Evaluation Boards/Products Supported ------------------------------------ EVAL-AD4111SDZ EVAL-AD4112SDZ EVAL-AD4114/15SDZ EVAL-AD7175-2 EVAL-AD7175-8 EVAL-AD7176-2 EVAL-AD7177-2 EVAL-AD7172-2 EVAL-AD7172-4 EVAL-AD7173-8SDZ Overview -------- These code files provide the console application and device libraries to interface with AD717x/AD411x EVAL boards. This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/ Product details: https://www.analog.com/en/products/ad4111.html https://www.analog.com/en/products/ad4112.html https://www.analog.com/en/products/ad4115.html https://www.analog.com/en/products/landing-pages/001/ad717x-family.html Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD4111.html (*Refer device datasheet page for the respective EVAL boards manual) User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad717x_ad411x_mbed_example Communication Protocol: SPI Hardware Setup -------------- Required: SDP-K1 (or alternative MBED enabled controller board), EVAL-AD4111SDZ (or other AD717x/AD411x supported EVAL board), USB cable. Plug in the EVAL board on SDP-K1 board (or any other Mbed enabled controller board) using the SDP connector and screws. Connect SDP-K1 board to the PC using the USB cable. How to Get Started ------------------ Open Mbed online compiler. https://ide.mbed.com/compiler Import Code into compiler. Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v6.8/quick-start/build-with-the-online-compiler.html Compile code to generate binary file and then drag and drop binary into SDP-K1 controller board. Detailed instructions are here: https://os.mbed.com/docs/mbed-os/v6.8/build-tools/getting-your-program-on-your-board.html Refer project wiki page to find detailed guide on how to use firmware: https://wiki.analog.com/resources/tools-software/product-support-software/ad5592r_mbed_example Notes ----- Refer this page for latest documentation on Mbed-OS: https://os.mbed.com/docs/mbed-os/v6.8/introduction/index.html A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. Copyright (c) 2020 Analog Devices, Inc. All rights reserved.