Diff: examples/cn0391_example/main.cpp

Revision:

33:c3ec596a29c2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/cn0391_example/main.cpp	Mon Nov 07 16:27:12 2016 +0200
@@ -0,0 +1,88 @@
+/**
+*   @file     main.cpp
+*   @brief    Main file for the CN0357-example project
+*   @author   Analog Devices Inc.
+*
+* For support please go to:
+* Github: https://github.com/analogdevicesinc/mbed-adi
+* Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers
+* Product: www.analog.com/EVAL-CN0357-ARDZ
+* More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
+
+********************************************************************************
+* Copyright 2016(c) Analog Devices, Inc.
+*
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*  - Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*  - Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in
+*    the documentation and/or other materials provided with the
+*    distribution.
+*  - Neither the name of Analog Devices, Inc. nor the names of its
+*    contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*  - The use of this software may or may not infringe the patent rights
+*    of one or more patent holders.  This license does not release you
+*    from the requirement that you obtain separate licenses from these
+*    patent holders to use this software.
+*  - Use of the software either in source or binary form, must be run
+*    on or directly connected to an Analog Devices Inc. component.
+*
+* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+********************************************************************************/
+#include "mbed.h"
+#include "Thermocouple.h"
+#include "CN0391.h"
+
+Serial pc(SERIAL_TX, SERIAL_RX);
+
+int main()
+{
+    pc.baud(115200);
+    //Thermocouple *tcarray[4] = {new Thermocouple_Type_E, new Thermocouple_Type_E,new Thermocouple_Type_B,new Thermocouple_Type_B}
+    CN0391 cn0391(D10);
+    pc.printf("Reset the AD7124\r\n");
+    cn0391.reset();
+    wait_ms(500);
+    pc.printf("Init the AD7124\r\n");
+    cn0391.init();
+    wait_ms(500);
+    pc.printf("Done\r\n");
+
+    cn0391.set_thermocouple_type(CN0391::CHANNEL_P1, new Thermocouple_Type_E);
+    cn0391.set_thermocouple_type(CN0391::CHANNEL_P2, new Thermocouple_Type_B);
+    cn0391.set_thermocouple_type(CN0391::CHANNEL_P3, new Thermocouple_Type_J);
+    cn0391.set_thermocouple_type(CN0391::CHANNEL_P4, new Thermocouple_Type_S);
+
+
+
+    pc.printf("Calibration current for channel 1: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P1));
+    pc.printf("Calibration current for channel 2: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P2));
+    pc.printf("Calibration current for channel 3: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P3));
+    pc.printf("Calibration current for channel 4: %f\r\n", cn0391.calibrate(CN0391::CHANNEL_P4));
+    while(1) {
+        pc.printf("Thermocouple temperature channel 1: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P1));
+        pc.printf("Thermocouple temperature channel 2: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P2));
+        pc.printf("Thermocouple temperature channel 3: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P3));
+        pc.printf("Thermocouple temperature channel 4: %f\r\n", cn0391.read_channel(CN0391::CHANNEL_P4));
+
+        pc.printf("\r\n");
+
+        wait_ms(1000);
+    }
+    return 0;
+}