File content as of revision 7:b13d151712da:

Evaluation Boards/Products Supported
------------------------------------ 
EVAL-AD1202EBZ (ADE1202)


Overview
--------
These code files provide drivers to interface with ADE1202 and communicate with 
EVAL-ADE1202EBZ evaluation board. This code was developed and tested on SDP-K1 controller board 
https://os.mbed.com/platforms/SDP_K1/. 

Product details: https://www.analog.com/en/products/ad1202.html
                 
Eval board details: https://wiki.analog.com/resources/eval/user-guides/ade120x


Hardware Setup
--------------
Required: SDP-K1, EVAL-ADE1202, USB cable

Plug in the EVAL-AD1201EBZ board to SDP-K1 board using the SDP connector
Connect SDP-K1 board to the PC using the USB cable.

Code Explanation
------------------
The example program configures device U0 on EVAL-ADE1202EBZ. DOUT1 and DOUT2
are connected to interrupt pins on the SDP-K1. The UART interface transmits data
back to the PC. Refer to AN-2034 for details on register settings.

How to Get Started
------------------
Open Mbed online compiler. https://ide.mbed.com/compiler
Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD1201/
instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
Compile code. Drag and drop binary into SDP-K1 controller board. instructions 
here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
Open Tera Term, select 230400 baud rate, and the applicable COM port to see the 
list of options.

A detailed user guide on how to use SDP-K1 board on Mbed platform is available 
here: <<Mbed user guide>>


Notes
-----
If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.


License
-------
Copyright (c) 2019 Analog Devices, Inc.  All rights reserved.