Diff: examples/drvdiag/driver_wrapper/AD5270_Diag.cpp

Revision:

24:dae7123d432a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/drvdiag/driver_wrapper/AD5270_Diag.cpp	Wed May 18 16:57:57 2016 +0300
@@ -0,0 +1,142 @@
+/**
+*   @file     ad5270_diag.cpp
+*   @brief    Source file for the AD5270 wrapper used by the driver diag
+*   @author   Analog Devices Inc.
+*
+* For support please go to:
+* Github: https://github.com/analogdevicesinc/mbed-adi
+* Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers
+* More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
+
+********************************************************************************
+* Copyright 2016(c) Analog Devices, Inc.
+*
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*  - Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*  - Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in
+*    the documentation and/or other materials provided with the
+*    distribution.
+*  - Neither the name of Analog Devices, Inc. nor the names of its
+*    contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*  - The use of this software may or may not infringe the patent rights
+*    of one or more patent holders.  This license does not release you
+*    from the requirement that you obtain separate licenses from these
+*    patent holders to use this software.
+*  - Use of the software either in source or binary form, must be run
+*    on or directly connected to an Analog Devices Inc. component.
+*
+* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+********************************************************************************/
+
+#include "mbed.h"
+#include <stdio.h>
+#include <vector>
+#include <string>
+#include "AD5270_Diag.h"
+
+extern Serial pc;
+extern vector<string> cmdbuffer;
+
+AD5270_Diag::AD5270_Diag(AD5270& ad) : dut(ad)
+{
+
+}
+void AD5270_Diag::enable_50TP_programming()
+{
+    dut.enable_50TP_programming();
+    pc.printf("Enabled 50TP prog");
+
+}
+void AD5270_Diag::store_50TP()
+{
+    dut.store_50TP();
+    pc.printf("50TP stored");
+}
+void AD5270_Diag::disable_50TP_programming()
+{
+    dut.disable_50TP_programming();
+    pc.printf("Disabled 50TP prog");
+}
+
+void AD5270_Diag::write_RDAC()
+{
+    float res = strtof(cmdbuffer[1].c_str(), NULL);
+    dut.write_RDAC(res);
+    pc.printf("Wrote %f", res);
+}
+void AD5270_Diag::read_RDAC()
+{
+    pc.printf("Read %f", dut.read_RDAC());
+}
+void AD5270_Diag::write_cmd()
+{
+    uint8_t reg = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    uint8_t regVal = strtol(cmdbuffer[2].c_str(), NULL, 16);
+    pc.printf("Returned %x: ", dut.write_cmd(reg, regVal));
+}
+
+void AD5270_Diag::set_HiZ()
+{
+    pc.printf("SDO set to HiZ");
+    dut.set_SDO_HiZ();
+}
+
+void AD5270_Diag::read_50TP_last_address(void)
+{
+    pc.printf("Returned %x:", dut.read_50TP_last_address());
+}
+void AD5270_Diag::read_50TP_memory(void)
+{
+    uint8_t reg = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    pc.printf("Returned %x", dut.read_50TP_memory(reg));
+}
+
+void AD5270_Diag::write_ctrl_reg(void)
+{
+    uint8_t val = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    dut.write_ctrl_reg(val);
+    pc.printf("Wrote %x to ctrl_reg", val );
+}
+void AD5270_Diag::read_ctrl_reg(void)
+{
+    pc.printf("Read %x from ctrl_reg", dut.read_ctrl_reg());
+}
+
+void AD5270_Diag::reset_RDAC(void)
+{
+    dut.reset_RDAC();
+    pc.printf("Resetted rdac");
+}
+void AD5270_Diag::change_mode(void)
+{
+    uint8_t val = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    dut.change_mode(static_cast<AD5270::AD5270Modes_t>(val));
+    pc.printf("Changed mode to %x", val);
+}
+
+void AD5270_Diag::write_wiper_reg(void)
+{
+    uint16_t val = strtol(cmdbuffer[1].c_str(), NULL, 16);
+    dut.write_wiper_reg(val);
+    pc.printf("Wrote %x to wiper", val);
+}
+void AD5270_Diag::read_wiper_reg(void)
+{
+    pc.printf("Read %x from wiper", dut.read_wiper_reg());
+}