Diff: libraries/cn0357/cn0357.cpp

Revision:

3:1a8c14043a4e

Parent:

1:c1f0670bb370

Child:

4:5c1b28aff7e1

--- a/libraries/cn0357/cn0357.cpp	Thu Mar 31 17:42:48 2016 +0300
+++ b/libraries/cn0357/cn0357.cpp	Fri Apr 01 10:53:41 2016 +0300
@@ -1,11 +1,49 @@
 /**
-*   @file     CN0357.cpp
-*   @brief    Source file for CN0357 toxic gas sensor shield
-*   @version  V0.1
-*   @author   ADI
-*   @date     March 2015
-**/
+*   @file     cn0357.cpp
+*   @brief    Source file for CN0357
+*   @author   Analog Devices Inc.
+*
+* For support please go to:
+* Github: https://github.com/analogdevicesinc/mbed-adi
+* Support: https://ez.analog.com/community/linux-device-drivers/microcontroller-no-os-drivers
+* Product: www.analog.com/EVAL-CN0357-ARDZ
+* More: https://wiki.analog.com/resources/tools-software/mbed-drivers-all
 
+********************************************************************************
+* Copyright 2016(c) Analog Devices, Inc.
+*
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are met:
+*  - Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*  - Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in
+*    the documentation and/or other materials provided with the
+*    distribution.
+*  - Neither the name of Analog Devices, Inc. nor the names of its
+*    contributors may be used to endorse or promote products derived
+*    from this software without specific prior written permission.
+*  - The use of this software may or may not infringe the patent rights
+*    of one or more patent holders.  This license does not release you
+*    from the requirement that you obtain separate licenses from these
+*    patent holders to use this software.
+*  - Use of the software either in source or binary form, must be run
+*    on or directly connected to an Analog Devices Inc. component.
+*
+* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+********************************************************************************/
 
 #include "mbed.h"
 #include "AD7790.h"
@@ -35,12 +73,12 @@
  * @param mode_val - (optional)if jp is set to InternalADC, configures the mode register of the Internal ADC
  * @param filter_val - (optional)if jp is set to InternalADC, configures the filter register of the Internal ADC
  */
-void CN0357::init(float range, float sensitivity,JumperConfig_t jp,uint8_t mode_val, uint8_t filter_val)
+void CN0357::init(float range, float sensitivity, JumperConfig_t jp, uint8_t mode_val, uint8_t filter_val)
 {
     ad5270.frequency(500000);
     ad7790.frequency(500000);
 
-    float resistance = set_sensor_parameters(range,sensitivity);
+    float resistance = set_sensor_parameters(range, sensitivity);
     _rdac_init(resistance);
     if(jp == INTERNAL_AD7790) {
         _AD7790_init(mode_val, filter_val);