Ozzy Chiu

Important changes to forums and questions

All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.

6 years, 6 months ago.

Use the nu-link on M453 board to program the external M451 board my own.

Hi, I made a M451 board and reserved the pinout for mbed ICE (VCC, SWDIO, SWCLK, RESET, GND, UART_TX, UART_RX). I want to use the ICE on the PFM-M453 to program the external M451 board my own. How do I rework the PFM-M453 board. Thanks.

Question relating to:

Last updated: 28 Jun 2021
The NuMaker Platform is an Internet of Things (IoT) application focused platform specially developed by Nuvoton. It supports ARM mbed OS 5.0 as well as Arduino interface, and is ideal …

1 Answer

Dylan Hseih
6 years, 6 months ago.

The best way is purchase the Nu-Link from our website [Nuvoton Direct] and use the "NuMicro ICP Programming Tool" we provided to program the M451 board you made .

Otherwise you need to cut the line on the NuMaker-PFM-M453 to disconnect the link between ICE and the NuMaker-PFM-M453 then connect the ICE interface(VCC, SWDIO, SWCLK, RESET, GND, UART_TX, UART_RX) to your board, but it's not highly recommended.

Accepted Answer