Example Program for EVAL-AD7606
File content as of revision 7:054dbd5e1f45:
Evaluation Boards/Products Supported ------------------------------------ -Products supported: AD7606B, AD7606C, AD7605-4, AD7606-4, AD7606-6, AD7606-8, AD7608, AD7609 -EVAL-AD7606B-FMCZ Overview -------- This is an IIO ecosystem based firmware application to evalute the AD7606 family ADCs. The ADI developed ARM Mbed SDP-K1 controlled board acts as a target device, where firmware application is running. The ARM GCC/ARMC compiler is used for firmware development on ARM Mbed platform. The AD7606B-Eval board is interfaced with SDP-K1 (or any Arduino compatible board) controller board using on-board Arduino Headers. Hardware Setup -------------- Refer "Hardware Connections" section from below wiki page link: https://wiki.analog.com/resources/tools-software/product-support-software/ad7606_mbed_iio_application How to Get Started ------------------ Open Mbed online compiler. https://ide.mbed.com/compiler Import Code into compiler. Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v6.12/quick-start/build-with-the-online-compiler.html Compile code to generate binary file and then drag and drop binary into SDP-K1 controller board. Detailed instructions are here: https://os.mbed.com/docs/mbed-os/v6.12/build-tools/getting-your-program-on-your-board.html Refere project wiki page to find detailed guide on how to use firmware: https://wiki.analog.com/resources/tools-software/product-support-software/ad7606_mbed_iio_application Notes ----- Refere this page for latest documentation on Mbed-OS: https://os.mbed.com/docs/mbed-os/v6.12/introduction/index.html A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. Copyright (c) 2021 Analog Devices, Inc. All rights reserved.