Evaluation Boards/Products Supported
------------------------------------ 
EVAL-AD590-ADRZ

Overview
--------
This is a console application to evalute the AD590 device.
This code was developed and tested on SDP-K1 controller board: https://os.mbed.com/platforms/SDP_K1/
Use of Mbed platform allows code to port on other Mbed supported target boards with little or no modifications.

Product details: https://www.analog.com/en/products/ad590.html
Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD590.html
User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/eval-ad590ardz
Communication Protocol: SPI


Hardware Setup
--------------
Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD590-ARDZ board and USB cable.
Plug in the EVAL-AD590-ARDZ board on SDP-K1 board (or any other Mbed enabled controller board) 
using the Arduino connector (refer software wiki page to identify suitable interface).
Connect SDP-K1 board to the PC using the USB cable.


How to Get Started
------------------
Open Mbed online compiler. https://ide.mbed.com/compiler
Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD590/
Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v6.8/tools/importing-code.html
Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed 
instructions here: https://os.mbed.com/docs/mbed-os/v6.8/tools/getting-your-program-on-your-board.html
Open Tera Term (or alternative), select 230400 baud rate, and the applicable COM 
port to see the list of options.


Notes
-----
If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v6.8/tutorials/windows-serial-driver.html
A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html


Copyright (c) 2021-2022 Analog Devices, Inc.  All rights reserved.