Diff: examples/drvdiag/driver_wrapper/CN0398_Diag.h

Revision:

33:c3ec596a29c2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/drvdiag/driver_wrapper/CN0398_Diag.h	Mon Nov 07 16:27:12 2016 +0200
@@ -0,0 +1,86 @@
+/**
+*   @file     ad7124_diag.h
+*   @brief    Header file for the AD7124 wrapper used by the driver diag
+*   @author   Analog Devices Inc.
+*
+* For support please go to:
+* Github: https://github.com/analogdevicesinc/mbed-adi
+* Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers
+* More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
+
+********************************************************************************
+* Copyright 2016(c) Analog Devices, Inc.
+*
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*  - Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*  - Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in
+*    the documentation and/or other materials provided with the
+*    distribution.
+*  - Neither the name of Analog Devices, Inc. nor the names of its
+*    contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*  - The use of this software may or may not infringe the patent rights
+*    of one or more patent holders.  This license does not release you
+*    from the requirement that you obtain separate licenses from these
+*    patent holders to use this software.
+*  - Use of the software either in source or binary form, must be run
+*    on or directly connected to an Analog Devices Inc. component.
+*
+* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+********************************************************************************/
+
+#ifndef CN0398_DIAG_H_
+#define CN0398_DIAG_H_
+#include "CN0398.h"
+#include "AD7124.h"
+
+class CN0398_Diag
+{
+public:
+    CN0398_Diag(CN0398& ad);
+
+    void init();
+    void enable_channel(int channel);
+    void disable_channel(int channel);
+    void enable_current_source();
+    void toggle_output(int channel, uint8_t state);
+    void readt();
+
+    void readm();
+    void offsetph();
+    void calibp(int point);
+    void readp();
+
+    void write_reg();
+    void read_reg();
+    void reset();
+    /* void read_data();
+     void read_volt();*/
+    void start_single_conversion();
+    float data_to_voltage(uint32_t data);
+
+private:
+    CN0398& dut;
+    const float default_offset_voltage = -0.000136;
+    float offset_voltage;
+    float default_calibration_ph[2][2] = {{4, 0.114451051}, {10, -0.0795903802}};
+    float calibration_ph[2][2];
+};
+
+
+#endif /* AD5270_DIAG_H_ */