Mistake on this page?
Report an issue in GitHub or email us

Manual installation

1. Install dependencies

Instructions for Windows

  1. Download and install Python 2.7.x (which includes pip).
  2. Download and install Git (versions 1.9.5 or later are supported).
  3. Download and install Mercurial (versions 2.2.2 or later are supported).

Instructions for macOS

  1. macOS 10.8 and later comes with Python 2.7 preinstalled.

    • If you are using the preinstalled version but need to install pip, you can run the following command (taken from the pip installation guide):
       curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
       python get-pip.py
      
    • If you are running an earlier version of macOS, download and install Python from the official website. This package includes pip.
  2. Download and install Git (versions 1.9.5 or later are supported).

  3. Download and install Mercurial (versions 2.2.2 or later are supported).

Instructions for Linux

Linux distributions typically manage software through package managers. The specific commands to install the dependencies will vary depending on your distribution. Please see your distribution's documentation for more information.

As an example, the following is a command to install all dependencies on Ubuntu:

sudo apt install python2.7 python-pip git mercurial

2. Install Mbed CLI

To install Mbed CLI with pip:

pip install mbed-cli

To verify Mbed CLI installed correctly, run mbed --help.

To update Mbed CLI, run:

pip install -U mbed-cli

3. Install a compiler

Download and install one of the following compilers: GCC Arm, Arm Compiler 5, Arm Compiler 6 or IAR.

Note: When installing the Arm Compiler 5 on a 64-bit Linux system, you may also need to install the i386 architecture package. As as example on Ubuntu:

$ sudo dpkg --add-architecture i386
$ sudo apt-get update
$ sudo apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386

4. Configure the compiler location

To build project, Mbed CLI needs to know where the compiler is installed. It checks three configuration options in the following order:

  1. Mbed CLI config (local first, then global).
  2. Environment variables.
  3. System path.

Configure compiler location with Mbed CLI

If you cannot place the compiler in the system PATH, or if you have to use a different version of the compiler than the one in your system path, you must configure the location of the compiler with Mbed CLI. Use the mbed config command to set the compiler's location:

$ mbed config -G ARM_PATH "C:\Program Files\ARM"
[mbed] C:\Program Files\ARM now set as global ARM_PATH

The -G argument sets the location globally, so that it applies to all projects. You can omit the argument if you are configuring a compiler location for a specific project.

Mbed CLI supports a setting for each toolchain path:

Toolchain Setting name Example binary location Example path
Arm Compiler 5.06u6 ARM_PATH C:\Program Files\ARM_Compiler_5.06u6\bin\armcc C:\Program Files\ARM_Compiler_5.06u6
Arm Compiler 6.11 ARMC6_PATH C:\Program Files\ARMCompiler6.11\bin\armclang C:\Program Files\ARMCompiler6.11\bin
IAR EWARM Compiler 8.32.1 IAR_PATH C:\Program Files\IAR Systems\Embedded Workbench 8.2\arm\bin\iccarm.exe C:\Program Files\IAR Systems\Embedded Workbench 8.2\arm
GCC Arm Embedded Compiler GCC_ARM_PATH /usr/bin/arm-none-eabi-gcc /usr/bin

Configure compiler location with environment variables

You can set the location of the compiler with environment variables. Use the path listed in the previous section Configuring compiler location with Mbed CLI.

Toolchain Environment variable
Arm Compiler 5 MBED_ARM_PATH
Arm Compiler 6 MBED_ARMC6_PATH
IAR EWARM Compiler MBED_IAR_PATH
GCC Arm Embedded Compiler MBED_GCC_ARM_PATH

Install compilers in the system PATH

Installing the compilers in the system PATH will allow the tools to automatically discover the compilers without further configuration. Most compiler installers have an option to add the compiler to the system PATH for you.

Optional configuration

Bash completion

To install mbed-cli bash completion:

  1. Clone the Mbed CLI repository: git clone https://github.com/ARMmbed/mbed-cli.
  2. Navigate to the mbed-cli/tools/bash_completion directory.
  3. Copy the mbed script into the ~/.bash_completion.d directory (you may need to create this directory first).
  4. Restart the terminal.
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.