*    from the requirement that you obtain separate licenses from these
-*    patent holders to use this software.
-*  - Use of the software either in source or binary form, must be run
-*    on or directly connected to an Analog Devices Inc. component.
-*
-* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
-* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
-* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-********************************************************************************/
-
-#ifndef AD7791_H
-#define AD7791_H
-
-#include "mbed.h"
-
-/**
- * Comment this line if you want to turn off the debug mode.
- * The debug mode will send a message if an exception occurs within AD7791 driver
- */
-
-#define AD7791_DEBUG_MODE
-
-/**
- * @brief Analog Devices AD7791 SPI 16-bit Buffered Sigma-Delta ADC
- */
-class AD7791
-{
-public:
-    /// AD7791 registers
-    typedef enum {
-        COMMUNICATION_REG = 0, ///< Communication register
-        STATUS_REG = 0,        ///< Status register
-        MODE_REG,              ///< Mode register
-        FILTER_REG,            ///< Filter Register
-        DATA_REG               ///< Data register
-    } AD7791Register_t;
-
-    /// AD7791 channel configuration
-    typedef enum {
-        DIFFERENTIAL = 0, ///< AIN(+)-AIN(-)
-        RESERVED,     ///< reserved
-        SHORT,        ///< AIN(-)-AIN(-)
-        VDDMONITOR    ///< Monitor VDD
-    } AD7791Channel_t;
-
-    typedef enum {
-        CONTINOUS_CONVERSION_MODE = 0,
-        SINGLE_CONVERSION_MODE = 0x80,
-        SHUTDOWN_MODE = 0xC0
-    } AD7791Mode_t;
-
-    typedef enum    {
-        MD1 = 0x80, ///< Mode Select Bit 1
-        MD0 = 0x40, ///< Mode Select Bit 0
-//      G1 = 0x20,  ///< Range bit 1
-//      G0 = 0x10,  ///< Range bit 0
-        BO = 0x08,  ///< Burnout Current Enable bit
-        UB = 0x04,  ///< Unipolar/Bipolar bit
-        BUF = 0x02, ///< Buffered mode bit
-    } ModeRegisterBits_t;
-
-    typedef enum {
-        CLKDIV1 = 0x40, ///< Clock divider bit 1
-        CLKDIV0 = 0x20, ///< Clock divider bit 0
-        FS2 = 0x04, ///< Update rate bit 2
-        FS1 = 0x02, ///< Update rate bit 1
-        FS0 = 0x01, ///< Update rate bit 0
-    } FilterRegisterBits_t;
-
-    /*  typedef enum    {
-            RANGE_VREF = 0,
-            RANGE_VREF_DIV_2,
-            RANGE_VREF_DIV_4,
-            RANGE_VREF_DIV_8,
-        } AnalogInputRange_t;
-    */
-    /** SPI configuration & constructor */
-    AD7791( float reference_voltage, PinName CS = SPI_CS, PinName MOSI = SPI_MOSI, PinName MISO = SPI_MISO, PinName SCK = SPI_SCK);
-    void frequency(int hz);
-
-    /** Low level SPI bus comm methods */
-    void reset(void);
-
-    /** Register access methods*/
-    void set_channel(AD7791Channel_t channel);
-    void set_conversion_mode(AD7791Mode_t mode);
-    uint32_t read_data_reg();
-    uint8_t read_status_reg(void);
-    void write_filter_reg(uint8_t regVal);
-    uint8_t read_filter_reg(void);
-    void write_mode_reg(uint8_t regVal);
-    uint8_t read_mode_reg(void);
-//  void  set_range(AnalogInputRange_t range);
-//  AnalogInputRange_t get_range(void);
-
-    /** Reference voltage methods */
-    void  set_reference_voltage(float ref);
-    float get_reference_voltage(void);
-
-    /** Voltage read methods */
-    float read_voltage(void);
-    float data_to_voltage(uint32_t data);
-    uint32_t voltage_to_data(float voltage);
-
-    /** AnalogIn API */
-    float read(void);
-    uint32_t read_u32(void);
-    uint16_t read_u16(void);
-
-#ifdef MBED_OPERATORS
-    operator float();
-#endif
-
-private:
-    DigitalIn miso;
-    SPI ad7791;    ///< SPI instance of the AD7791
-    DigitalOut cs; ///< DigitalOut instance for the chipselect of the AD7791
-
-    float _vref;
-//  uint8_t _PGA_gain;
-    bool _continous_conversion;
-    AD7791Channel_t _channel;
-
-    void write_reg(AD7791Register_t regAddress, uint8_t regValue);
-    uint16_t write_spi(uint16_t data);
-    uint16_t read_reg (AD7791Register_t regAddress);
-
-    const static uint16_t _SINGLE_CONVERSION_TIMEOUT = 0xFFFF; // in 10us = 100ms
-    const static uint16_t _CONTINOUS_CONVERSION_TIMEOUT = 0xFFFF;
-    const static uint32_t _RESOLUTION = 0xFFFFFF;
-    const static uint8_t _RESET = 0xFF;
-    const static uint8_t _DUMMY_BYTE = 0xFF;
-    const static uint16_t _READ_FLAG = 0x0800;
-    const static uint8_t _DATA_READ    = 0x38;             // Read from the Data Register
-    const static uint8_t _DELAY_TIMING = 0x02;
-    const static uint8_t _SPI_MODE = 3;
-};
-
-#endif