Example Program for EVAL-AD7606
Dependencies: platform_drivers
Diff: README.txt
- Revision:
- 1:819ac9aa5667
- Parent:
- 0:3791805e8370
- Child:
- 6:32de160dce43
diff -r 3791805e8370 -r 819ac9aa5667 README.txt --- a/README.txt Thu Aug 06 19:49:32 2020 +0000 +++ b/README.txt Mon Oct 05 13:45:15 2020 +0530 @@ -1,40 +1,32 @@ Evaluation Boards/Products Supported ------------------------------------ -EVAL-AD1234 (AD1234) -EVAL-AD1256 (AD1256) -<< add more here >> +-Products supported: AD7606B, AD7606C, AD7605-4, AD7606-4, AD7606-6, AD7606-8, AD7608, AD7609 +-EVAL-AD7606B-FMCZ + Overview -------- -These code files provide drivers to interface with AD1234 and communicate with -EVAL-AD1234 board. This code was developed and tested on SDP-K1 controller board -https://os.mbed.com/platforms/SDP_K1/. - -Product details: https://www.analog.com/en/products/ad1234.html -Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD1234.html +This is an IIO ecosystem based firmware application to evalute the AD7606 family ADCs. +The ARM GCC compiler is used for firmware development on ARM Mbed platform. +The ADI developed ARM Mbed SDP-K1 controlled board acts as a target device, where firmware application is running. +The AD7606-Eval board is interfaced with SDP-K1 (or any Arduino compatible board) controller board using on-board Arduino Headers. Hardware Setup -------------- -Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external -clock supply. -Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled -controller board) using the SDP connector and screws. -Connect SDP-K1 board to the PC using the USB cable. +Refer "Hardware Connections" section from below wiki page link: +https://wiki.analog.com/resources/tools-software/product-support-software/ad7606_mbed_iio_application How to Get Started ------------------ Open Mbed online compiler. https://ide.mbed.com/compiler -Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD1234/ -instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html -Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions -here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html -Open Tera Term (or alternative), select 9600 baud rate, and the applicable COM port to see the -list of options. +Import Code into compiler from here. Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html +Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed +instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html -A detailed user guide on how to use SDP-K1 board on Mbed platform is available -here: https://wiki.analog.com/resources/tools-software/mbed +Refere project wiki page to find detailed guide on how to use firmware: +https://wiki.analog.com/resources/tools-software/product-support-software/ad7606_mbed_iio_application Notes @@ -43,40 +35,4 @@ A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. -License -------- -Copyright (c) 2019 Analog Devices, Inc. All rights reserved. - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright notice, - this list of conditions and the following disclaimer in the documentation - and/or other materials provided with the distribution. - - Modified versions of the software must be conspicuously marked as such. - - This software is licensed solely and exclusively for use with processors/products - manufactured by or for Analog Devices, Inc. - - This software may not be combined or merged with other code in any manner - that would cause the software to become subject to terms and conditions which - differ from those listed here. - - Neither the name of Analog Devices, Inc. nor the names of its contributors - may be used to endorse or promote products derived from this software without - specific prior written permission. - - The use of this software may or may not infringe the patent rights of one or - more patent holders. This license does not release you from the requirement - that you obtain separate licenses from these patent holders to use this software. - -THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, -TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, -INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF INTELLECTUAL -PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -2019-01-10-7CBSD SLA \ No newline at end of file +Copyright (c) 2020 Analog Devices, Inc. All rights reserved. \ No newline at end of file