Alcatel-Lucent IoT Development
LMiC LoRa Semtech + Nucleo version sending every 10secs
Dependents: LoRaWAN-test-10secs
Fork of
LMiC
by 
Alcatel-Lucent IoT Development
Diff: radio.cpp
- Revision:
- 0:62d1edcc13d1
- Child:
- 1:d3b7bde3995c
diff -r 000000000000 -r 62d1edcc13d1 radio.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/radio.cpp Thu Jan 22 12:50:49 2015 +0000
@@ -0,0 +1,1092 @@
+/*******************************************************************************
+ * Copyright (c) 2014 IBM Corporation.
+ * All rights reserved. This program and the accompanying materials
+ * are made available under the terms of the Eclipse Public License v1.0
+ * which accompanies this distribution, and is available at
+ * http://www.eclipse.org/legal/epl-v10.html
+ *
+ * Contributors:
+ * IBM Zurich Research Lab - initial API, implementation and documentation
+ * Semtech Apps Team - Modified to support the MBED sx1276 driver
+ * library.
+ * Possibility to use original or Semtech's MBED
+ * radio driver. The selection is done by setting
+ * USE_SMTC_RADIO_DRIVER preprocessing directive
+ * in lmic.h
+ *******************************************************************************/
+#include "lmic.h"
+
+#if USE_SMTC_RADIO_DRIVER
+#include "sx1276-hal.h"
+
+/*!
+ * Syncword for lora networks (nibbles swapped)
+ */
+#define LORA_MAC_SYNCWORD 0x34
+
+/*
+ * Callback functions prototypes
+ */
+/*!
+ * @brief Function to be executed on Radio Tx Done event
+ */
+void OnTxDone( void );
+
+/*!
+ * @brief Function to be executed on Radio Rx Done event
+ */
+void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr );
+
+/*!
+ * @brief Function executed on Radio Tx Timeout event
+ */
+void OnTxTimeout( void );
+
+/*!
+ * @brief Function executed on Radio Rx Timeout event
+ */
+void OnRxTimeout( void );
+
+/*!
+ * @brief Function executed on Radio Rx Error event
+ */
+void OnRxError( void );
+
+/*!
+ * @brief Function executed on Radio Fhss Change Channel event
+ */
+void OnFhssChangeChannel( uint8_t channelIndex );
+
+/*!
+ * @brief Function executed on CAD Done event
+ */
+void OnCadDone( void );
+
+/*
+ * Radio object declraration
+ */
+SX1276MB1xAS Radio( OnTxDone, OnTxTimeout, OnRxDone, OnRxTimeout, OnRxError, NULL, NULL );
+
+static const u2_t LORA_RXDONE_FIXUP[] = {
+ [FSK] = us2osticks(0), // ( 0 ticks)
+ [SF7] = us2osticks(0), // ( 0 ticks)
+ [SF8] = us2osticks(1648), // ( 54 ticks)
+ [SF9] = us2osticks(3265), // ( 107 ticks)
+ [SF10] = us2osticks(7049), // ( 231 ticks)
+ [SF11] = us2osticks(13641), // ( 447 ticks)
+ [SF12] = us2osticks(31189), // (1022 ticks)
+};
+
+void OnTxDone( void )
+{
+ ostime_t now = os_getTime( );
+ // save exact tx time
+ LMIC.txend = now - us2osticks( 43 ); // TXDONE FIXUP
+
+ // go from stanby to sleep
+ Radio.Sleep( );
+ // run os job (use preset func ptr)
+ os_setCallback( &LMIC.osjob, LMIC.osjob.func );
+}
+
+void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr )
+{
+ ostime_t now = os_getTime( );
+ // save exact rx time
+ LMIC.rxtime = now - LORA_RXDONE_FIXUP[getSf( LMIC.rps )];
+ // read the PDU and inform the MAC that we received something
+ LMIC.dataLen = size;
+ // now read the FIFO
+ memcpy( LMIC.frame, payload, size );
+ // read rx quality parameters
+ LMIC.rxq.snr = snr; // SNR [dB] * 4
+ LMIC.rxq.rssi = rssi; // RSSI [dBm] (-196...+63)
+
+ // go from stanby to sleep
+ Radio.Sleep( );
+ // run os job (use preset func ptr)
+ os_setCallback( &LMIC.osjob, LMIC.osjob.func );
+}
+
+void OnTxTimeout( void )
+{
+ ostime_t now = os_getTime( );
+
+ // indicate error
+
+ // go from stanby to sleep
+ Radio.Sleep( );
+ // run os job (use preset func ptr)
+ os_setCallback( &LMIC.osjob, LMIC.osjob.func );
+}
+
+void OnRxTimeout( void )
+{
+ ostime_t now = os_getTime( );
+ // indicate timeout
+ LMIC.dataLen = 0;
+
+ // go from stanby to sleep
+ Radio.Sleep( );
+ // run os job (use preset func ptr)
+ os_setCallback( &LMIC.osjob, LMIC.osjob.func );
+}
+
+void OnRxError( void )
+{
+ ostime_t now = os_getTime( );
+
+ // indicate error
+ LMIC.dataLen = 0;
+
+ // go from stanby to sleep
+ Radio.Sleep( );
+ // run os job (use preset func ptr)
+ os_setCallback( &LMIC.osjob, LMIC.osjob.func );
+}
+
+/*!
+ * LMIC API implementation
+ */
+// RADIO STATE
+// (initialized by radio_init( ), used by radio_rand1( ))
+static u1_t randbuf[16];
+
+// get random seed from wideband noise rssi
+void radio_init( void )
+{
+ hal_disableIRQs( );
+
+ // seed 15-byte randomness via noise rssi
+ // Set LoRa modem ON
+ Radio.SetModem( MODEM_LORA );
+ // Disable LoRa modem interrupts
+ Radio.Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT |
+ RFLR_IRQFLAGS_RXDONE |
+ RFLR_IRQFLAGS_PAYLOADCRCERROR |
+ RFLR_IRQFLAGS_VALIDHEADER |
+ RFLR_IRQFLAGS_TXDONE |
+ RFLR_IRQFLAGS_CADDONE |
+ RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL |
+ RFLR_IRQFLAGS_CADDETECTED );
+
+ // Set radio in continuous reception
+ Radio.Rx( 0 );
+
+ for( int i = 1; i < 16; i++ )
+ {
+ for( int j = 0; j < 8; j++ )
+ {
+ u1_t b; // wait for two non-identical subsequent least-significant bits
+ while( ( b = Radio.Read( REG_LR_RSSIWIDEBAND ) & 0x01 ) == ( Radio.Read( REG_LR_RSSIWIDEBAND ) & 0x01 ) );
+ randbuf[i] = ( randbuf[i] << 1 ) | b;
+ }
+ }
+ randbuf[0] = 16; // set initial index
+
+ // Change LoRa modem SyncWord
+ Radio.Write( REG_LR_SYNCWORD, LORA_MAC_SYNCWORD );
+
+ Radio.Sleep( );
+
+ hal_enableIRQs( );
+}
+
+// return next random byte derived from seed buffer
+// (buf[0] holds index of next byte to be returned)
+u1_t radio_rand1( void )
+{
+ u1_t i = randbuf[0];
+ ASSERT( i != 0 );
+ if( i == 16 )
+ {
+ os_aes( AES_ENC, randbuf, 16 ); // encrypt seed with any key
+ i = 0;
+ }
+ u1_t v = randbuf[i++];
+ randbuf[0] = i;
+ return v;
+}
+
+void os_radio( u1_t mode )
+{
+ hal_disableIRQs( );
+ switch( mode )
+ {
+ case RADIO_RST:
+ // put radio to sleep
+ Radio.Sleep( );
+ break;
+
+ case RADIO_TX:
+ // transmit frame now
+ //ASSERT( Radio.GetState( ) == IDLE );
+
+ Radio.SetChannel( LMIC.freq );
+ if( getSf( LMIC.rps ) == FSK )
+ { // FSK modem
+ Radio.SetTxConfig( MODEM_FSK, LMIC.txpow, 25e3, 0, 50e3, 0, 5, false, true, 0, 0, false, 3e6 );
+ }
+ else
+ { // LoRa modem
+
+ Radio.SetTxConfig( MODEM_LORA, LMIC.txpow, 0, getBw( LMIC.rps ), getSf( LMIC.rps ) + 6, getCr( LMIC.rps ) + 1, 8, getIh( LMIC.rps ) ? true : false, ( getNocrc(LMIC.rps) == 0 ) ? true : false, 0, 0, false, 3e6 );
+ }
+
+ //starttx( ); // buf=LMIC.frame, len=LMIC.dataLen
+ Radio.Send( LMIC.frame, LMIC.dataLen );
+ break;
+
+ case RADIO_RX:
+ // receive frame now (exactly at rxtime)
+ //ASSERT( Radio.GetState( ) == IDLE );
+
+ Radio.SetChannel( LMIC.freq );
+ if( getSf( LMIC.rps ) == FSK )
+ { // FSK modem
+ //Radio.SetRxConfig( MODEM_FSK, 50e3, 50e3, 0, 83.333e3, 5, 0, false, 0, true, 0, 0, false, false );
+ Radio.SetRxConfig( MODEM_FSK, 50e3, 50e3, 0, 83.333e3, 5, 0, false, 0, true, 0, 0, false, true );
+ }
+ else
+ { // LoRa modem
+
+ Radio.SetRxConfig( MODEM_LORA, getBw( LMIC.rps ), getSf( LMIC.rps ) + 6, getCr( LMIC.rps ) + 1, 0, 8, LMIC.rxsyms, getIh( LMIC.rps ) ? true : false, getIh(LMIC.rps), ( getNocrc(LMIC.rps) == 0 ) ? true : false, 0, 0, true, false );
+ }
+
+ // now instruct the radio to receive
+ hal_waitUntil( LMIC.rxtime ); // busy wait until exact rx time
+
+ //startrx( RXMODE_SINGLE ); // buf = LMIC.frame, time = LMIC.rxtime, timeout=LMIC.rxsyms
+ if( getSf( LMIC.rps ) == FSK )
+ { // FSK modem
+ Radio.Rx( 50e3 ); // Max Rx window 50 ms
+ }
+ else
+ { // LoRa modem
+ Radio.Rx( 3e6 ); // Max Rx window 3 seconds
+ }
+ break;
+
+ case RADIO_RXON:
+ // start scanning for beacon now
+
+ //ASSERT( Radio.GetState( ) == IDLE );
+
+ Radio.SetChannel( LMIC.freq );
+ if( getSf( LMIC.rps ) == FSK )
+ { // FSK modem
+ Radio.SetRxConfig( MODEM_FSK, 50e3, 50e3, 0, 83.333e3, 5, 0, false, 0, true, 0, 0, false, true );
+ }
+ else
+ { // LoRa modem
+ Radio.SetRxConfig( MODEM_LORA, getBw( LMIC.rps ), getSf( LMIC.rps ) + 6, getCr( LMIC.rps ) + 1, 0, 8, LMIC.rxsyms, getIh( LMIC.rps ) ? true : false, getIh(LMIC.rps), ( getNocrc(LMIC.rps) == 0 ) ? true : false, 0, 0, true, true );
+ }
+
+ //startrx( RXMODE_SCAN) ; // buf = LMIC.frame
+ Radio.Rx( 0 );
+ break;
+ }
+ hal_enableIRQs( );
+}
+
+#else
+
+// ----------------------------------------
+// Registers Mapping
+#define RegFifo 0x00 // common
+#define RegOpMode 0x01 // common
+#define FSKRegBitrateMsb 0x02
+#define FSKRegBitrateLsb 0x03
+#define FSKRegFdevMsb 0x04
+#define FSKRegFdevLsb 0x05
+#define RegFrfMsb 0x06 // common
+#define RegFrfMid 0x07 // common
+#define RegFrfLsb 0x08 // common
+#define RegPaConfig 0x09 // common
+#define RegPaRamp 0x0A // common
+#define RegOcp 0x0B // common
+#define RegLna 0x0C // common
+#define FSKRegRxConfig 0x0D
+#define LORARegFifoAddrPtr 0x0D
+#define FSKRegRssiConfig 0x0E
+#define LORARegFifoTxBaseAddr 0x0E
+#define FSKRegRssiCollision 0x0F
+#define LORARegFifoRxBaseAddr 0x0F
+#define FSKRegRssiThresh 0x10
+#define LORARegFifoRxCurrentAddr 0x10
+#define FSKRegRssiValue 0x11
+#define LORARegIrqFlagsMask 0x11
+#define FSKRegRxBw 0x12
+#define LORARegIrqFlags 0x12
+#define FSKRegAfcBw 0x13
+#define LORARegRxNbBytes 0x13
+#define FSKRegOokPeak 0x14
+#define LORARegRxHeaderCntValueMsb 0x14
+#define FSKRegOokFix 0x15
+#define LORARegRxHeaderCntValueLsb 0x15
+#define FSKRegOokAvg 0x16
+#define LORARegRxPacketCntValueMsb 0x16
+#define LORARegRxpacketCntValueLsb 0x17
+#define LORARegModemStat 0x18
+#define LORARegPktSnrValue 0x19
+#define FSKRegAfcFei 0x1A
+#define LORARegPktRssiValue 0x1A
+#define FSKRegAfcMsb 0x1B
+#define LORARegRssiValue 0x1B
+#define FSKRegAfcLsb 0x1C
+#define LORARegHopChannel 0x1C
+#define FSKRegFeiMsb 0x1D
+#define LORARegModemConfig1 0x1D
+#define FSKRegFeiLsb 0x1E
+#define LORARegModemConfig2 0x1E
+#define FSKRegPreambleDetect 0x1F
+#define LORARegSymbTimeoutLsb 0x1F
+#define FSKRegRxTimeout1 0x20
+#define LORARegPreambleMsb 0x20
+#define FSKRegRxTimeout2 0x21
+#define LORARegPreambleLsb 0x21
+#define FSKRegRxTimeout3 0x22
+#define LORARegPayloadLength 0x22
+#define FSKRegRxDelay 0x23
+#define LORARegPayloadMaxLength 0x23
+#define FSKRegOsc 0x24
+#define LORARegHopPeriod 0x24
+#define FSKRegPreambleMsb 0x25
+#define LORARegFifoRxByteAddr 0x25
+#define LORARegModemConfig3 0x26
+#define FSKRegPreambleLsb 0x26
+#define FSKRegSyncConfig 0x27
+#define LORARegFeiMsb 0x28
+#define FSKRegSyncValue1 0x28
+#define LORAFeiMib 0x29
+#define FSKRegSyncValue2 0x29
+#define LORARegFeiLsb 0x2A
+#define FSKRegSyncValue3 0x2A
+#define FSKRegSyncValue4 0x2B
+#define LORARegRssiWideband 0x2C
+#define FSKRegSyncValue5 0x2C
+#define FSKRegSyncValue6 0x2D
+#define FSKRegSyncValue7 0x2E
+#define FSKRegSyncValue8 0x2F
+#define FSKRegPacketConfig1 0x30
+#define FSKRegPacketConfig2 0x31
+#define LORARegDetectOptimize 0x31
+#define FSKRegPayloadLength 0x32
+#define FSKRegNodeAdrs 0x33
+#define LORARegInvertIQ 0x33
+#define FSKRegBroadcastAdrs 0x34
+#define FSKRegFifoThresh 0x35
+#define FSKRegSeqConfig1 0x36
+#define FSKRegSeqConfig2 0x37
+#define LORARegDetectionThreshold 0x37
+#define FSKRegTimerResol 0x38
+#define FSKRegTimer1Coef 0x39
+#define LORARegSyncWord 0x39
+#define FSKRegTimer2Coef 0x3A
+#define FSKRegImageCal 0x3B
+#define FSKRegTemp 0x3C
+#define FSKRegLowBat 0x3D
+#define FSKRegIrqFlags1 0x3E
+#define FSKRegIrqFlags2 0x3F
+#define RegDioMapping1 0x40 // common
+#define RegDioMapping2 0x41 // common
+#define RegVersion 0x42 // common
+// #define RegAgcRef 0x43 // common
+// #define RegAgcThresh1 0x44 // common
+// #define RegAgcThresh2 0x45 // common
+// #define RegAgcThresh3 0x46 // common
+// #define RegPllHop 0x4B // common
+// #define RegTcxo 0x58 // common
+#define RegPaDac 0x5A // common
+// #define RegPll 0x5C // common
+// #define RegPllLowPn 0x5E // common
+// #define RegFormerTemp 0x6C // common
+// #define RegBitRateFrac 0x70 // common
+
+// ----------------------------------------
+// spread factors and mode for RegModemConfig2
+#define SX1272_MC2_FSK 0x00
+#define SX1272_MC2_SF7 0x70
+#define SX1272_MC2_SF8 0x80
+#define SX1272_MC2_SF9 0x90
+#define SX1272_MC2_SF10 0xA0
+#define SX1272_MC2_SF11 0xB0
+#define SX1272_MC2_SF12 0xC0
+// bandwidth for RegModemConfig1
+#define SX1272_MC1_BW_125 0x00
+#define SX1272_MC1_BW_250 0x40
+#define SX1272_MC1_BW_500 0x80
+// coding rate for RegModemConfig1
+#define SX1272_MC1_CR_4_5 0x08
+#define SX1272_MC1_CR_4_6 0x10
+#define SX1272_MC1_CR_4_7 0x18
+#define SX1272_MC1_CR_4_8 0x20
+#define SX1272_MC1_IMPLICIT_HEADER_MODE_ON 0x04 // required for receive
+#define SX1272_MC1_RX_PAYLOAD_CRCON 0x02
+#define SX1272_MC1_LOW_DATA_RATE_OPTIMIZE 0x01 // mandated for SF11 and SF12
+// transmit power configuration for RegPaConfig
+#define SX1272_PAC_PA_SELECT_PA_BOOST 0x80
+#define SX1272_PAC_PA_SELECT_RFIO_PIN 0x00
+
+
+// sx1276 RegModemConfig1
+#define SX1276_MC1_BW_125 0x70
+#define SX1276_MC1_BW_250 0x80
+#define SX1276_MC1_BW_500 0x90
+#define SX1276_MC1_CR_4_5 0x02
+#define SX1276_MC1_CR_4_6 0x04
+#define SX1276_MC1_CR_4_7 0x06
+#define SX1276_MC1_CR_4_8 0x08
+
+#define SX1276_MC1_IMPLICIT_HEADER_MODE_ON 0x01
+
+// sx1276 RegModemConfig2
+#define SX1276_MC2_RX_PAYLOAD_CRCON 0x04
+
+// sx1276 RegModemConfig3
+#define SX1276_MC3_LOW_DATA_RATE_OPTIMIZE 0x08
+#define SX1276_MC3_AGCAUTO 0x04
+
+// preamble for lora networks (nibbles swapped)
+#define LORA_MAC_PREAMBLE 0x34
+
+#define RXLORA_RXMODE_RSSI_REG_MODEM_CONFIG1 0x0A
+#ifdef CFG_sx1276_radio
+#define RXLORA_RXMODE_RSSI_REG_MODEM_CONFIG2 0x70
+#elif CFG_sx1272_radio
+#define RXLORA_RXMODE_RSSI_REG_MODEM_CONFIG2 0x74
+#endif
+
+
+
+// ----------------------------------------
+// Constants for radio registers
+#define OPMODE_LORA 0x80
+#define OPMODE_MASK 0x07
+#define OPMODE_SLEEP 0x00
+#define OPMODE_STANDBY 0x01
+#define OPMODE_FSTX 0x02
+#define OPMODE_TX 0x03
+#define OPMODE_FSRX 0x04
+#define OPMODE_RX 0x05
+#define OPMODE_RX_SINGLE 0x06
+#define OPMODE_CAD 0x07
+
+// ----------------------------------------
+// Bits masking the corresponding IRQs from the radio
+#define IRQ_LORA_RXTOUT_MASK 0x80
+#define IRQ_LORA_RXDONE_MASK 0x40
+#define IRQ_LORA_CRCERR_MASK 0x20
+#define IRQ_LORA_HEADER_MASK 0x10
+#define IRQ_LORA_TXDONE_MASK 0x08
+#define IRQ_LORA_CDDONE_MASK 0x04
+#define IRQ_LORA_FHSSCH_MASK 0x02
+#define IRQ_LORA_CDDETD_MASK 0x01
+
+#define IRQ_FSK1_MODEREADY_MASK 0x80
+#define IRQ_FSK1_RXREADY_MASK 0x40
+#define IRQ_FSK1_TXREADY_MASK 0x20
+#define IRQ_FSK1_PLLLOCK_MASK 0x10
+#define IRQ_FSK1_RSSI_MASK 0x08
+#define IRQ_FSK1_TIMEOUT_MASK 0x04
+#define IRQ_FSK1_PREAMBLEDETECT_MASK 0x02
+#define IRQ_FSK1_SYNCADDRESSMATCH_MASK 0x01
+#define IRQ_FSK2_FIFOFULL_MASK 0x80
+#define IRQ_FSK2_FIFOEMPTY_MASK 0x40
+#define IRQ_FSK2_FIFOLEVEL_MASK 0x20
+#define IRQ_FSK2_FIFOOVERRUN_MASK 0x10
+#define IRQ_FSK2_PACKETSENT_MASK 0x08
+#define IRQ_FSK2_PAYLOADREADY_MASK 0x04
+#define IRQ_FSK2_CRCOK_MASK 0x02
+#define IRQ_FSK2_LOWBAT_MASK 0x01
+
+// ----------------------------------------
+// DIO function mappings D0D1D2D3
+#define MAP_DIO0_LORA_RXDONE 0x00 // 00------
+#define MAP_DIO0_LORA_TXDONE 0x40 // 01------
+#define MAP_DIO1_LORA_RXTOUT 0x00 // --00----
+#define MAP_DIO1_LORA_NOP 0x30 // --11----
+#define MAP_DIO2_LORA_NOP 0xC0 // ----11--
+
+#define MAP_DIO0_FSK_READY 0x00 // 00------ (packet sent / payload ready)
+#define MAP_DIO1_FSK_NOP 0x30 // --11----
+#define MAP_DIO2_FSK_TXNOP 0x04 // ----01--
+#define MAP_DIO2_FSK_TIMEOUT 0x08 // ----10--
+
+
+// FSK IMAGECAL defines
+#define RF_IMAGECAL_AUTOIMAGECAL_MASK 0x7F
+#define RF_IMAGECAL_AUTOIMAGECAL_ON 0x80
+#define RF_IMAGECAL_AUTOIMAGECAL_OFF 0x00 // Default
+
+#define RF_IMAGECAL_IMAGECAL_MASK 0xBF
+#define RF_IMAGECAL_IMAGECAL_START 0x40
+
+#define RF_IMAGECAL_IMAGECAL_RUNNING 0x20
+#define RF_IMAGECAL_IMAGECAL_DONE 0x00 // Default
+
+
+// RADIO STATE
+// (initialized by radio_init(), used by radio_rand1())
+static u1_t randbuf[16];
+
+
+#ifdef CFG_sx1276_radio
+#define LNA_RX_GAIN (0x20|0x1)
+#elif CFG_sx1272_radio
+#define LNA_RX_GAIN (0x20|0x03)
+#else
+#error Missing CFG_sx1272_radio/CFG_sx1276_radio
+#endif
+
+static void writeReg (u1_t addr, u1_t data ) {
+ hal_pin_nss(0);
+ hal_spi(addr | 0x80);
+ hal_spi(data);
+ hal_pin_nss(1);
+}
+
+static u1_t readReg (u1_t addr) {
+ hal_pin_nss(0);
+ hal_spi(addr & 0x7F);
+ u1_t val = hal_spi(0x00);
+ hal_pin_nss(1);
+ return val;
+}
+
+static void writeBuf (u1_t addr, xref2u1_t buf, u1_t len) {
+ hal_pin_nss(0);
+ hal_spi(addr | 0x80);
+ for (u1_t i=0; i<len; i++) {
+ hal_spi(buf[i]);
+ }
+ hal_pin_nss(1);
+}
+
+static void readBuf (u1_t addr, xref2u1_t buf, u1_t len) {
+ hal_pin_nss(0);
+ hal_spi(addr & 0x7F);
+ for (u1_t i=0; i<len; i++) {
+ buf[i] = hal_spi(0x00);
+ }
+ hal_pin_nss(1);
+}
+
+static void opmode (u1_t mode) {
+ writeReg(RegOpMode, (readReg(RegOpMode) & ~OPMODE_MASK) | mode);
+}
+
+static void opmodeLora(void) {
+ u1_t u = OPMODE_LORA;
+#ifdef CFG_sx1276_radio
+ u |= 0x8; // TBD: sx1276 high freq
+#endif
+ writeReg(RegOpMode, u);
+}
+
+static void opmodeFSK(void) {
+ u1_t u = 0;
+#ifdef CFG_sx1276_radio
+ u |= 0x8; // TBD: sx1276 high freq
+#endif
+ writeReg(RegOpMode, u);
+}
+
+// configure LoRa modem (cfg1, cfg2)
+static void configLoraModem (void) {
+ sf_t sf = getSf(LMIC.rps);
+
+#ifdef CFG_sx1276_radio
+ u1_t mc1 = 0, mc2 = 0, mc3 = 0;
+
+ switch (getBw(LMIC.rps)) {
+ case BW125: mc1 |= SX1276_MC1_BW_125; break;
+ case BW250: mc1 |= SX1276_MC1_BW_250; break;
+ case BW500: mc1 |= SX1276_MC1_BW_500; break;
+ default:
+ ASSERT(0);
+ }
+ switch( getCr(LMIC.rps) ) {
+ case CR_4_5: mc1 |= SX1276_MC1_CR_4_5; break;
+ case CR_4_6: mc1 |= SX1276_MC1_CR_4_6; break;
+ case CR_4_7: mc1 |= SX1276_MC1_CR_4_7; break;
+ case CR_4_8: mc1 |= SX1276_MC1_CR_4_8; break;
+ default:
+ ASSERT(0);
+ }
+
+ if (getIh(LMIC.rps)) {
+ mc1 |= SX1276_MC1_IMPLICIT_HEADER_MODE_ON;
+ writeReg(LORARegPayloadLength, getIh(LMIC.rps)); // required length
+ }
+ // set ModemConfig1
+ writeReg(LORARegModemConfig1, mc1);
+
+ mc2 = (SX1272_MC2_SF7 + ((sf-1)<<4));
+ if (getNocrc(LMIC.rps) == 0) {
+ mc2 |= SX1276_MC2_RX_PAYLOAD_CRCON;
+ }
+ writeReg(LORARegModemConfig2, mc2);
+
+ mc3 = SX1276_MC3_AGCAUTO;
+ if (sf == SF11 || sf == SF12) {
+ mc3 |= SX1276_MC3_LOW_DATA_RATE_OPTIMIZE;
+ }
+ writeReg(LORARegModemConfig3, mc3);
+#elif CFG_sx1272_radio
+ u1_t mc1 = (getBw(LMIC.rps)<<6);
+
+ switch( getCr(LMIC.rps) ) {
+ case CR_4_5: mc1 |= SX1272_MC1_CR_4_5; break;
+ case CR_4_6: mc1 |= SX1272_MC1_CR_4_6; break;
+ case CR_4_7: mc1 |= SX1272_MC1_CR_4_7; break;
+ case CR_4_8: mc1 |= SX1272_MC1_CR_4_8; break;
+ }
+
+ if (sf == SF11 || sf == SF12) {
+ mc1 |= SX1272_MC1_LOW_DATA_RATE_OPTIMIZE;
+ }
+
+ if (getNocrc(LMIC.rps) == 0) {
+ mc1 |= SX1272_MC1_RX_PAYLOAD_CRCON;
+ }
+
+ if (getIh(LMIC.rps)) {
+ mc1 |= SX1272_MC1_IMPLICIT_HEADER_MODE_ON;
+ writeReg(LORARegPayloadLength, getIh(LMIC.rps)); // required length
+ }
+ // set ModemConfig1
+ writeReg(LORARegModemConfig1, mc1);
+
+ // set ModemConfig2 (sf, AgcAutoOn=1 SymbTimeoutHi=00)
+ writeReg(LORARegModemConfig2, (SX1272_MC2_SF7 + ((sf-1)<<4)) | 0x04);
+#else
+#error Missing CFG_sx1272_radio/CFG_sx1276_radio
+#endif /* CFG_sx1272_radio */
+}
+
+static void configChannel (void) {
+ // set frequency: FQ = (FRF * 32 Mhz) / (2 ^ 19)
+ u8_t frf = ((u8_t)LMIC.freq << 19) / 32000000;
+ writeReg(RegFrfMsb, (u1_t)(frf>>16));
+ writeReg(RegFrfMid, (u1_t)(frf>> 8));
+ writeReg(RegFrfLsb, (u1_t)(frf>> 0));
+}
+
+
+
+static void configPower (void) {
+#ifdef CFG_sx1276_radio
+ // no boost used for now
+ s1_t pw = (s1_t)LMIC.txpow;
+ if(pw > 14) {
+ pw = 14;
+ } else if(pw < -1) {
+ pw = -1;
+ }
+ // check board type for BOOST pin
+ writeReg(RegPaConfig, (u1_t)(0x00|((pw+1)&0xf)));
+ writeReg(RegPaDac, readReg(RegPaDac)|0x4);
+
+#elif CFG_sx1272_radio
+ // set PA config (2-17 dBm using PA_BOOST)
+ s1_t pw = (s1_t)LMIC.txpow;
+ if(pw > 17) {
+ pw = 17;
+ } else if(pw < 2) {
+ pw = 2;
+ }
+ writeReg(RegPaConfig, (u1_t)(0x80|(pw-2)));
+#else
+#error Missing CFG_sx1272_radio/CFG_sx1276_radio
+#endif /* CFG_sx1272_radio */
+}
+
+static void txfsk (void) {
+ // select FSK modem (from sleep mode)
+ writeReg(RegOpMode, 0x10); // FSK, BT=0.5
+ ASSERT(readReg(RegOpMode) == 0x10);
+ // enter standby mode (required for FIFO loading))
+ opmode(OPMODE_STANDBY);
+ // set bitrate
+ writeReg(FSKRegBitrateMsb, 0x02); // 50kbps
+ writeReg(FSKRegBitrateLsb, 0x80);
+ // set frequency deviation
+ writeReg(FSKRegFdevMsb, 0x01); // +/- 25kHz
+ writeReg(FSKRegFdevLsb, 0x99);
+ // frame and packet handler settings
+ writeReg(FSKRegPreambleMsb, 0x00);
+ writeReg(FSKRegPreambleLsb, 0x05);
+ writeReg(FSKRegSyncConfig, 0x12);
+ writeReg(FSKRegPacketConfig1, 0xD0);
+ writeReg(FSKRegPacketConfig2, 0x40);
+ writeReg(FSKRegSyncValue1, 0xC1);
+ writeReg(FSKRegSyncValue2, 0x94);
+ writeReg(FSKRegSyncValue3, 0xC1);
+ // configure frequency
+ configChannel();
+ // configure output power
+ configPower();
+
+ // set the IRQ mapping DIO0=PacketSent DIO1=NOP DIO2=NOP
+ writeReg(RegDioMapping1, MAP_DIO0_FSK_READY|MAP_DIO1_FSK_NOP|MAP_DIO2_FSK_TXNOP);
+
+ // initialize the payload size and address pointers
+ writeReg(FSKRegPayloadLength, LMIC.dataLen+1); // (insert length byte into payload))
+
+ // download length byte and buffer to the radio FIFO
+ writeReg(RegFifo, LMIC.dataLen);
+ writeBuf(RegFifo, LMIC.frame, LMIC.dataLen);
+
+ // enable antenna switch for TX
+ hal_pin_rxtx(1);
+
+ // now we actually start the transmission
+ opmode(OPMODE_TX);
+}
+
+static void txlora (void) {
+ // select LoRa modem (from sleep mode)
+ //writeReg(RegOpMode, OPMODE_LORA);
+ opmodeLora();
+ ASSERT((readReg(RegOpMode) & OPMODE_LORA) != 0);
+
+ // enter standby mode (required for FIFO loading))
+ opmode(OPMODE_STANDBY);
+ // configure LoRa modem (cfg1, cfg2)
+ configLoraModem();
+ // configure frequency
+ configChannel();
+ // configure output power
+ writeReg(RegPaRamp, (readReg(RegPaRamp) & 0xF0) | 0x08); // set PA ramp-up time 50 uSec
+ configPower();
+ // set sync word
+ writeReg(LORARegSyncWord, LORA_MAC_PREAMBLE);
+
+ // set the IRQ mapping DIO0=TxDone DIO1=NOP DIO2=NOP
+ writeReg(RegDioMapping1, MAP_DIO0_LORA_TXDONE|MAP_DIO1_LORA_NOP|MAP_DIO2_LORA_NOP);
+ // clear all radio IRQ flags
+ writeReg(LORARegIrqFlags, 0xFF);
+ // mask all IRQs but TxDone
+ writeReg(LORARegIrqFlagsMask, ~IRQ_LORA_TXDONE_MASK);
+
+ // initialize the payload size and address pointers
+ writeReg(LORARegFifoTxBaseAddr, 0x00);
+ writeReg(LORARegFifoAddrPtr, 0x00);
+ writeReg(LORARegPayloadLength, LMIC.dataLen);
+
+ // download buffer to the radio FIFO
+ writeBuf(RegFifo, LMIC.frame, LMIC.dataLen);
+
+ // enable antenna switch for TX
+ hal_pin_rxtx(1);
+
+ // now we actually start the transmission
+ opmode(OPMODE_TX);
+}
+
+// start transmitter (buf=LMIC.frame, len=LMIC.dataLen)
+static void starttx (void) {
+ ASSERT( (readReg(RegOpMode) & OPMODE_MASK) == OPMODE_SLEEP );
+ if(getSf(LMIC.rps) == FSK) { // FSK modem
+ txfsk();
+ } else { // LoRa modem
+ txlora();
+ }
+ // the radio will go back to STANDBY mode as soon as the TX is finished
+ // the corresponding IRQ will inform us about completion.
+}
+
+enum { RXMODE_SINGLE, RXMODE_SCAN, RXMODE_RSSI };
+
+static const u1_t rxlorairqmask[] = {
+ [RXMODE_SINGLE] = IRQ_LORA_RXDONE_MASK|IRQ_LORA_RXTOUT_MASK,
+ [RXMODE_SCAN] = IRQ_LORA_RXDONE_MASK,
+ [RXMODE_RSSI] = 0x00,
+};
+
+// start LoRa receiver (time=LMIC.rxtime, timeout=LMIC.rxsyms, result=LMIC.frame[LMIC.dataLen])
+static void rxlora (u1_t rxmode) {
+ // select LoRa modem (from sleep mode)
+ opmodeLora();
+ ASSERT((readReg(RegOpMode) & OPMODE_LORA) != 0);
+ // enter standby mode (warm up))
+ opmode(OPMODE_STANDBY);
+ // don't use MAC settings at startup
+ if(rxmode == RXMODE_RSSI) { // use fixed settings for rssi scan
+ writeReg(LORARegModemConfig1, RXLORA_RXMODE_RSSI_REG_MODEM_CONFIG1);
+ writeReg(LORARegModemConfig2, RXLORA_RXMODE_RSSI_REG_MODEM_CONFIG2);
+ } else { // single or continuous rx mode
+ // configure LoRa modem (cfg1, cfg2)
+ configLoraModem();
+ // configure frequency
+ configChannel();
+ }
+ // set LNA gain
+ writeReg(RegLna, LNA_RX_GAIN);
+ // set max payload size
+ writeReg(LORARegPayloadMaxLength, 64);
+ // use inverted I/Q signal (prevent mote-to-mote communication)
+ writeReg(LORARegInvertIQ, readReg(LORARegInvertIQ)|(1<<6));
+ // set symbol timeout (for single rx)
+ writeReg(LORARegSymbTimeoutLsb, LMIC.rxsyms);
+ // set sync word
+ writeReg(LORARegSyncWord, LORA_MAC_PREAMBLE);
+
+ // configure DIO mapping DIO0=RxDone DIO1=RxTout DIO2=NOP
+ writeReg(RegDioMapping1, MAP_DIO0_LORA_RXDONE|MAP_DIO1_LORA_RXTOUT|MAP_DIO2_LORA_NOP);
+ // clear all radio IRQ flags
+ writeReg(LORARegIrqFlags, 0xFF);
+ // enable required radio IRQs
+ writeReg(LORARegIrqFlagsMask, ~rxlorairqmask[rxmode]);
+
+ // enable antenna switch for RX
+ hal_pin_rxtx(0);
+
+ // now instruct the radio to receive
+ if (rxmode == RXMODE_SINGLE) { // single rx
+ hal_waitUntil(LMIC.rxtime); // busy wait until exact rx time
+ opmode(OPMODE_RX_SINGLE);
+ } else { // continous rx (scan or rssi)
+ opmode(OPMODE_RX);
+ }
+}
+
+static void rxfsk (u1_t rxmode) {
+ // only single rx (no continuous scanning, no noise sampling)
+ ASSERT( rxmode == RXMODE_SINGLE );
+ // select FSK modem (from sleep mode)
+ //writeReg(RegOpMode, 0x00); // (not LoRa)
+ opmodeFSK();
+ ASSERT((readReg(RegOpMode) & OPMODE_LORA) == 0);
+ // enter standby mode (warm up))
+ opmode(OPMODE_STANDBY);
+ // configure frequency
+ configChannel();
+ // set LNA gain
+ //writeReg(RegLna, 0x20|0x03); // max gain, boost enable
+ writeReg(RegLna, LNA_RX_GAIN);
+ // configure receiver
+ writeReg(FSKRegRxConfig, 0x1E); // AFC auto, AGC, trigger on preamble?!?
+ // set receiver bandwidth
+ writeReg(FSKRegRxBw, 0x0B); // 50kHz SSb
+ // set AFC bandwidth
+ writeReg(FSKRegAfcBw, 0x12); // 83.3kHz SSB
+ // set preamble detection
+ writeReg(FSKRegPreambleDetect, 0xAA); // enable, 2 bytes, 10 chip errors
+ // set sync config
+ writeReg(FSKRegSyncConfig, 0x12); // no auto restart, preamble 0xAA, enable, fill FIFO, 3 bytes sync
+ // set packet config
+ writeReg(FSKRegPacketConfig1, 0xD8); // var-length, whitening, crc, no auto-clear, no adr filter
+ writeReg(FSKRegPacketConfig2, 0x40); // packet mode
+ // set sync value
+ writeReg(FSKRegSyncValue1, 0xC1);
+ writeReg(FSKRegSyncValue2, 0x94);
+ writeReg(FSKRegSyncValue3, 0xC1);
+ // set preamble timeout
+ writeReg(FSKRegRxTimeout2, 0xFF);//(LMIC.rxsyms+1)/2);
+ // set bitrate
+ writeReg(FSKRegBitrateMsb, 0x02); // 50kbps
+ writeReg(FSKRegBitrateLsb, 0x80);
+ // set frequency deviation
+ writeReg(FSKRegFdevMsb, 0x01); // +/- 25kHz
+ writeReg(FSKRegFdevLsb, 0x99);
+
+ // configure DIO mapping DIO0=PayloadReady DIO1=NOP DIO2=TimeOut
+ writeReg(RegDioMapping1, MAP_DIO0_FSK_READY|MAP_DIO1_FSK_NOP|MAP_DIO2_FSK_TIMEOUT);
+
+ // enable antenna switch for RX
+ hal_pin_rxtx(0);
+
+ // now instruct the radio to receive
+ hal_waitUntil(LMIC.rxtime); // busy wait until exact rx time
+ opmode(OPMODE_RX); // no single rx mode available in FSK
+}
+
+static void startrx (u1_t rxmode) {
+ ASSERT( (readReg(RegOpMode) & OPMODE_MASK) == OPMODE_SLEEP );
+ if(getSf(LMIC.rps) == FSK) { // FSK modem
+ rxfsk(rxmode);
+ } else { // LoRa modem
+ rxlora(rxmode);
+ }
+ // the radio will go back to STANDBY mode as soon as the RX is finished
+ // or timed out, and the corresponding IRQ will inform us about completion.
+}
+
+// get random seed from wideband noise rssi
+void radio_init (void) {
+ hal_disableIRQs();
+
+ // manually reset radio
+#ifdef CFG_sx1276_radio
+ hal_pin_rst(0); // drive RST pin low
+#else
+ hal_pin_rst(1); // drive RST pin high
+#endif
+ hal_waitUntil(os_getTime()+ms2osticks(1)); // wait >100us
+ hal_pin_rst(2); // configure RST pin floating!
+ hal_waitUntil(os_getTime()+ms2osticks(5)); // wait 5ms
+
+ opmode(OPMODE_SLEEP);
+ // some sanity checks, e.g., read version number
+ u1_t v = readReg(RegVersion);
+#ifdef CFG_sx1276_radio
+ ASSERT(v == 0x12 );
+#elif CFG_sx1272_radio
+ ASSERT(v == 0x22);
+#else
+#error Missing CFG_sx1272_radio/CFG_sx1276_radio
+#endif
+ // seed 15-byte randomness via noise rssi
+ rxlora(RXMODE_RSSI);
+ while( (readReg(RegOpMode) & OPMODE_MASK) != OPMODE_RX ); // continuous rx
+ for(int i=1; i<16; i++) {
+ for(int j=0; j<8; j++) {
+ u1_t b; // wait for two non-identical subsequent least-significant bits
+ while( (b = readReg(LORARegRssiWideband) & 0x01) == (readReg(LORARegRssiWideband) & 0x01) );
+ randbuf[i] = (randbuf[i] << 1) | b;
+ }
+ }
+ randbuf[0] = 16; // set initial index
+
+#ifdef CFG_sx1276_radio
+ // chain calibration
+ writeReg(RegPaConfig, 0);
+
+ // Launch Rx chain calibration for LF band
+ writeReg(FSKRegImageCal, (readReg(FSKRegImageCal) & RF_IMAGECAL_IMAGECAL_MASK)|RF_IMAGECAL_IMAGECAL_START);
+ while((readReg(FSKRegImageCal)&RF_IMAGECAL_IMAGECAL_RUNNING) == RF_IMAGECAL_IMAGECAL_RUNNING){ ; }
+
+ // Sets a Frequency in HF band
+ u4_t frf = 868000000;
+ writeReg(RegFrfMsb, (u1_t)(frf>>16));
+ writeReg(RegFrfMid, (u1_t)(frf>> 8));
+ writeReg(RegFrfLsb, (u1_t)(frf>> 0));
+
+ // Launch Rx chain calibration for HF band
+ writeReg(FSKRegImageCal, (readReg(FSKRegImageCal) & RF_IMAGECAL_IMAGECAL_MASK)|RF_IMAGECAL_IMAGECAL_START);
+ while((readReg(FSKRegImageCal) & RF_IMAGECAL_IMAGECAL_RUNNING) == RF_IMAGECAL_IMAGECAL_RUNNING) { ; }
+#endif /* CFG_sx1276_radio */
+
+ opmode(OPMODE_SLEEP);
+ hal_enableIRQs();
+}
+
+// return next random byte derived from seed buffer
+// (buf[0] holds index of next byte to be returned)
+u1_t radio_rand1 (void) {
+ u1_t i = randbuf[0];
+ ASSERT( i != 0 );
+ if( i==16 ) {
+ os_aes(AES_ENC, randbuf, 16); // encrypt seed with any key
+ i = 0;
+ }
+ u1_t v = randbuf[i++];
+ randbuf[0] = i;
+ return v;
+}
+
+u1_t radio_rssi (void) {
+ hal_disableIRQs();
+ u1_t r = readReg(LORARegRssiValue);
+ hal_enableIRQs();
+ return r;
+}
+
+static const u2_t LORA_RXDONE_FIXUP[] = {
+ [FSK] = us2osticks(0), // ( 0 ticks)
+ [SF7] = us2osticks(0), // ( 0 ticks)
+ [SF8] = us2osticks(1648), // ( 54 ticks)
+ [SF9] = us2osticks(3265), // ( 107 ticks)
+ [SF10] = us2osticks(7049), // ( 231 ticks)
+ [SF11] = us2osticks(13641), // ( 447 ticks)
+ [SF12] = us2osticks(31189), // (1022 ticks)
+};
+
+// called by hal ext IRQ handler
+// (radio goes to stanby mode after tx/rx operations)
+void radio_irq_handler (u1_t dio) {
+ ostime_t now = os_getTime();
+ if( (readReg(RegOpMode) & OPMODE_LORA) != 0) { // LORA modem
+ u1_t flags = readReg(LORARegIrqFlags);
+ if( flags & IRQ_LORA_TXDONE_MASK ) {
+ // save exact tx time
+ LMIC.txend = now - us2osticks(43); // TXDONE FIXUP
+ } else if( flags & IRQ_LORA_RXDONE_MASK ) {
+ // save exact rx time
+ LMIC.rxtime = now - LORA_RXDONE_FIXUP[getSf(LMIC.rps)];
+ // read the PDU and inform the MAC that we received something
+ LMIC.dataLen = (readReg(LORARegModemConfig1) & SX1272_MC1_IMPLICIT_HEADER_MODE_ON) ?
+ readReg(LORARegPayloadLength) : readReg(LORARegRxNbBytes);
+ // set FIFO read address pointer
+ writeReg(LORARegFifoAddrPtr, readReg(LORARegFifoRxCurrentAddr));
+ // now read the FIFO
+ readBuf(RegFifo, LMIC.frame, LMIC.dataLen);
+ // read rx quality parameters
+ LMIC.rxq.snr = readReg(LORARegPktSnrValue); // SNR [dB] * 4
+ LMIC.rxq.rssi = readReg(LORARegPktRssiValue) - 125 + 64; // RSSI [dBm] (-196...+63)
+ } else if( flags & IRQ_LORA_RXTOUT_MASK ) {
+ // indicate timeout
+ LMIC.dataLen = 0;
+ }
+ // mask all radio IRQs
+ writeReg(LORARegIrqFlagsMask, 0xFF);
+ // clear radio IRQ flags
+ writeReg(LORARegIrqFlags, 0xFF);
+ } else { // FSK modem
+ u1_t flags1 = readReg(FSKRegIrqFlags1);
+ u1_t flags2 = readReg(FSKRegIrqFlags2);
+ if( flags2 & IRQ_FSK2_PACKETSENT_MASK ) {
+ // save exact tx time
+ LMIC.txend = now;
+ } else if( flags2 & IRQ_FSK2_PAYLOADREADY_MASK ) {
+ // save exact rx time
+ LMIC.rxtime = now;
+ // read the PDU and inform the MAC that we received something
+ LMIC.dataLen = readReg(FSKRegPayloadLength);
+ // now read the FIFO
+ readBuf(RegFifo, LMIC.frame, LMIC.dataLen);
+ // read rx quality parameters
+ LMIC.rxq.snr = 0; // determine snr
+ LMIC.rxq.rssi = 0; // determine rssi
+ } else if( flags1 & IRQ_FSK1_TIMEOUT_MASK ) {
+ // indicate timeout
+ LMIC.dataLen = 0;
+ } else {
+ while(1);
+ }
+ }
+ // go from stanby to sleep
+ opmode(OPMODE_SLEEP);
+ // run os job (use preset func ptr)
+ os_setCallback(&LMIC.osjob, LMIC.osjob.func);
+}
+
+void os_radio (u1_t mode) {
+ hal_disableIRQs();
+ switch (mode) {
+ case RADIO_RST:
+ // put radio to sleep
+ opmode(OPMODE_SLEEP);
+ break;
+
+ case RADIO_TX:
+ // transmit frame now
+ starttx(); // buf=LMIC.frame, len=LMIC.dataLen
+ break;
+
+ case RADIO_RX:
+ // receive frame now (exactly at rxtime)
+ startrx(RXMODE_SINGLE); // buf=LMIC.frame, time=LMIC.rxtime, timeout=LMIC.rxsyms
+ break;
+
+ case RADIO_RXON:
+ // start scanning for beacon now
+ startrx(RXMODE_SCAN); // buf=LMIC.frame
+ break;
+ }
+ hal_enableIRQs();
+}
+
+#endif // USE_SMTC_RADIO_DRIVER