IIO firmware for the AD717x and AD411x family of devices.

Dependencies:   sdp_k1_sdram

README.txt

Committer:
Janani Sunil
Date:
20 months ago
Revision:
3:0dcba3253ec1
Parent:
1:f71de62b7179

File content as of revision 3:0dcba3253ec1:

Evaluation Boards/Products Supported
------------------------------------ 
EVAL-AD4111SDZ
EVAL-AD4112SDZ
EVAL-AD4114SDZ
EVAL-AD4115SDZ
EVAL-AD4116ASDZ
EVAL-AD7172-2SDZ
EVAL-AD7172-4SDZ
EVAL-AD7173-8SDZ
EVAL-AD7175-2SDZ
EVAL-AD7175-8SDZ
EVAL-AD7176-2SDZ
EVAL-AD7177-2SDZ

Overview
--------
This is a IIO based firmware application to evalute the AD717x/AD411x device.
This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/.
Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications.

Product details: https://www.analog.com/en/products/ad4111.html, https://www.analog.com/en/products/ad7172-2.html
Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD4111.html
User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad717x_mbed_iio_support
Communication Protocol: SPI


Hardware Setup
--------------
Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD717x/AD411x board and USB cable.
Plug in the EVAL-AD4111 board on SDP-K1 board (or any other Mbed enabled controller board) 
using the SDP-120 or Arduino or PMOD on-board connector (refer software wiki page to identify suitable interface).
Connect SDP-K1 board to the PC using the USB cable.


How to Get Started
------------------
Create an account with Keil Studio and log in: https://www.keil.arm.com/mbed/
Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD717x-AD411x-IIO/
Instructions on how to import code are here: https://developer.arm.com/documentation/102497/1-5/Create-or-import-a-project/Import-an-Mbed-project-from-a-URL
Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed 
instructions here: https://os.mbed.com/docs/mbed-os/v6.8/tools/getting-your-program-on-your-board.html
Open Tera Term (or alternative), select 230400 baud rate, and the applicable COM 
port to see the list of options.


Notes
-----
If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.


Copyright (c) 2022 Analog Devices, Inc.  All rights reserved.